Found this band on my bench seat... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

boraxman · 03-03-2006, 01:00 AM

attached to the springs in the back right before I sold it. Never seen it discussed here before. It has 2 sets of numbers: 9 17 69, build date? Trucks a '70 Other set: D&L 3954797: no idea what that means.

I also found what was left of the build sheet stuck back there. About the only thing I could make out is that my truck was built in Fremont, Ca.

Longhorn Man · 03-03-2006, 03:39 PM

I've seen the tag before, and you are dead on with the first code... build date. No idea on the second one though.

shifty · 03-03-2006, 04:01 PM

i found a similar band wrapped around my tie rod ends (or steering knuckle or something) on my truck when I rebuilt the steerring. Not sure what the heck it was, but it wa very similar - maybe a little smaller.

68 50th · 03-03-2006, 04:20 PM

I also found one in the front suspension: HA 6270375

shifty · 03-03-2006, 05:18 PM

here's the one that was on my spindle or whatever - as described (I couldnt' read it):

ChevLoRay · 03-03-2006, 09:28 PM

They're like the railcar seals we used for years, when I was pre-early-retirement and employed. They're just used to identify "stuff" with whatever the Mfr wants it to identify....part number; date of mfr; whatever. You just have to read them and "go figger".

shifty · 03-04-2006, 07:51 PM

well, that explains it some. but ... but ...

03-03-2006, 01:00 AM	#1
boraxman Keepin an eye out Join Date: Feb 2003 Location: So.Cal Posts: 3,921	Found this band on my bench seat... attached to the springs in the back right before I sold it. Never seen it discussed here before. It has 2 sets of numbers: 9 17 69, build date? Trucks a '70 Other set: D&L 3954797: no idea what that means. I also found what was left of the build sheet stuck back there. About the only thing I could make out is that my truck was built in Fremont, Ca. Attached Images __________________ 1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351 Last edited by boraxman; 03-03-2006 at 01:01 AM.

03-03-2006, 03:39 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Found this band on my bench seat... I've seen the tag before, and you are dead on with the first code... build date. No idea on the second one though.

03-03-2006, 04:01 PM	#3
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: Found this band on my bench seat... i found a similar band wrapped around my tie rod ends (or steering knuckle or something) on my truck when I rebuilt the steerring. Not sure what the heck it was, but it wa very similar - maybe a little smaller. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-03-2006, 04:20 PM	#4
68 50th Senior Member Join Date: Jul 2004 Location: Sweden Posts: 833	Re: Found this band on my bench seat... I also found one in the front suspension: HA 6270375 Attached Images __________________ Mats.. ---------------------------------------------------- 1971 Cheyenne Super Custom Camper 475CBB/TH400/AC 1992 Silverado Sport Truck 1988 Silverado 2500 Ext Longbed 4x4 2001 GMC Sierra SLT 4x4 1990 Chevrolet K3500 1965 Pontiac Grand Prix 1980 Z 28 350/4-speed/AC/T-top 1980 Camaro Coupe V6/3-speed 1979 Buick Century Wagon Last edited by 68 50th; 03-05-2006 at 02:12 AM.

03-03-2006, 05:18 PM	#5
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: Found this band on my bench seat... here's the one that was on my spindle or whatever - as described (I couldnt' read it): __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. Last edited by shifty; 03-03-2006 at 05:19 PM.

03-03-2006, 09:28 PM	#6
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Found this band on my bench seat... They're like the railcar seals we used for years, when I was pre-early-retirement and employed. They're just used to identify "stuff" with whatever the Mfr wants it to identify....part number; date of mfr; whatever. You just have to read them and "go figger". __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

03-04-2006, 07:51 PM	#7
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: Found this band on my bench seat... well, that explains it some. but ... but ... __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.