anyone used late modle wipers/squirters/motor assembly in their truck? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shifty · 04-16-2006, 12:54 AM

just curious - was just talking in chat about the possibility of using this setup on my truck - i hate the current setup with the pump inside the truck, doesn't work anyway, so i really am wanting to go to the JY and try to find the pump and resevoir for water, then use a later model 99+ truck wipers setup (with integrated squirters) and try to figure out the switch and linkage.

just curious - i asked a similar question before, but looking for specific info this time.

72 CustomCamper · 04-16-2006, 02:06 AM

Hey shifty, I have a pump and resevoir from an 86 K5 blazer in my 72 and it works great...

Chuck

shifty · 04-16-2006, 02:09 AM

you using the wipers and squirters also? if yes, can you provide some details on the install and maybe a pic or two?

72 CustomCamper · 04-16-2006, 02:15 AM

Still have the 72 wipers and squirters. The old pump took a dump years ago and I had the resevoir laying around after we scrapped the 86.I like the 86 resevoir because the pump is made onto it...

shifty · 04-17-2006, 03:53 PM

yeah, that's what i hear. i am going with the same setup, i think you can buy the resevoir and pump new for $50 or so. i'm going to look into that so I can at least get the current pump out from under the dash (unless it's integrated with the wiper motor?). makes more sense to have the resevoir and pump in the same place, not the pump and wiper motor..

TugOwar · 04-17-2006, 05:06 PM

I'm interested in this as well, mostly the late model wiper motor. My factory motor is toast and if/when I get her back on the raod I may at some point need wipers that work. That is if it ever rains again.

qksilver · 04-17-2006, 08:45 PM

I am stripping and 87 and it has the wiper arm squirters. I did some measuring and it looks like it will all work........so it's going on my 67, the wiper arm assm, motor and linkage

TugOwar · 04-17-2006, 08:53 PM

Quote:

Originally Posted by qksilver

I am stripping and 87 and it has the wiper arm squirters. I did some measuring and it looks like it will all work........so it's going on my 67, the wiper arm assm, motor and linkage

This is good info sir. Thanks for sharing.

shifty · 04-18-2006, 12:22 PM

when you expect to get this done?

cstanley · 04-18-2006, 01:18 PM

shifty, the motor and pump are integrated into one unit that's a bear to get to. might be best to clip the wires that activate the pump bypassing it to the new pump. i'd also be curious about the pump swap. mine isn't that old, but it sux.

shifty · 04-18-2006, 01:34 PM

hmmm, figures, nothing is easy

i guess what i really need to do is hit the local junkyard at this point, eh?

5150 · 04-18-2006, 07:48 PM

shifty,

Do what I did and get the S10 pump and wire it up to your existing wiper switch. If you want more info I can get it to you. Putter was the one who helped me with it. It shoots across the garage!!

04-16-2006, 12:54 AM	#1
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	anyone used late modle wipers/squirters/motor assembly in their truck? just curious - was just talking in chat about the possibility of using this setup on my truck - i hate the current setup with the pump inside the truck, doesn't work anyway, so i really am wanting to go to the JY and try to find the pump and resevoir for water, then use a later model 99+ truck wipers setup (with integrated squirters) and try to figure out the switch and linkage. just curious - i asked a similar question before, but looking for specific info this time. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

04-16-2006, 02:06 AM	#2
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	Re: anyone used late modle wipers/squirters/motor assembly in their truck? Hey shifty, I have a pump and resevoir from an 86 K5 blazer in my 72 and it works great... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

04-16-2006, 02:09 AM	#3
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: anyone used late modle wipers/squirters/motor assembly in their truck? you using the wipers and squirters also? if yes, can you provide some details on the install and maybe a pic or two? __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

04-16-2006, 02:15 AM	#4
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	Re: anyone used late modle wipers/squirters/motor assembly in their truck? Still have the 72 wipers and squirters. The old pump took a dump years ago and I had the resevoir laying around after we scrapped the 86.I like the 86 resevoir because the pump is made onto it... __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

04-17-2006, 03:53 PM	#5
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: anyone used late modle wipers/squirters/motor assembly in their truck? yeah, that's what i hear. i am going with the same setup, i think you can buy the resevoir and pump new for $50 or so. i'm going to look into that so I can at least get the current pump out from under the dash (unless it's integrated with the wiper motor?). makes more sense to have the resevoir and pump in the same place, not the pump and wiper motor.. __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. Last edited by shifty; 04-17-2006 at 03:53 PM.

04-17-2006, 05:06 PM	#6
TugOwar Registered User Join Date: Sep 2004 Location: Pleasanton, TX Posts: 1,723	Re: anyone used late modle wipers/squirters/motor assembly in their truck? I'm interested in this as well, mostly the late model wiper motor. My factory motor is toast and if/when I get her back on the raod I may at some point need wipers that work. That is if it ever rains again.

04-17-2006, 08:45 PM	#7
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: anyone used late modle wipers/squirters/motor assembly in their truck? I am stripping and 87 and it has the wiper arm squirters. I did some measuring and it looks like it will all work........so it's going on my 67, the wiper arm assm, motor and linkage

04-18-2006, 12:22 PM	#9
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: anyone used late modle wipers/squirters/motor assembly in their truck? when you expect to get this done? __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

04-18-2006, 01:18 PM	#10
cstanley Senior Member Join Date: Oct 2005 Location: Austin, TX Posts: 1,229	Re: anyone used late modle wipers/squirters/motor assembly in their truck? shifty, the motor and pump are integrated into one unit that's a bear to get to. might be best to clip the wires that activate the pump bypassing it to the new pump. i'd also be curious about the pump swap. mine isn't that old, but it sux. __________________ "Anybody who would paint his truck like this, would go to a minister's funeral dressed in feathers!" - Big Enis Burdett '72 Blazer Restoration Blog: http://sportchicken.blogspot.com/

04-18-2006, 01:34 PM	#11
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,373	Re: anyone used late modle wipers/squirters/motor assembly in their truck? hmmm, figures, nothing is easy i guess what i really need to do is hit the local junkyard at this point, eh? __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

04-18-2006, 07:48 PM	#12
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: anyone used late modle wipers/squirters/motor assembly in their truck? shifty, Do what I did and get the S10 pump and wire it up to your existing wiper switch. If you want more info I can get it to you. Putter was the one who helped me with it. It shoots across the garage!! __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.