Fleetside/Wideside Tailgate Handles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Bob B.** · 04-22-2006, 11:17 PM

O.K., experts, fill me in. I bought a '67-'72 repro. handle, and it appears to be a copy of the '81-'87 C/K tailgate handle. I have a new G.M. handle, part #15569031, which is a '81-'87 handle. It looks like it would fit just fine (as does the repro.), the mounting holes are in the same place, as is the holes for the latch rods, ect.. But, the thing is my original handle has a larger grip on it. So, the questions are does anyone offer a 'correct' '67-'72 handle, and does a '81-'87 handle look O.K. on a '67-'72?

04-22-2006, 11:17 PM	#1
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,363	Fleetside/Wideside Tailgate Handles O.K., experts, fill me in. I bought a '67-'72 repro. handle, and it appears to be a copy of the '81-'87 C/K tailgate handle. I have a new G.M. handle, part #15569031, which is a '81-'87 handle. It looks like it would fit just fine (as does the repro.), the mounting holes are in the same place, as is the holes for the latch rods, ect.. But, the thing is my original handle has a larger grip on it. So, the questions are does anyone offer a 'correct' '67-'72 handle, and does a '81-'87 handle look O.K. on a '67-'72? __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90. Last edited by Bob B.; 04-22-2006 at 11:18 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.