72 Fleetside Plastic model kit on ebay -cool - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70c10 · 04-23-2002, 12:30 PM

Hey guys,
Check this auction out on ebay!. I have never seen these models for our trucks. The guy selling it has a GMC stepside also.http://cgi.ebay.com/ws/ebayISAPI.dll?ViewItem&item=1724605676&r=0&t=0

**CPNE** · 04-23-2002, 12:34 PM

Check out Wal-Mart I bought that model a few years ago there for $8.00. Still see it on the shelves from time-to-time.

70c10 · 04-23-2002, 12:39 PM

I was at Carlisle this weekend and couldn't find anything like these for our trucks. I might have to get this then paint it to match my 70'!

Alex · 04-23-2002, 04:18 PM

I have the same model at home. Still see it once in a while on the shelves. Funny thing about that one is in the pictures, the engine emblem shows 8-400 while the actual emblem in the box says 8-350. Wasn't too happy as I wanted to make it look like mine which has a 402. Still haven't gotten around to putting it together.

Longhorn Man · 04-23-2002, 04:41 PM

I built that one...didn't care for the fit and finish.

http://cgi.ebay.com/ws/ebayISAPI.dll...605676&r=0&t=0

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

Bill72BB · 04-23-2002, 05:01 PM

I got a built one sitting on top of my monitor .Like longhorn said the fit is soso .Got mine from Fred models on the net for 7.00 .Painted it the color I hope to paint my truck in the near future .

Bill

------------------
72 3/4ton Custom Camper BB,400 air,ps,pb,leafsprings
tilt,3.54 . 82 chevy silverado sb ,ps,pb pw,pd,air 350/350 Flowmaster 40.
Torrance Calif.

" If I knew I was going to live this long I would have taken better care of myself "

texnician01 · 04-24-2002, 10:52 AM

im in the process of building one. cut the grille to be a 69-70 grille and put an inline 6 from another truck model in it cause that's what mine has. I started the model when I got my truck so it is like original but now I am modifying my truck. Maybe I'll have to do one before and one after?

------------------
1969 C-10 292 I-6 4 spd in the middle of a restoration. going to get a 327 and 3.07 gears but keeping all of the original parts so I can put it back to original later on down the road.
55 chevy 4 door 150
47 Willys CJ-2A

dubie · 04-24-2002, 11:11 AM

Here are a few pics of the one i put together
[img]http://communities.msn.com/_Secure/0MwBlO8AQQ5YvoK*OHFCwpUnAFhdz75zHzXuOItop9nGP6tODD9fdwKUomuaWg3PpZCadvVQGW2SSG8p2A6IsCA/72-fleet.jpg[/img]
Had to experiment
[img]http://communities.msn.com/_Secure/0NQAAAIIR!bsvoK*OHFCwpVGcijY4oatAiJHC*bLwtkek4BdbGPgOfb2LoZnsnALeAoxHeLUItaztoeT3OhwvXw/72-flatbed.jpg[/img]
The engine
[img]http://communities.msn.com/_Secure/0NQAAAFYRLLUS9HjQNthaTBHValUJIuRD*FeQym8iCMjc77YLClaw8VABH4c*7NjhG75f5RY!oI3cF8Ic6iSOew/72-engine0.jpg[/img]
color change
[img]http://communities.msn.com/_Secure/0LwAAAFgQ8H*FPIGr7p8CFW7HE*6B9zAWMhculPXXNOmmqcCJLlJHyfO5jObA9UUCbo9FuSLjmmM/purple.jpg[/img]

What do you guys think?

------------------
72 C/10 LWB 2wd
250 inline 6, 3 speed column shift. Soon to have a total facelift.

Longhorn Man · 04-24-2002, 08:42 PM

Pretty d@mn nice. Good fab skills ont he flat bed too.
If you mix flat black with thinner, you can fill in the 'holes' in the grill while leaving the chrome on the grill.
Comes out sweet, but I'd try it on junk parts first.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

toms68cst · 04-24-2002, 09:47 PM

I've got a half assembled one of those setting in a box. I tried to do the two-tone white/red stock combo but the colors kept running together. I got frustrated and gave up for now. I guess I'll never be a body man!

------------------
Unrestored 68 C-10 CST. 327 4-Speed. 48,000 miles.
Bismarck, ND

See My truck and rare 1967 prototype pictures at:
http://community.webshots.com/user/toms68cst

MSN Messeger: toms68cst@hotmail.com

04-23-2002, 12:30 PM	#1
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	72 Fleetside Plastic model kit on ebay -cool Hey guys, Check this auction out on ebay!. I have never seen these models for our trucks. The guy selling it has a GMC stepside also.http://cgi.ebay.com/ws/ebayISAPI.dll?ViewItem&item=1724605676&r=0&t=0 __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-23-2002, 12:34 PM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Check out Wal-Mart I bought that model a few years ago there for $8.00. Still see it on the shelves from time-to-time. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

04-23-2002, 12:39 PM	#3
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	I was at Carlisle this weekend and couldn't find anything like these for our trucks. I might have to get this then paint it to match my 70'! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

04-23-2002, 04:18 PM	#4
Alex Registered User Join Date: Jan 2000 Location: Blaine, MN Posts: 798	I have the same model at home. Still see it once in a while on the shelves. Funny thing about that one is in the pictures, the engine emblem shows 8-400 while the actual emblem in the box says 8-350. Wasn't too happy as I wanted to make it look like mine which has a 402. Still haven't gotten around to putting it together. __________________ '72 C/10 LWB 402/400 Blaine, MN

04-23-2002, 05:01 PM	#6
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	I got a built one sitting on top of my monitor .Like longhorn said the fit is soso .Got mine from Fred models on the net for 7.00 .Painted it the color I hope to paint my truck in the near future . Bill ------------------ 72 3/4ton Custom Camper BB,400 air,ps,pb,leafsprings tilt,3.54 . 82 chevy silverado sb ,ps,pb pw,pd,air 350/350 Flowmaster 40. Torrance Calif. " If I knew I was going to live this long I would have taken better care of myself " __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

04-23-2002, 04:41 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	I built that one...didn't care for the fit and finish. http://cgi.ebay.com/ws/ebayISAPI.dll...605676&r=0&t=0 ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

04-24-2002, 10:52 AM	#7
texnician01 Senior Member Join Date: Mar 2002 Location: 12 Miles South of Des Moines, Iowa Posts: 359	im in the process of building one. cut the grille to be a 69-70 grille and put an inline 6 from another truck model in it cause that's what mine has. I started the model when I got my truck so it is like original but now I am modifying my truck. Maybe I'll have to do one before and one after? ------------------ 1969 C-10 292 I-6 4 spd in the middle of a restoration. going to get a 327 and 3.07 gears but keeping all of the original parts so I can put it back to original later on down the road. 55 chevy 4 door 150 47 Willys CJ-2A __________________ 69 C-10, 340HP 327 55 chevy 4 door 150 47 Willys CJ-2A 05 Harley Night Train 06 1200 Sportster (Wife's bike) 70 Honda CL350 OIF2 & OIF7 Veteran Nathan & Tiffany

04-24-2002, 11:11 AM	#8
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	Here are a few pics of the one i put together [img]http://communities.msn.com/_Secure/0MwBlO8AQQ5YvoKOHFCwpUnAFhdz75zHzXuOItop9nGP6tODD9fdwKUomuaWg3PpZCadvVQGW2SSG8p2A6IsCA/72-fleet.jpg[/img] Had to experiment [img]http://communities.msn.com/_Secure/0NQAAAIIR!bsvoKOHFCwpVGcijY4oatAiJHCbLwtkek4BdbGPgOfb2LoZnsnALeAoxHeLUItaztoeT3OhwvXw/72-flatbed.jpg[/img] The engine [img]http://communities.msn.com/_Secure/0NQAAAFYRLLUS9HjQNthaTBHValUJIuRDFeQym8iCMjc77YLClaw8VABH4c7NjhG75f5RY!oI3cF8Ic6iSOew/72-engine0.jpg[/img] color change [img]http://communities.msn.com/_Secure/0LwAAAFgQ8HFPIGr7p8CFW7HE*6B9zAWMhculPXXNOmmqcCJLlJHyfO5jObA9UUCbo9FuSLjmmM/purple.jpg[/img] What do you guys think? ------------------ 72 C/10 LWB 2wd 250 inline 6, 3 speed column shift. Soon to have a total facelift. __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

04-24-2002, 08:42 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Pretty d@mn nice. Good fab skills ont he flat bed too. If you mix flat black with thinner, you can fill in the 'holes' in the grill while leaving the chrome on the grill. Comes out sweet, but I'd try it on junk parts first. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

04-24-2002, 09:47 PM	#10
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,296	I've got a half assembled one of those setting in a box. I tried to do the two-tone white/red stock combo but the colors kept running together. I got frustrated and gave up for now. I guess I'll never be a body man! ------------------ Unrestored 68 C-10 CST. 327 4-Speed. 48,000 miles. Bismarck, ND See My truck and rare 1967 prototype pictures at: http://community.webshots.com/user/toms68cst MSN Messeger: toms68cst@hotmail.com __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.