Bed repair parts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jimmydean · 04-29-2006, 01:36 AM

I got a nice bedside that is straight, but the inside has some small issues. The yard cut the bed floor to remove it and I noticed the bolt hole holding the floor are rusted out. Is there a patch panel that I can weld in to replace the square bolt holes that mount the side to the floor?

I have looked and found nothing, any help would be great.

jimmydean · 04-30-2006, 03:03 AM

Does nobody know? Is there no patch panel for the inside wall where the side mounts to the floor?

mbgmike · 04-30-2006, 10:56 AM

Not that we know of. Would not be hard to fabricate

**Hart_Rod** · 04-30-2006, 11:09 AM

I think Classic Industries sells some bed repair panels.

Rob

jimmydean · 04-30-2006, 11:28 AM

Quote:

Originally Posted by mbgmike

Not that we know of. Would not be hard to fabricate

It's the square holes I'm host concerned with. Should I just get a punch I guess? It seems to be a common place for rust, so I figured there was someone who made a strip I could just cut and weld.

Guess it will be a little more work than that. Thanks.

mbgmike · 04-30-2006, 12:38 PM

We sell pre-bent 90 angles that are 60" wide. by 5.1/2" high for like $8.00 each plus shipping, but anyone with a brake can make one. These pieces are less than 24" long and you can buy a fairly inexpensive brake that can bend it. We sell brakes also but you can generally find someone that has one. Custom sign shops have em. Of course fab shops have them
The holes you can file out square with a small file. Not a whole lot of work.

04-29-2006, 01:36 AM	#1
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Bed repair parts? I got a nice bedside that is straight, but the inside has some small issues. The yard cut the bed floor to remove it and I noticed the bolt hole holding the floor are rusted out. Is there a patch panel that I can weld in to replace the square bolt holes that mount the side to the floor? I have looked and found nothing, any help would be great.

04-30-2006, 03:03 AM	#2
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Bed repair parts? Does nobody know? Is there no patch panel for the inside wall where the side mounts to the floor?

04-30-2006, 10:56 AM	#3
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Bed repair parts? Not that we know of. Would not be hard to fabricate

04-30-2006, 11:09 AM	#4
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,840	Re: Bed repair parts? I think Classic Industries sells some bed repair panels. Rob __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

04-30-2006, 12:38 PM	#6
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Bed repair parts? We sell pre-bent 90 angles that are 60" wide. by 5.1/2" high for like $8.00 each plus shipping, but anyone with a brake can make one. These pieces are less than 24" long and you can buy a fairly inexpensive brake that can bend it. We sell brakes also but you can generally find someone that has one. Custom sign shops have em. Of course fab shops have them The holes you can file out square with a small file. Not a whole lot of work.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.