67 SWB with must II front & 4 link rear. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67'ShortMonster · 04-03-2006, 11:02 AM

We finsihed building my M2 crossmemeber. When we did mine we did look at anti-dive ect. For the most part, if your front crossmember has adjustable mounting points on the arms.... like most do... you can tweek it to get all your parameters right.
just make sure your top arm has a 4 deg or so angle to it compared to the flat bottom one.
My biggest concern is the weight.... i am going with a big block, and i am skeptical about the M2 spindle size.

04-03-2006, 11:02 AM	#1
67'ShortMonster Registered User Join Date: Aug 2002 Location: Salmon Arm, B.C. Canda Posts: 73	Re: 67 SWB with must II front & 4 link rear. We finsihed building my M2 crossmemeber. When we did mine we did look at anti-dive ect. For the most part, if your front crossmember has adjustable mounting points on the arms.... like most do... you can tweek it to get all your parameters right. just make sure your top arm has a 4 deg or so angle to it compared to the flat bottom one. My biggest concern is the weight.... i am going with a big block, and i am skeptical about the M2 spindle size.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.