0-90 ohm sending unit for stack gas tank? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

62ChevyStep · 04-11-2006, 02:17 PM

Just purchased my VDO Gauges and the gas gauge requires a 0-90 ohm sending unit. the OEM was 0-30 ohms. I still have the stock tank behind my seat (though it is new) does anyone make a drop in 0-90 ohm unit for the stock tank? GM changed to 0-90 ohms in 68, I think? will one from a 68 work in a 60-66 style tank? they were still behind the seat, is the bolt pattern the same?

troy destroy · 04-11-2006, 04:42 PM

i think your best bet would be purchasing the correct gauge. try contacting your vendor, they probably have the correct gauge and will swap them out for the shipping cost. good luck

04-11-2006, 02:17 PM	#1
62ChevyStep Senior Member Join Date: May 2005 Location: Portales, NM Posts: 359	0-90 ohm sending unit for stack gas tank? Just purchased my VDO Gauges and the gas gauge requires a 0-90 ohm sending unit. the OEM was 0-30 ohms. I still have the stock tank behind my seat (though it is new) does anyone make a drop in 0-90 ohm unit for the stock tank? GM changed to 0-90 ohms in 68, I think? will one from a 68 work in a 60-66 style tank? they were still behind the seat, is the bolt pattern the same? __________________ ________________________ 62' 3.5/5 drop SWB Fleet, PS, PB-Dsk/Drm,350/700R4 08' Chevrolet Silverado CrewCab 05'Toyota Tacoma Prerunner SR5

04-11-2006, 04:42 PM	#2
troy destroy Registered User Join Date: Apr 2006 Location: Dallas, Tx Posts: 49	Re: 0-90 ohm sending unit for stack gas tank? i think your best bet would be purchasing the correct gauge. try contacting your vendor, they probably have the correct gauge and will swap them out for the shipping cost. good luck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.