Spring alignment pins - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gregbr · 03-04-2006, 07:26 AM

Anybody know where to buy replacement alignment pins for leaf springs? This is the pin that aligns the spring with the axle. Thanks, Greg

tphsmith · 03-04-2006, 08:02 AM

I could be very wrong, but I thought there is a shop on the east side of 77 on celenese road for spring remans.

4x4Poet · 03-04-2006, 02:09 PM

If you mean the springs "center pin", then most any auto parts store would have them. Just need to know the diameter since you'll cut off the length to match. If no go at NAPA, et al, a spring shop will have them in abundance.

gregbr · 03-04-2006, 04:57 PM

Yes, the center pin is what I need. Don't know of any local spring shops. Thanks, Greg

FRENCHBLUE72 · 03-04-2006, 05:52 PM

Any 4wd shop should be able to help you out..

03-04-2006, 07:26 AM	#1
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Spring alignment pins Anybody know where to buy replacement alignment pins for leaf springs? This is the pin that aligns the spring with the axle. Thanks, Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

03-04-2006, 08:02 AM	#2
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: Spring alignment pins I could be very wrong, but I thought there is a shop on the east side of 77 on celenese road for spring remans. __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

03-04-2006, 02:09 PM	#3
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	Re: Spring alignment pins If you mean the springs "center pin", then most any auto parts store would have them. Just need to know the diameter since you'll cut off the length to match. If no go at NAPA, et al, a spring shop will have them in abundance. __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.

03-04-2006, 04:57 PM	#4
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: Spring alignment pins Yes, the center pin is what I need. Don't know of any local spring shops. Thanks, Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

03-04-2006, 05:52 PM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Spring alignment pins Any 4wd shop should be able to help you out.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.