Transmission Cooler Installed! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

iamthor · 03-29-2006, 12:20 AM

Here it is. 3/4 Aluminum Tube. I used the factory holes with the welded on nuts (what are those for anyways???). I drilled the Bottom tube and made a "?" shaped brackets on the top since it sat 1 inch higher than the factory hole. Since I am not running a fan on the cooler I was able to leave the X bars in place. The cooler has about 1-inch clearance in front and back. Sounds like I did the same thing as Derail.

derail · 03-29-2006, 03:02 AM

Very nice! That was exactly what I was talking about and looks almost the exact same as mine. I guess "Great minds think alike."

03-29-2006, 12:20 AM	#1
iamthor Registered User Join Date: Nov 2005 Location: San Jose, CA Posts: 54	Transmission Cooler Installed! Here it is. 3/4 Aluminum Tube. I used the factory holes with the welded on nuts (what are those for anyways???). I drilled the Bottom tube and made a "?" shaped brackets on the top since it sat 1 inch higher than the factory hole. Since I am not running a fan on the cooler I was able to leave the X bars in place. The cooler has about 1-inch clearance in front and back. Sounds like I did the same thing as Derail. Attached Images __________________ Rollin in my 64....GMC Suburban

03-29-2006, 03:02 AM	#2
derail Registered User Join Date: Sep 2005 Location: redding,ca. Posts: 182	Re: Transmission Cooler Installed! Very nice! That was exactly what I was talking about and looks almost the exact same as mine. I guess "Great minds think alike."



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.