WTB: Heater control delete - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shifty · 03-27-2006, 11:43 AM

I removed all of the ductwork on the inside of the firewall this weekend to scrap, sell or trade. I need a delete panel for the hole that is there for now. Eventually I might craft up a bracket to hold some gauges there, but until that time comes, I want to cover the hole.

Anyone got one FS?

shifty · 03-27-2006, 06:25 PM

anyone?

72armyswbtruck · 03-27-2006, 06:54 PM

I have never seen one, wonder what a factory one looked like?

Burnsman · 03-27-2006, 06:59 PM

I have 2 (not for sale), but I'll try to get a pic. Brian

**BIG ORANGE** · 03-27-2006, 07:16 PM

Hey Burnsman how about posting a pic. of them for us!

Burnsman · 03-27-2006, 08:42 PM

Here they are. I laid them next to a radio delete for comparison. The mounting tabs are different and they are slightly different in size. I had the firewall block-off plate at one time. I've never had any defroster blanks, but I've heard that they exist. Brian

Bob Moore · 03-27-2006, 11:13 PM

Looks like mounting tabs istead of clips. Also appears the corners have a larger radius. What a cool part to have. The 1st 67 I owned had only 1 sunvisor - the passenger side had never been cut. I don't know why I mentioned this but deletes always make me think about that. Several years later I found a visor delete in a van. It was a molded plastic triangular plug that fit in the center hole and had 3 small bumps to fit the 3 screw holes. It even had a GM part number molded on the back side.

Deuce · 03-28-2006, 01:18 AM

I'm going to mount a CD player where the heater controls were and install a radio delete plate so I don't have to cut the dash.

shifty · 03-31-2006, 12:03 PM

Still lookin!

03-27-2006, 11:43 AM	#1
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	WTB: Heater control delete I removed all of the ductwork on the inside of the firewall this weekend to scrap, sell or trade. I need a delete panel for the hole that is there for now. Eventually I might craft up a bracket to hold some gauges there, but until that time comes, I want to cover the hole. Anyone got one FS? __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-27-2006, 06:25 PM	#2
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: WTB: Heater control delete anyone? __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

03-27-2006, 06:54 PM	#3
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: WTB: Heater control delete I have never seen one, wonder what a factory one looked like? __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!" Last edited by 72armyswbtruck; 03-27-2006 at 06:54 PM.

03-27-2006, 06:59 PM	#4
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: WTB: Heater control delete I have 2 (not for sale), but I'll try to get a pic. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

03-27-2006, 07:16 PM	#5
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,752	Re: WTB: Heater control delete Hey Burnsman how about posting a pic. of them for us! __________________ Things happen for a reason!

03-27-2006, 08:42 PM	#6
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: WTB: Heater control delete Here they are. I laid them next to a radio delete for comparison. The mounting tabs are different and they are slightly different in size. I had the firewall block-off plate at one time. I've never had any defroster blanks, but I've heard that they exist. Brian Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

03-27-2006, 11:13 PM	#7
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: WTB: Heater control delete Looks like mounting tabs istead of clips. Also appears the corners have a larger radius. What a cool part to have. The 1st 67 I owned had only 1 sunvisor - the passenger side had never been cut. I don't know why I mentioned this but deletes always make me think about that. Several years later I found a visor delete in a van. It was a molded plastic triangular plug that fit in the center hole and had 3 small bumps to fit the 3 screw holes. It even had a GM part number molded on the back side. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

03-28-2006, 01:18 AM	#8
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Re: WTB: Heater control delete I'm going to mount a CD player where the heater controls were and install a radio delete plate so I don't have to cut the dash. __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

03-31-2006, 12:03 PM	#9
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: WTB: Heater control delete Still lookin! __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.