how to get the build sheet?????? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

davidh · 02-15-2006, 08:40 PM

Yeah, I called the phone number today and got nothing. It didn't ring or anything, never connected. It was nice to think we could be lead to getting specific information but it's seems doubtful again. But I'm sure now they do it with all the new vehicles. Too bad they are all generic with options all or nothing on 3 levels of packaging. std sport and luxury. How hard would that be to decode?
No ones ordering specific things anymore. They come in packages nothin like the equivalent of a speical orderd 69' 4door impala stript down with a 427-4speed.

Andy4639 · 02-15-2006, 10:00 PM

Ok, I stayed on the phone much of the day tring to get ahold of some one about all this at Gm Heritage Center with no luck. I called the 586-276-0695 with nothing. I called the 1-800-222-1020 about the Registration Packet nothing. Finally I looked on the net and found a number that she asked me not to print, so I'm not. But I got a phone mail answer they are closed until March 1st. I left them a message to call me back she said they where good about that so I will post if I hear back from them. Sorry that's all I could find out.

Andy4639 · 02-15-2006, 10:23 PM

Ok beleive it or not I just got my Registration packet ordered. He said it would take about 2 weeks. 1-800-222-1020 ext.# 4.
Now he gave me 2 new numbers to reach the GM Heritage Center
586-276-0693 or 0691. I just called the 0693 # and got a email address. The guy is out of the office until Feburary 28 it say's.
William.vanluven@gm.com. The 0691 was a generic answering machine asking for a name. Hope this helps everyone. I am going to send him a e-mail right now.

Andy4639 · 02-26-2006, 10:39 AM

I got my registration packet this past Friday in the mail. Man that thing is full of info on theses trucks. Now I'm going to keep working on the build sheet.

davidh · 02-26-2006, 12:58 PM

so, was it not specific to your truck? Just a list of what options "were available" for that year? Or is it specific to your truck?

Andy4639 · 02-27-2006, 09:04 AM

Nonspecific to my truck but has some good info on all the models for that year.Got to wait a few more days to get anything done on the build sheet. Waiting for a reply to my e-mail.

deth_1970 · 03-24-2006, 06:42 AM

Due to the unexpected turns life takes, I have yet to send off for this info, but will be doing so in about 2 weeks,

davidh · 03-24-2006, 12:10 PM

I sent off on that address and got a reply back. They only deal with caddilace and oldsmobile. They couldn't do anything for me.

02-15-2006, 08:40 PM	#26
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	Re: how to get the build sheet?????? Yeah, I called the phone number today and got nothing. It didn't ring or anything, never connected. It was nice to think we could be lead to getting specific information but it's seems doubtful again. But I'm sure now they do it with all the new vehicles. Too bad they are all generic with options all or nothing on 3 levels of packaging. std sport and luxury. How hard would that be to decode? No ones ordering specific things anymore. They come in packages nothin like the equivalent of a speical orderd 69' 4door impala stript down with a 427-4speed.

02-15-2006, 10:00 PM	#27
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: how to get the build sheet?????? Ok, I stayed on the phone much of the day tring to get ahold of some one about all this at Gm Heritage Center with no luck. I called the 586-276-0695 with nothing. I called the 1-800-222-1020 about the Registration Packet nothing. Finally I looked on the net and found a number that she asked me not to print, so I'm not. But I got a phone mail answer they are closed until March 1st. I left them a message to call me back she said they where good about that so I will post if I hear back from them. Sorry that's all I could find out. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-15-2006, 10:23 PM	#28
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: how to get the build sheet?????? Ok beleive it or not I just got my Registration packet ordered. He said it would take about 2 weeks. 1-800-222-1020 ext.# 4. Now he gave me 2 new numbers to reach the GM Heritage Center 586-276-0693 or 0691. I just called the 0693 # and got a email address. The guy is out of the office until Feburary 28 it say's. William.vanluven@gm.com. The 0691 was a generic answering machine asking for a name. Hope this helps everyone. I am going to send him a e-mail right now. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-26-2006, 10:39 AM	#29
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: how to get the build sheet?????? I got my registration packet this past Friday in the mail. Man that thing is full of info on theses trucks. Now I'm going to keep working on the build sheet. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-26-2006, 12:58 PM	#30
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	Re: how to get the build sheet?????? so, was it not specific to your truck? Just a list of what options "were available" for that year? Or is it specific to your truck?

02-27-2006, 09:04 AM	#31
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: how to get the build sheet?????? Nonspecific to my truck but has some good info on all the models for that year.Got to wait a few more days to get anything done on the build sheet. Waiting for a reply to my e-mail. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

03-24-2006, 06:42 AM	#32
deth_1970 Registered User Join Date: Jul 2004 Location: Braggs, okla Posts: 161	Re: how to get the build sheet?????? Due to the unexpected turns life takes, I have yet to send off for this info, but will be doing so in about 2 weeks, __________________ 78 dualy crew cab wife calls "the beast" 79 silverado "yeller" 99 tahoe 02 Gmc sierra

03-24-2006, 12:10 PM	#33
davidh Senior Member Join Date: Feb 2004 Location: Ponca city now kingfisher Oklahoma Posts: 1,221	Re: how to get the build sheet?????? I sent off on that address and got a reply back. They only deal with caddilace and oldsmobile. They couldn't do anything for me.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.