what can you expect - The 1947 - Present Chevrolet & GMC Truck Message Board Network

diver547 · 04-16-2006, 04:13 PM

what can someone expect to spend on a good rust free cab,doors for 67-72.
I have located a few with prices anywhere from 500 that needs some work to 1500 that is very good with doors.

1969k10stepside · 04-16-2006, 04:14 PM

just depends on condition and the seller.400?

PanelDeland · 04-16-2006, 04:39 PM

You also need to look at geography.In the south and southwest rust free cabs are easier to find.If you are looking for one in Ohio you are probably find fewer than looking in Arizona.The price will reflect the availability.

Longhorn Man · 04-16-2006, 04:42 PM

what part of ohio you in?

diver547 · 04-16-2006, 04:45 PM

im just north of Columbus in Mansfield

1969k10stepside · 04-16-2006, 04:47 PM

I agree with PanelDeland,Geography counts, doors probably run 250-500.Look on ebay,here ,and sites that buy from the south.I will get a link of one and post it later.Or you can by reproduction doors and repair panels for what you have.

1969k10stepside · 04-16-2006, 04:49 PM

Link to a site that buys from south east and west,kind of expensive.
http://www.mtsalvage.com

diver547 · 04-16-2006, 04:52 PM

I have talked with mike at mtsalvage.....he has the orange cab and doors that i have thought about.....he is supposed to be sending me more photos of it.....this is by far the nicest cab i have found
he said 1800 delivered to me for just the cab and doors no frame.

*72CSTC5* · 04-16-2006, 06:34 PM

Buy the best that you could afford. It will save you immensely in the long run for bodywork and time.

**FRENCHBLUE72** · 04-16-2006, 09:00 PM

I got a free one in oregon come and get it..

Karl Hoh · 04-16-2006, 11:02 PM

I just picked up a rust free cab with doors, original AZ, from sakohntr in MN. Paid $800. Needs a little minor bodywork and doors had speaker holes in them, didn't care. You can't find rust free anything around here unless its new. I thought it was a great deal. I priced out all the repair panels I needed, $300. Nobody would do the work for $500.!

04-16-2006, 04:13 PM	#1
diver547 Registered User Join Date: Apr 2006 Location: ohio Posts: 11	what can you expect what can someone expect to spend on a good rust free cab,doors for 67-72. I have located a few with prices anywhere from 500 that needs some work to 1500 that is very good with doors.

04-16-2006, 04:14 PM	#2
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: what can you expect just depends on condition and the seller.400?

04-16-2006, 04:39 PM	#3
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,993	Re: what can you expect You also need to look at geography.In the south and southwest rust free cabs are easier to find.If you are looking for one in Ohio you are probably find fewer than looking in Arizona.The price will reflect the availability. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

04-16-2006, 04:42 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: what can you expect what part of ohio you in?

04-16-2006, 04:45 PM	#5
diver547 Registered User Join Date: Apr 2006 Location: ohio Posts: 11	Re: what can you expect im just north of Columbus in Mansfield

04-16-2006, 04:47 PM	#6
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: what can you expect I agree with PanelDeland,Geography counts, doors probably run 250-500.Look on ebay,here ,and sites that buy from the south.I will get a link of one and post it later.Or you can by reproduction doors and repair panels for what you have.

04-16-2006, 04:49 PM	#7
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,020	Re: what can you expect Link to a site that buys from south east and west,kind of expensive. http://www.mtsalvage.com

04-16-2006, 04:52 PM	#8
diver547 Registered User Join Date: Apr 2006 Location: ohio Posts: 11	Re: what can you expect I have talked with mike at mtsalvage.....he has the orange cab and doors that i have thought about.....he is supposed to be sending me more photos of it.....this is by far the nicest cab i have found he said 1800 delivered to me for just the cab and doors no frame.

04-16-2006, 06:34 PM	#9
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,524	Re: what can you expect Buy the best that you could afford. It will save you immensely in the long run for bodywork and time.

04-16-2006, 09:00 PM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	Re: what can you expect I got a free one in oregon come and get it.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-16-2006, 11:02 PM	#11
Karl Hoh A little east of nowhere Join Date: Feb 2006 Location: LaBroquerie,Manitoba Canada Posts: 168	Re: what can you expect I just picked up a rust free cab with doors, original AZ, from sakohntr in MN. Paid $800. Needs a little minor bodywork and doors had speaker holes in them, didn't care. You can't find rust free anything around here unless its new. I thought it was a great deal. I priced out all the repair panels I needed, $300. Nobody would do the work for $500.! __________________ 68 C10 250 4spd 69 C20 327 4spd 69 910 250 3spd 80 K10 350 4spd 76 C60 366 5spd school bus "THERE'S NOTHING YOU CAN BREAK THAT SOMEONE CAN'T BE PAID TO REPAIR"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.