3 Point Seatbelt????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LANCER · 04-21-2002, 08:26 PM

Can a person install a three point seatbelt in all 67-72 chevy trucks or not?How are they installed ?

------------------
1969 chevy 1/2 ton LB
1992 Chevy 1/2 Ext.Cab
1996 Yamaha Virago 750
Central Minnesota

BUXMAN66 · 04-21-2002, 09:06 PM

yeah,you install the way the seat belts actually look in a late model vehicle.(!!??!!)what is it your trying to ask?

guypm · 04-21-2002, 09:12 PM

i have a set in mine and the come out of a late model truck. 1998 i think. they work and look good. hope this helps,
Guy

LANCER · 04-21-2002, 09:20 PM

I wanted to know if all 67-72 cabs had a place to mount the three point seatbelt.I think the place where it mounts to is called the B post.

BUXMAN66 · 04-21-2002, 09:39 PM

most all of our trucks have the pillar anchor(or "b" pillar) hole threaded to accept the bolt for a shoulder type seatbelt.most of these trucks either have a plastic plug covering the hole or it was covered over w/body work by previous owners. a plastic shroud would cover this bolt head from showing though most likely.

Longhorn Man · 04-21-2002, 10:05 PM

I've never seen one without it.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

**1970 CST Short Wide** · 04-22-2002, 08:22 AM

I have them in my 70. Put them in when my boys started driving. I bought them from the TRUCKSHOP here in Ca. They bolted right in and work perfect, heck I even wear them now.

------------------
Steve's 70 CST
99 Burb (wifes Truck)
www.picturetrail.com/70CST

LANCER · 04-22-2002, 06:15 PM

I called Southern Rod and they said that a three point seatbelt won't work for me because I have a bench seat.Is this true?

------------------
1969 chevy 1/2 ton LB
1992 Chevy 1/2 Ext.Cab
1996 Yamaha Virago 750
Central Minnesota

Longhorn Man · 04-22-2002, 06:31 PM

maybe the one THEY have...but you can use a 3 point harness in a truck.

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

billogna · 04-22-2002, 09:28 PM

These are from a Camaro, but I don't know what year-- I got them at a swap meet. The buckles barely poke through the seat cusions, but they work perfect.

------------------
'69 Chevy Custom/10 SB
'74 GMC Suburban 4x4
'66 Mustang Sprint
'77 Sportster

billogna · 04-22-2002, 09:33 PM

billogna · 04-22-2002, 09:40 PM

busterwivell · 04-23-2002, 08:22 AM

I havea bench seat in my 71, and I got my 3 pt belts from a vender at the LA Roadster show a couple of years ago. No problems.

Bill72BB · 04-23-2002, 09:28 AM

busterwivell;
Do you still have the gas tank behind the seat ?
Can you remember who the vendor was? I go to the LA Roadster show every Fathers Day .

Thamks Bill

------------------
72 3/4ton Custom Camper BB,400 air,ps,pb,leafsprings
tilt,3.54 . 82 chevy silverado sb ,ps,pb pw,pd,air 350/350 Flowmaster 40.
Torrance Calif.

" If I knew I was going to live this long I would have taken better care of myself "

Big69C20 Toy · 04-23-2002, 11:28 AM

I called Southern Rods too and the guy told me the same thing. Due to the hard plastic piece around the female buckle it wont fit through the seat or something right. I still have my pair on order. I'll probly end up cutting the hard plastic off the outside of the female belt so that it will go through the seat. If not then i'll return the dang things. I'll let ya'll know.

------------------
69 Custom 20, 396BB,Longbed fleetside.
New Oak Bed With SS strips... damn nice.

Edelbrock performer RPM-O, Edelbrock 750Carb, Headers, HEI, 2 40" glasspacks.
Stereo: Classic-style tape deck/radio, 2 6x9 Cerwin Vega's in doors, 2 10" Neo subs under seats, 1 900 Watt amp.

SN= Ares220

busterwivell · 04-23-2002, 01:54 PM

Bill72BB, I still have tank in cab.....plan to change out soon. Don't rememberwho it was, but they were under the roof area. I've seen them there again since I bought the belts. As I recall, took some finaglin' on the driver's side to get it to work righ
t, been a few years now. See ya there!
Bill - Tucson

Frank_Zeller · 04-23-2002, 04:03 PM

see these on Ebay all the time.....tempeted to try them
http://cgi.ebay.com/ebaymotors/ws/eb...739467&r=0&t=0

Frank_Zeller · 04-23-2002, 04:08 PM

Someone with tan interior these migh work
http://cgi.ebay.com/ebaymotors/ws/eb...002081&r=0&t=0

Bill72BB · 04-23-2002, 05:05 PM

Frank thanks
Earlier topics indicate the S10 belt will fit if I get the Tan one's and they work will let people know.

Bill

------------------
72 3/4ton Custom Camper BB,400 air,ps,pb,leafsprings
tilt,3.54 . 82 chevy silverado sb ,ps,pb pw,pd,air 350/350 Flowmaster 40.
Torrance Calif.

" If I knew I was going to live this long I would have taken better care of myself "

Brad · 04-23-2002, 06:30 PM

They will work, but see my post a few days ago on the subject.

The pictures above are the same as S-10 belts.

**MikeB** · 04-25-2002, 12:19 PM

Try these guys. http://www.julianos.com/retract_3point.html

04-21-2002, 08:26 PM	#1
LANCER Registered User Join Date: Sep 2001 Location: Osakis,Mn.USA Posts: 93	3 Point Seatbelt????? Can a person install a three point seatbelt in all 67-72 chevy trucks or not?How are they installed ? ------------------ 1969 chevy 1/2 ton LB 1992 Chevy 1/2 Ext.Cab 1996 Yamaha Virago 750 Central Minnesota __________________ 1969 chevy 1/2 ton LB 1992 Chevy 1/2 Ext.Cab 1996 Yamaha Virago 750 Central Minnesota

04-21-2002, 09:06 PM	#2
BUXMAN66 go bucks! Join Date: Jan 2002 Location: MIAMISBURG OHIO USA Posts: 803	yeah,you install the way the seat belts actually look in a late model vehicle.(!!??!!)what is it your trying to ask? __________________ '68 swb 1/2t 350/350th '86 lngbd 3/4 TON parts getter '49 gmc 1/2 t 5 window 350/350th '96 gmc sonoma sle ext-cab. hey it's a 4cyl. 5 spd and good on gas y'know?

04-21-2002, 09:12 PM	#3
guypm Registered User Join Date: Feb 2002 Location: orange, tx usa Posts: 167	i have a set in mine and the come out of a late model truck. 1998 i think. they work and look good. hope this helps, Guy __________________ guypm 1971 SWB Fleetside/350 performer rpm heads &intake/ holley 750dp/1.5roller rockers/MSD6a/700r4 1650stall/one piece driveshaft/3.73 open/dynomax ceramic coated headers/3chamber flowmasters/

04-21-2002, 09:20 PM	#4
LANCER Registered User Join Date: Sep 2001 Location: Osakis,Mn.USA Posts: 93	I wanted to know if all 67-72 cabs had a place to mount the three point seatbelt.I think the place where it mounts to is called the B post. __________________ 1969 chevy 1/2 ton LB 1992 Chevy 1/2 Ext.Cab 1996 Yamaha Virago 750 Central Minnesota

04-21-2002, 09:39 PM	#5
BUXMAN66 go bucks! Join Date: Jan 2002 Location: MIAMISBURG OHIO USA Posts: 803	most all of our trucks have the pillar anchor(or "b" pillar) hole threaded to accept the bolt for a shoulder type seatbelt.most of these trucks either have a plastic plug covering the hole or it was covered over w/body work by previous owners. a plastic shroud would cover this bolt head from showing though most likely. __________________ '68 swb 1/2t 350/350th '86 lngbd 3/4 TON parts getter '49 gmc 1/2 t 5 window 350/350th '96 gmc sonoma sle ext-cab. hey it's a 4cyl. 5 spd and good on gas y'know?

04-21-2002, 10:05 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I've never seen one without it. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

04-22-2002, 08:22 AM	#7
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,150	I have them in my 70. Put them in when my boys started driving. I bought them from the TRUCKSHOP here in Ca. They bolted right in and work perfect, heck I even wear them now. ------------------ Steve's 70 CST 99 Burb (wifes Truck) www.picturetrail.com/70CST __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

04-22-2002, 06:15 PM	#8
LANCER Registered User Join Date: Sep 2001 Location: Osakis,Mn.USA Posts: 93	I called Southern Rod and they said that a three point seatbelt won't work for me because I have a bench seat.Is this true? ------------------ 1969 chevy 1/2 ton LB 1992 Chevy 1/2 Ext.Cab 1996 Yamaha Virago 750 Central Minnesota __________________ 1969 chevy 1/2 ton LB 1992 Chevy 1/2 Ext.Cab 1996 Yamaha Virago 750 Central Minnesota

04-22-2002, 06:31 PM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	maybe the one THEY have...but you can use a 3 point harness in a truck. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio

04-22-2002, 09:28 PM	#10
billogna Registered User Join Date: Apr 2002 Location: Choctaw, OK Posts: 235	These are from a Camaro, but I don't know what year-- I got them at a swap meet. The buckles barely poke through the seat cusions, but they work perfect. ------------------ '69 Chevy Custom/10 SB '74 GMC Suburban 4x4 '66 Mustang Sprint '77 Sportster __________________ '69 Chev Cust/10 swb, 350/700R4, 5"/6" '70 Chev C10 swb, 67 front, 454/700r4, 4"/5" '73 Chev stepper, 350/3 spd '84 Chev K20 350/4 spd '91 GMC 1500 Suburban 4x4, 350/700R4

04-22-2002, 09:33 PM	#11
billogna Registered User Join Date: Apr 2002 Location: Choctaw, OK Posts: 235	__________________ '69 Chev Cust/10 swb, 350/700R4, 5"/6" '70 Chev C10 swb, 67 front, 454/700r4, 4"/5" '73 Chev stepper, 350/3 spd '84 Chev K20 350/4 spd '91 GMC 1500 Suburban 4x4, 350/700R4

04-22-2002, 09:40 PM	#12
billogna Registered User Join Date: Apr 2002 Location: Choctaw, OK Posts: 235	__________________ '69 Chev Cust/10 swb, 350/700R4, 5"/6" '70 Chev C10 swb, 67 front, 454/700r4, 4"/5" '73 Chev stepper, 350/3 spd '84 Chev K20 350/4 spd '91 GMC 1500 Suburban 4x4, 350/700R4

04-23-2002, 08:22 AM	#13
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	I havea bench seat in my 71, and I got my 3 pt belts from a vender at the LA Roadster show a couple of years ago. No problems. __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

04-23-2002, 09:28 AM	#14
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	busterwivell; Do you still have the gas tank behind the seat ? Can you remember who the vendor was? I go to the LA Roadster show every Fathers Day . Thamks Bill ------------------ 72 3/4ton Custom Camper BB,400 air,ps,pb,leafsprings tilt,3.54 . 82 chevy silverado sb ,ps,pb pw,pd,air 350/350 Flowmaster 40. Torrance Calif. " If I knew I was going to live this long I would have taken better care of myself " __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

04-23-2002, 11:28 AM	#15
Big69C20 Toy Livin' it up. Join Date: Nov 2001 Location: Richland, MI Posts: 2,212	I called Southern Rods too and the guy told me the same thing. Due to the hard plastic piece around the female buckle it wont fit through the seat or something right. I still have my pair on order. I'll probly end up cutting the hard plastic off the outside of the female belt so that it will go through the seat. If not then i'll return the dang things. I'll let ya'll know. ------------------ 69 Custom 20, 396BB,Longbed fleetside. New Oak Bed With SS strips... damn nice. Edelbrock performer RPM-O, Edelbrock 750Carb, Headers, HEI, 2 40" glasspacks. Stereo: Classic-style tape deck/radio, 2 6x9 Cerwin Vega's in doors, 2 10" Neo subs under seats, 1 900 Watt amp. SN= Ares220 __________________ -Greg; Sold the 69 C20. It's off to a better home with more love! Now onto the 86 CUCV M1009; K5 blazer with 6.2L diesel, corp 10 bolt axles, Detroit locker in the rear, trutrac front, 3.73 gears, 35" tires.



Register or Log In To remove these advertisements.

04-23-2002, 01:54 PM	#16
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	Bill72BB, I still have tank in cab.....plan to change out soon. Don't rememberwho it was, but they were under the roof area. I've seen them there again since I bought the belts. As I recall, took some finaglin' on the driver's side to get it to work righ t, been a few years now. See ya there! Bill - Tucson __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

04-23-2002, 04:03 PM	#17
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	see these on Ebay all the time.....tempeted to try them http://cgi.ebay.com/ebaymotors/ws/eb...739467&r=0&t=0 __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas

04-23-2002, 04:08 PM	#18
Frank_Zeller Registered User Join Date: Jun 2001 Location: Austin, Texas Posts: 796	Someone with tan interior these migh work http://cgi.ebay.com/ebaymotors/ws/eb...002081&r=0&t=0 __________________ 69 SWB C/10 5-6 drop 700R4 69 Firebird Convert 455 4 spd 70 Torino GT Convert Austin-Texas

04-23-2002, 05:05 PM	#19
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	Frank thanks Earlier topics indicate the S10 belt will fit if I get the Tan one's and they work will let people know. Bill ------------------ 72 3/4ton Custom Camper BB,400 air,ps,pb,leafsprings tilt,3.54 . 82 chevy silverado sb ,ps,pb pw,pd,air 350/350 Flowmaster 40. Torrance Calif. " If I knew I was going to live this long I would have taken better care of myself " __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

04-23-2002, 06:30 PM	#20
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	They will work, but see my post a few days ago on the subject. The pictures above are the same as S-10 belts. __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

04-25-2002, 12:19 PM	#21
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,519	Try these guys. http://www.julianos.com/retract_3point.html __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

Register or Log In To remove these advertisements.