How Far under the Kick panel does floor pan sit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pound41** · 02-28-2006, 10:31 PM

Putting in floor pans in my blazer and it seems like the pan is made to sit about an inch under the kick panel at the top end. Is that right? The floor was bad at the seam and the kick panel was gone at bottom so hard to tell.
Thanks

red71cheyenne · 03-01-2006, 10:25 PM

Pay no attention to the nasty looking welds, as I'm still not too good at it, but you can see where the floor panel and kick panel come together. The kick panel actually runs down below the floor pan for about a half inch. I just duplicated the rusted out portion and added it in. Jeff.

02-28-2006, 10:31 PM	#1
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,269	How Far under the Kick panel does floor pan sit Putting in floor pans in my blazer and it seems like the pan is made to sit about an inch under the kick panel at the top end. Is that right? The floor was bad at the seam and the kick panel was gone at bottom so hard to tell. Thanks

03-01-2006, 10:25 PM	#2
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: How Far under the Kick panel does floor pan sit Pay no attention to the nasty looking welds, as I'm still not too good at it, but you can see where the floor panel and kick panel come together. The kick panel actually runs down below the floor pan for about a half inch. I just duplicated the rusted out portion and added it in. Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty Last edited by red71cheyenne; 10-04-2007 at 08:37 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.