what cruise control unit will work?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MONGO1957 · 04-09-2006, 12:43 PM

Hi Everyone,
I'm Rebuildind A 1970 C-10 Fleetside And Was Wondering If There Are Any Suitable Substitutions For The Factory Original Cruise Control. The Original Units Are Quite Hard To Find And A Bit Pricey.
I'm Sure Somebody Out There Has Found A Good Substition Maybe Aftermaket? Maybe Gm Passenger Car?
If Anyone Has Any Ideas----i'm All Ears

Thanks ,mongo1957

**pjmoreland** · 04-09-2006, 04:10 PM

This is how I did it:

http://67-72chevytrucks.com/vboard/s...d.php?t=151318

GMC Jim · 04-09-2006, 04:40 PM

I would check with Rostra Precision Controls. They used to make ( maybe still do!); cruise controls for our trucks, including the modified turn signal lever that matches the factory control of that type.

jscurtiss · 04-27-2006, 02:46 PM

does anyone have any experience with the Dakota Digital Cruise Control addon unit?
I was looking at it, but would like to hear from someone if it's worth the cost.

fade94 · 04-27-2006, 04:00 PM

I'm going to be using the cruise off of the 81 van that I got the tilt column off of. Runs on vacuum and an extra speedo cable.

Blue85 · 04-27-2006, 10:38 PM

I looked into the dakota cruise a little bit , seems a bit pricey, i might just go to the junkyard and make something work.

04-09-2006, 12:43 PM	#1
MONGO1957 Junior Member Join Date: Feb 2004 Location: WORTHINGTON,OHIO 43085 Posts: 26	what cruise control unit will work?? Hi Everyone, I'm Rebuildind A 1970 C-10 Fleetside And Was Wondering If There Are Any Suitable Substitutions For The Factory Original Cruise Control. The Original Units Are Quite Hard To Find And A Bit Pricey. I'm Sure Somebody Out There Has Found A Good Substition Maybe Aftermaket? Maybe Gm Passenger Car? If Anyone Has Any Ideas----i'm All Ears Thanks ,mongo1957

04-09-2006, 04:10 PM	#2
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,430	Re: what cruise control unit will work?? This is how I did it: http://67-72chevytrucks.com/vboard/s...d.php?t=151318

04-09-2006, 04:40 PM	#3
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	Re: what cruise control unit will work?? I would check with Rostra Precision Controls. They used to make ( maybe still do!); cruise controls for our trucks, including the modified turn signal lever that matches the factory control of that type. __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).

04-27-2006, 02:46 PM	#4
jscurtiss Registered User Join Date: Jan 2006 Location: NE Posts: 10	Re: what cruise control unit will work?? does anyone have any experience with the Dakota Digital Cruise Control addon unit? I was looking at it, but would like to hear from someone if it's worth the cost.

04-27-2006, 04:00 PM	#5
fade94 Registered User Join Date: Mar 2005 Location: Melissa, TX Posts: 799	Re: what cruise control unit will work?? I'm going to be using the cruise off of the 81 van that I got the tilt column off of. Runs on vacuum and an extra speedo cable. __________________ 68 short bed driver (71 clip on it now, swapping to 68 when weather cooperates) 67 short step project (will get SWB from the 68) 67 Camaro, #'s matching (my wife's) 03 Dodge Ram 2500 4x4 diesel 5 speed 4.10 rear

04-27-2006, 10:38 PM	#6
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Re: what cruise control unit will work?? I looked into the dakota cruise a little bit , seems a bit pricey, i might just go to the junkyard and make something work. __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.