Lowered my 67'

[randomhero472]

finaly got the trucks lowered, i used all classic performer parts, thought i would do a mini write up with my experience w/them. They had the best price for a complete kit i found by about 100 bux, i ordered the kit, but was quoted 2 different prices on the phone.. and ended up having to pay the higher price ($30 dollars higher). One thing that annoyed me from the get go were the salesman on the phone, they acted like i shouldnt be calling and asking any questions, and sounds annoyed to answer anything i asked, one of the two people i talked to was pleasent, but the other was a plain dick. I was told the parts would be here in 10 buisness days, showed up in 7, so A+ there.. however they didnt include one piece of the "included" hardware.. none of the nuts/bolts/washers that come with the shock re-locate kit came, which made me quite angry because i live about 45 minutes away from a parts store.. besides that everything went super smooth, the truck rides 1000x better than it did on the tired springs, didnt get much drop out of the rear (4" srping gave me a little over 2") but the coils were so worn the middle three were smashed together, also the truck ended up about 1.3" higher on the drivers side, im not sure if the spring in the front havent seated yet or what.. all in all i was pleased, but would/will probably go anothe route in the future for parts, between missing hardware and the shotty salesman i wasnt to impressed, but the quality of parts was great, here's a pic.. now all it needs is some paint and 20" wheels and i'll be set, thanks

[67Fleet]

Sweet, a suspension drop always makes a huge improvement IMO.

[Tx Firefighter]

Well, I see where Matt's old truck went now. I did the welding on that truck.

Please, please, please, call ECE on the phone and give those guys a chance next time. If there is a single nut, bolt, or washer missing, I guarantee you they will next day air it to you without cost or complaint. Customer service from ECE is simply second to none.

[randomhero472]

i will do that for sure.. matt mentioned you when i went to dallas to pick it up, im really enjoying the truck.. i just bought a mig welder, im going to get all the holes for moldings filled and a few other spots touched up, then have a body guy fix the doors (rust on bottom) and cab corners, i'll do the rockers myself i think... i'm shooting to have it all in primer w/in a month-two, i'll definatly give ece a buzz next time i need something

[SCOTI]

I knew I recognized that truck from somewhere!

I got a short ride in it this spring @ the local DFW guys meet & greet. Matt's a great guy too so you know that truck is solid.

[Joe67]

I love that truck just how it sits

I agree on ECE - their customer service is second to none

[Zumo]

Yes Matt is a top notch guy and that is an awesome truck.

[FRENCHBLUE72]

That truck is very good looking just the way it is...

[randomhero472]

thanks for the compliments.. im thinking of adding an a/c, 95 degree's in oklahoma today, no a/c sucks!!