Rear bed panel/channel...fix help please! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Huck · 04-24-2006, 08:22 AM

Bed floor metal is pretty heavy but rusts out where it wraps over the rear floor support. This area traps dirt and moisture so that even "rust free" trucks/blazers from California etc. rust out here. If this is the channel you are referring to, it is available from several vendors for around $100. which would be well worth that as it also has the floor mounts on it. Post some pictures of what you are dealing with.

04-24-2006, 08:22 AM	#1
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,269	Re: Rear bed panel/channel...fix help please! Bed floor metal is pretty heavy but rusts out where it wraps over the rear floor support. This area traps dirt and moisture so that even "rust free" trucks/blazers from California etc. rust out here. If this is the channel you are referring to, it is available from several vendors for around $100. which would be well worth that as it also has the floor mounts on it. Post some pictures of what you are dealing with.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.