Would these work on a 69-72 Chevy truck? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70c10 · 03-10-2006, 12:24 AM

These were posted earlier this week and look pretty cool. http://www.nwautofab.com/store/custo...6&cat=3&page=1
Does anybody know if they are made for 69-72 by anybody?. This place doesn't make them.

72armyswbtruck · 03-10-2006, 12:32 AM

Those look pretty cool

shifty · 03-10-2006, 12:38 AM

Some people on the forum have made similar items for their truck. I've seen a few pics. I think I might have em on my work computer.

70c10 · 03-10-2006, 08:14 AM

I would love to have a set in mirrored stainless. They look like they would be easy to make.

70c10 · 03-14-2006, 11:25 PM

ttt

71SWBChevy · 03-14-2006, 11:29 PM

I don't think they will fit the 69-72 since they switched to the more upright hood design.

**Canadian694x4** · 03-14-2006, 11:51 PM

Looks pretty sweet for sumone building a show truck...ttt for ya

junkyardjohn · 03-15-2006, 05:02 AM

I BOUGHT A SET. THEY LOOK PRETTY GOOD. THEY COST ME $80 DELIVERED. I THINK THAT IF SOMEONE HAD ACCESS TO A SHEAR, BAN SAW & SOME KIND OF BREAK TO BEND THE RADIUS, A PERSON COULD MAKE THESE EASY ENOUGH. I'M CONSIDERING POLISHING & POWDERCOATING THEM BLACK, TO KINDA MATCH MY RAD. SUPPORT. I THOUGHT IT MIGHT HELP WITH AIR FLOW THRU THE RADIATOR, WITH THESE CAPPING OFF THE TOP, & AN OEM GRAVEL GUARD ON THE BOTTOM OF THE RAD. SUPPORT. IF NOT ... OH-WELL... IT'LL LOOK COOL.

JOHN

70c10 · 03-15-2006, 07:55 AM

John, which one of your trucks did you buy that for?. I agree that would be easy to make.

junkyardjohn · 03-15-2006, 09:53 AM

Hi Jim... This Is For My 71 Short Fleet 2wd Project. It Has A 68 Front Clip On It. Theres Probably $20 Or $25 Worth Of Aluminum, & The Shipping Was Almost $15. They Charged About $40 Or $45 Labor, So It Doesn't Sound So Bad When You Break It Down. The More I Think About It, Powdercoating Black Seems Like The Way To Go.

John

70c10 · 03-15-2006, 02:31 PM

Thanks John!

03-10-2006, 12:24 AM	#1
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Would these work on a 69-72 Chevy truck? These were posted earlier this week and look pretty cool. http://www.nwautofab.com/store/custo...6&cat=3&page=1 Does anybody know if they are made for 69-72 by anybody?. This place doesn't make them. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

03-10-2006, 12:32 AM	#2
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: Would these work on a 69-72 Chevy truck? Those look pretty cool __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

03-10-2006, 12:38 AM	#3
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: Would these work on a 69-72 Chevy truck? Some people on the forum have made similar items for their truck. I've seen a few pics. I think I might have em on my work computer. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-10-2006, 08:14 AM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Would these work on a 69-72 Chevy truck? I would love to have a set in mirrored stainless. They look like they would be easy to make. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads Last edited by 70c10; 03-10-2006 at 08:14 AM.

03-14-2006, 11:25 PM	#5
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Would these work on a 69-72 Chevy truck? ttt __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

03-14-2006, 11:29 PM	#6
71SWBChevy Post Whore Join Date: Aug 2005 Location: Owensboro KY Posts: 11,905	Re: Would these work on a 69-72 Chevy truck? I don't think they will fit the 69-72 since they switched to the more upright hood design. __________________ Drew '71 Chevy 350/TH350 Hugger Orange Currently just a rolling frame, body work soon to follow!!! Check out my Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=212927 Daily Driver: 1997 Chevrolet S-10 with more gears than pistons

03-14-2006, 11:51 PM	#7
Canadian694x4 Born To Lose Club Join Date: Feb 2003 Location: Calgary, Alberta/Oxenden, Ontario, Great White North Posts: 13,307	Re: Would these work on a 69-72 Chevy truck? Looks pretty sweet for sumone building a show truck...ttt for ya __________________ Brian Smith - "Born To Lose" 1969 Chevrolet K10 LWB Fleetside - Proud Owner For 22 Yrs - 1 of 208 Built & Sold In Canada!- 283 V8/350TH/NP208, 2" All Spring Lift, 32" Good Year MT/R's. 1972 GMC K2500 Custom LWB Fleetside - Proud Owner For 3 Yrs - 1 of 571 Built & Sold In Canada! - 350 V8/SM465/NP205, 4” Rough Country Lift, 33” Interco TSL Thornbirds 2007.5 GMC Sierra SLE 2500HD 4x4 - Proud Owner For 17 Yrs- 6.6L V8 Duramax Diesel/Allison 1000, 2" Lift, 33" Mickey Thompson MTZ's. 2008 Yamaha Raptor 700r - Proud Owner For 15 Yrs - ITP Mud Lites. 2015 John Deere 1025R - Proud Owner For 8 Yrs - 24HP Diesel/H120/54D/260B/SB1154.

03-15-2006, 05:02 AM	#8
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	Re: Would these work on a 69-72 Chevy truck? I BOUGHT A SET. THEY LOOK PRETTY GOOD. THEY COST ME $80 DELIVERED. I THINK THAT IF SOMEONE HAD ACCESS TO A SHEAR, BAN SAW & SOME KIND OF BREAK TO BEND THE RADIUS, A PERSON COULD MAKE THESE EASY ENOUGH. I'M CONSIDERING POLISHING & POWDERCOATING THEM BLACK, TO KINDA MATCH MY RAD. SUPPORT. I THOUGHT IT MIGHT HELP WITH AIR FLOW THRU THE RADIATOR, WITH THESE CAPPING OFF THE TOP, & AN OEM GRAVEL GUARD ON THE BOTTOM OF THE RAD. SUPPORT. IF NOT ... OH-WELL... IT'LL LOOK COOL. JOHN Attached Images __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

03-15-2006, 07:55 AM	#9
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Would these work on a 69-72 Chevy truck? John, which one of your trucks did you buy that for?. I agree that would be easy to make. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

03-15-2006, 09:53 AM	#10
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	Re: Would these work on a 69-72 Chevy truck? Hi Jim... This Is For My 71 Short Fleet 2wd Project. It Has A 68 Front Clip On It. Theres Probably $20 Or $25 Worth Of Aluminum, & The Shipping Was Almost $15. They Charged About $40 Or $45 Labor, So It Doesn't Sound So Bad When You Break It Down. The More I Think About It, Powdercoating Black Seems Like The Way To Go. John __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

03-15-2006, 02:31 PM	#11
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: Would these work on a 69-72 Chevy truck? Thanks John! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.