Few parts for sale/trade ARIZONA - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hotrodhenryj · 02-20-2006, 02:34 PM

I have three sets of linkage for auto with 350, no trans bracket. 35ea
Rear fender flaps, nice rust free 35. set
Pass side bed wheel well 40.
Trans tunnel covers 25.ea
Front bed panel for steel floor 50.
67 Choke assembly 25.
PS gear boxes 40.
All plus shipping

I also have lots of the factory AC setups, one complete and others for indivual parts, if your needing anything ask as I probably have it.

For anyone local I still have a nice pair of 72 doors 100ea
68 wooden long bed box with gate 350
72 rust free radiator support 100
Complete front crossmember w/disc 100
Fenders 75
67-8 hoods 75
Any of the parts above are also for trade for the intake I need or Holley, Edelbrock carb. Also looking for nice black 72 only door panels.

I am needing an aftermarket intake for the new style small block with the bolt holes that are straight up for an Edelbrock or Holley carb, not the 23 degree heads, the TBI motor, Vortec? Someone clarify what degree heads these are please, I cant seem to remember.

Any of the parts above are also for trade for the intake I need or Holley, Edelbrock carb. Also looking for nice black 72 only door panels. Thanks, Chuck

jsbgump · 02-20-2006, 02:51 PM

On the 67-68 hood do any have the holes for the chrome hood bar?

Hotrodhenryj · 02-20-2006, 03:43 PM

I have one of each(chrome and non), but don't quite fit your criteria for condition. Both have original paint but have a few dings that need attentiion and the paint is faded badly.

jsbgump · 02-20-2006, 04:06 PM

Ok thanks

Huskerboy2 · 02-20-2006, 07:03 PM

If the choke cable is in good shape, I'll take it. Is that everthing needed to put a choke in a truck that didn't have one previously? Thanks.

6T8 · 02-21-2006, 02:41 AM

Chuck, if you still have orange tunnel cover on your next trip to Tucson I'll take it. I could meet you on freeway like last time. Thanks.....Rick

Hotrodhenryj · 02-21-2006, 11:45 AM

Huskerboy2: I think that it is complete as it has the carb mount needed to secure it. You would need the carb that has the manual choke horn for it to work.

6T8: I'll send you a PM

stepn67 · 02-21-2006, 06:44 PM

Is the crossmemeber/ disk from 71-72 or later?

Huskerboy2 · 02-21-2006, 07:08 PM

Thanks Chuck. I don't have the right choke setup for the choke cable. I'm going to pass. Thanks anyway.

Hotrodhenryj · 02-21-2006, 07:58 PM

Stepn67: This is a complete crossmember removed from a 72 Cheyenne.

generalgob · 02-23-2006, 08:48 PM

what year is the motor that you need the intake for

al's71gmc · 02-23-2006, 10:10 PM

PM sent for A/C parts.

Hotrodhenryj · 02-23-2006, 10:55 PM

The motor is an 86 with the TBI carb setup.

Al I PM'ed you back.

generalgob · 02-24-2006, 07:54 PM

not sure the degree but i do have the part numbers for brand new intakes here the performer part number for the eps intake is edl-2701 standard finish is 105.95 permastar finish is 177.95 and endurashine is 177.95 at parr automotive here.

**67 cst swb** · 02-28-2006, 03:22 AM

I'd possibly be interested in the doors. I have a friend in Glendale that could pick-up for me. Then bring to me later this summer...
How nice are they. Any dings, dents, or rust?

02-20-2006, 02:34 PM	#1
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Few parts for sale/trade ARIZONA I have three sets of linkage for auto with 350, no trans bracket. 35ea Rear fender flaps, nice rust free 35. set Pass side bed wheel well 40. Trans tunnel covers 25.ea Front bed panel for steel floor 50. 67 Choke assembly 25. PS gear boxes 40. All plus shipping I also have lots of the factory AC setups, one complete and others for indivual parts, if your needing anything ask as I probably have it. For anyone local I still have a nice pair of 72 doors 100ea 68 wooden long bed box with gate 350 72 rust free radiator support 100 Complete front crossmember w/disc 100 Fenders 75 67-8 hoods 75 Any of the parts above are also for trade for the intake I need or Holley, Edelbrock carb. Also looking for nice black 72 only door panels. I am needing an aftermarket intake for the new style small block with the bolt holes that are straight up for an Edelbrock or Holley carb, not the 23 degree heads, the TBI motor, Vortec? Someone clarify what degree heads these are please, I cant seem to remember. Any of the parts above are also for trade for the intake I need or Holley, Edelbrock carb. Also looking for nice black 72 only door panels. Thanks, Chuck Attached Images __________________ Arizona rust free sheetmetal

02-20-2006, 02:51 PM	#2
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Few parts for sale/trade ARIZONA On the 67-68 hood do any have the holes for the chrome hood bar? __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

02-20-2006, 03:43 PM	#3
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Re: Few parts for sale/trade ARIZONA I have one of each(chrome and non), but don't quite fit your criteria for condition. Both have original paint but have a few dings that need attentiion and the paint is faded badly. __________________ Arizona rust free sheetmetal

02-20-2006, 04:06 PM	#4
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Few parts for sale/trade ARIZONA Ok thanks __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

02-20-2006, 07:03 PM	#5
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: Few parts for sale/trade ARIZONA If the choke cable is in good shape, I'll take it. Is that everthing needed to put a choke in a truck that didn't have one previously? Thanks. __________________ '72 Chevy Blazer

02-21-2006, 02:41 AM	#6
6T8 Active Member Join Date: Dec 2004 Location: Tucson, AZ Posts: 233	Re: Few parts for sale/trade ARIZONA Chuck, if you still have orange tunnel cover on your next trip to Tucson I'll take it. I could meet you on freeway like last time. Thanks.....Rick

02-21-2006, 11:45 AM	#7
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Re: Few parts for sale/trade ARIZONA Huskerboy2: I think that it is complete as it has the carb mount needed to secure it. You would need the carb that has the manual choke horn for it to work. 6T8: I'll send you a PM __________________ Arizona rust free sheetmetal

02-21-2006, 06:44 PM	#8
stepn67 Junior Member Join Date: Dec 2002 Location: Tucson, AZ Posts: 140	Re: Few parts for sale/trade ARIZONA Is the crossmemeber/ disk from 71-72 or later?

02-21-2006, 07:08 PM	#9
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: Few parts for sale/trade ARIZONA Thanks Chuck. I don't have the right choke setup for the choke cable. I'm going to pass. Thanks anyway. __________________ '72 Chevy Blazer

02-21-2006, 07:58 PM	#10
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Re: Few parts for sale/trade ARIZONA Stepn67: This is a complete crossmember removed from a 72 Cheyenne. Attached Images __________________ Arizona rust free sheetmetal

02-23-2006, 08:48 PM	#11
generalgob Registered User Join Date: Dec 2005 Location: moore oklahoma Posts: 6	Re: Few parts for sale/trade ARIZONA what year is the motor that you need the intake for __________________ 1970 C-10

02-23-2006, 10:10 PM	#12
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	Re: Few parts for sale/trade ARIZONA PM sent for A/C parts. __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!!

02-23-2006, 10:55 PM	#13
Hotrodhenryj Truck Farmer Join Date: Nov 2001 Location: Lake Havasu City, Arizona Posts: 1,192	Re: Few parts for sale/trade ARIZONA The motor is an 86 with the TBI carb setup. Al I PM'ed you back. __________________ Arizona rust free sheetmetal

02-24-2006, 07:54 PM	#14
generalgob Registered User Join Date: Dec 2005 Location: moore oklahoma Posts: 6	Re: Few parts for sale/trade ARIZONA not sure the degree but i do have the part numbers for brand new intakes here the performer part number for the eps intake is edl-2701 standard finish is 105.95 permastar finish is 177.95 and endurashine is 177.95 at parr automotive here. __________________ 1970 C-10

02-28-2006, 03:22 AM	#15
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: Few parts for sale/trade ARIZONA I'd possibly be interested in the doors. I have a friend in Glendale that could pick-up for me. Then bring to me later this summer... How nice are they. Any dings, dents, or rust? __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.