WTB: Nice drivers door - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gregbr · 03-18-2006, 06:58 AM

What's a nice drivers door for my 70 GMC C10 going for? It needs all the trim holes & standard mirror holes. Mine has a large rust hole in the corner. Shipping to 29730, can Paypal. Greg

DTerry · 03-18-2006, 08:47 AM

Good luck, we've been trying for two months now. The hard part is trying to get somebody to ship

.

72armyswbtruck · 03-18-2006, 11:55 AM

D Terry still no doors? I have spring break in another week, diring this time I can help you out like I promised earlier. That's from 36 March thru 1 April. We can work it all out.
Greg, I can do the same for you there are plenty of good doors around here in the local yard, I would ship thru Grayhound (cheapest and easiest and they like doors). If no one cloose to you has one that is available, I can get it shipped to you around $125 or so, depends on how much I can haggle with the owner at the yard.

72armyswbtruck · 03-18-2006, 11:56 AM

Someone Close To Them Please Help Them Out With Doors.

HuggerCST · 03-18-2006, 01:08 PM

I have a 67-71 driver's door that is straight, with original paint, no speaker hole, but has several extra mirror screw holes, and a few rust bubbles forming at the inner front corner. Other than that 2"x2" area, it's rust free. I can post pics monday if you are interested. $100 delivered to Charlotte in early May.

DTerry · 03-18-2006, 03:42 PM

gregbr, from what I've been finding for the last two months or so, HuggerCST's deal is great. I'd jump on it if I were you.

greenhorn male · 03-18-2006, 04:17 PM

I sold a pair of rust free dent free, original dark green, upper and lower trim, 1972 doors last year for $100. Now I own a dark green and white 1972 GMC with upper and lower trim with rust on the bottom corners of the drivers door. Now I can't find any reasonably priced rust free dent free 72 drivers doors around. Come to think about it I haven't seen any good 72 drivers doors locally.

It is all about timing I guess.

gregbr · 03-18-2006, 04:56 PM

Thanks HuggerCST, this may be picky, but I want rust free. I can repair the hole in mine, otherwise it's OK. Yours sounds a little better, but that rust is probably thru also. Greg

DTerry · 03-18-2006, 07:05 PM

Greg, we were looking for the same thing. But we are running out of time, it's holding up progress at this point. We were hoping to paint by now, and can't because we still need to fit everything together. I'm sure you'll find what your looking for, it's like greenhorn said - timing (WOW, a pair for $100!!! - you're a very nice guy)

Speaking of timing, and don't mean to hijack, but... HuggerCST, will you ship? If so, will you post the pics?

03-18-2006, 06:58 AM	#1
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	WTB: Nice drivers door What's a nice drivers door for my 70 GMC C10 going for? It needs all the trim holes & standard mirror holes. Mine has a large rust hole in the corner. Shipping to 29730, can Paypal. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

03-18-2006, 08:47 AM	#2
DTerry '70 GMC C-25 LWB Join Date: Oct 2004 Location: Binghamton, N.Y. Posts: 273	Re: WTB: Nice drivers door Good luck, we've been trying for two months now. The hard part is trying to get somebody to ship . __________________ 1970 GMC C-25 LWB (middle of frame up) 5-7 drop with 3in drop spindles, flip kit with blocks and still keeping the 3/4 ton. Shaved drip rails and marker lights, rear roll pan, cowl induction hood. 1987 Camaro z28 350, vortec 305 heads. 10:1 comp, t5 trans. Street terrrorizer. 1988 Monte Carlo (Super Stock ashpalt race car) My Truck

03-18-2006, 11:55 AM	#3
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: WTB: Nice drivers door D Terry still no doors? I have spring break in another week, diring this time I can help you out like I promised earlier. That's from 36 March thru 1 April. We can work it all out. Greg, I can do the same for you there are plenty of good doors around here in the local yard, I would ship thru Grayhound (cheapest and easiest and they like doors). If no one cloose to you has one that is available, I can get it shipped to you around $125 or so, depends on how much I can haggle with the owner at the yard. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

03-18-2006, 11:56 AM	#4
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: WTB: Nice drivers door Someone Close To Them Please Help Them Out With Doors. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

03-18-2006, 01:08 PM	#5
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: WTB: Nice drivers door I have a 67-71 driver's door that is straight, with original paint, no speaker hole, but has several extra mirror screw holes, and a few rust bubbles forming at the inner front corner. Other than that 2"x2" area, it's rust free. I can post pics monday if you are interested. $100 delivered to Charlotte in early May. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

03-18-2006, 03:42 PM	#6
DTerry '70 GMC C-25 LWB Join Date: Oct 2004 Location: Binghamton, N.Y. Posts: 273	Re: WTB: Nice drivers door gregbr, from what I've been finding for the last two months or so, HuggerCST's deal is great. I'd jump on it if I were you. __________________ 1970 GMC C-25 LWB (middle of frame up) 5-7 drop with 3in drop spindles, flip kit with blocks and still keeping the 3/4 ton. Shaved drip rails and marker lights, rear roll pan, cowl induction hood. 1987 Camaro z28 350, vortec 305 heads. 10:1 comp, t5 trans. Street terrrorizer. 1988 Monte Carlo (Super Stock ashpalt race car) My Truck

03-18-2006, 04:17 PM	#7
greenhorn male Senior Member Join Date: Jan 2003 Location: Bay Area, Northern California Posts: 1,344	Re: WTB: Nice drivers door I sold a pair of rust free dent free, original dark green, upper and lower trim, 1972 doors last year for $100. Now I own a dark green and white 1972 GMC with upper and lower trim with rust on the bottom corners of the drivers door. Now I can't find any reasonably priced rust free dent free 72 drivers doors around. Come to think about it I haven't seen any good 72 drivers doors locally. It is all about timing I guess. __________________ 03 Tahoe 72 GMC Super Custom 2500 Custom Camper, my reliable workhorse. Dual gauged tanks, dual battery trays.

03-18-2006, 04:56 PM	#8
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: WTB: Nice drivers door Thanks HuggerCST, this may be picky, but I want rust free. I can repair the hole in mine, otherwise it's OK. Yours sounds a little better, but that rust is probably thru also. Greg __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

03-18-2006, 07:05 PM	#9
DTerry '70 GMC C-25 LWB Join Date: Oct 2004 Location: Binghamton, N.Y. Posts: 273	Re: WTB: Nice drivers door Greg, we were looking for the same thing. But we are running out of time, it's holding up progress at this point. We were hoping to paint by now, and can't because we still need to fit everything together. I'm sure you'll find what your looking for, it's like greenhorn said - timing (WOW, a pair for $100!!! - you're a very nice guy) Speaking of timing, and don't mean to hijack, but... HuggerCST, will you ship? If so, will you post the pics? __________________ 1970 GMC C-25 LWB (middle of frame up) 5-7 drop with 3in drop spindles, flip kit with blocks and still keeping the 3/4 ton. Shaved drip rails and marker lights, rear roll pan, cowl induction hood. 1987 Camaro z28 350, vortec 305 heads. 10:1 comp, t5 trans. Street terrrorizer. 1988 Monte Carlo (Super Stock ashpalt race car) My Truck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.