Inner Fender & Pwr Steer. Questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JimKshortstep4x4 · 05-12-2006, 08:19 PM

The metal parts of the hoses attached to the steering box are clamped to the frame with a "M" shaped clamp using a 5/16 bolt. Here is a pic of the setup without the fender liner in place. (The fender liner covers the lines clamped to the frame).

Jim

Fred T · 05-12-2006, 08:28 PM

Here's a pick from a stock 68.

05-12-2006, 08:19 PM	#1
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Inner Fender & Pwr Steer. Questions The metal parts of the hoses attached to the steering box are clamped to the frame with a "M" shaped clamp using a 5/16 bolt. Here is a pic of the setup without the fender liner in place. (The fender liner covers the lines clamped to the frame). Jim Attached Images

05-12-2006, 08:28 PM	#2
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	Re: Inner Fender & Pwr Steer. Questions Here's a pick from a stock 68. Attached Images __________________ Fred There is no such thing as too much cam...just not enough engine.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.