Heads question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Solver · 03-21-2006, 10:27 AM

Will #882 heads from a 1975 have the right front bolt holes for a 72 application as far as the alternator mounting
Anything else that might cause me problems?

crazy longhorn · 03-21-2006, 10:37 AM

Yup, you are good to go

The only problems I can see , are using the large chamber heads on a 305 or 307(lower compresssion).....on a 327 or 350, should be no problem.

L

03-21-2006, 10:27 AM	#1
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	Heads question Will #882 heads from a 1975 have the right front bolt holes for a 72 application as far as the alternator mounting Anything else that might cause me problems? __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon Last edited by Solver; 03-21-2006 at 10:27 AM.

03-21-2006, 10:37 AM	#2
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,402	Re: Heads question Yup, you are good to go The only problems I can see , are using the large chamber heads on a 305 or 307(lower compresssion).....on a 327 or 350, should be no problem. L __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.