|
04-27-2006, 05:51 PM
|
#1 |
|
Registered User
Join Date: Apr 2006
Location: Throwin sparks down I -44
Posts: 49
|
Question
Im a firm believer in the search tool but I am having trouble finding what I need.
I am looking to see what kind of Hubs, Spindles etc etc guys are using as an update or just because its better?
__________________
http://www.adicustoms.com/ |
|
|
|
04-28-2006, 03:37 PM
|
#2 |
|
Until Seventy Times Seven
Join Date: Feb 2005
Location: Rocky Mountain Front Range
Posts: 1,301
|
Re: Question
The stock front end doesn't necessarily need updating. But, if you looking to lower the front, you could send for some 2 1/2" or 3" drop spindles from DJM, Western Chassis or Bell Tech. If you choose 3" spindles, you may have to trim the lip on the LCA, especially if you're running 15" wheels. A popular update is to replace all the worn parts on the front suspension. If interested, http://67-72chevytrucks.com/vboard/s...d.php?t=189574 has information on this update. Of course, running tubular arms will change some of what you will need to replace. BTW, the rotors can be upgraded depending if you decide to upgrade the front brakes, although it is not necessary.
__________________
boxRODz 1983 C10 SWB Fleetside When two halves is gone, there's nuthin left. Two nothings is nuthin. That's mathematics son. You can argue with me but you can't argue with figures. Two half nothings is a whole nuthin... |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
