4x4 Power steering ????? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 10-06-2002, 02:44 PM

I know this has been asked but I can't remember. I have a 67 and 68 4x4. Will the power steering unit off a 72 4x4 work on either one of mine? Thanks Randy

**jerry moss** · 10-06-2002, 07:40 PM

it can be done but there are some modifications that must be made for it to function properly. i've done this same swap a few times but i always swapped over to a disc brake front axle at the same time. if you are interested you can call me and i'll explain how we did them- i type too slow to try and put all the information here,lol. my number is 925-634-2512 and i'm up til at least 9 p.m. ca. time, mon-fri i get home from work around 5 p.m.

Longhorn Man · 10-06-2002, 07:48 PM

Do the 4X4's have the same poblem as the 2 wheel drive when it comes to gear boxes?

Alaskan · 10-06-2002, 08:15 PM

Check out my web page. I did mine about 3 years ago. Not sure about the 2wd trucks.

breeh · 10-06-2002, 09:45 PM

I ordered a kit from Rez Engineering to do this upgrade. I know that you can just bush the steering box out to make it work but I wanted to increase the rigidity also. These frames are prone to cracking with oversize tires. The kit includes two steel plates, one for the inner frame and one for the outside of the frame. I don't have their phone number with me right now but if you want it let me know and I will dig it up.

teeitup · 10-06-2002, 10:00 PM

THANKS EVERYONE,
Jerry I'll call you about this later on. I have the disc brake frontend to put in also so I might as well do it all. I have to get ahold of my mechanic to see when he's free. THANKS again to everyone. All input is appreciated!!! I'll check out what everyone has done. Randy

Pont · 10-07-2002, 04:23 AM

I have also done this swap on my 67. You will defintely need to space the steering box away from the frame or modify the frame to clear the buldge in the side of the steering box. As for the rest of the swap, I'm not sure what all is invloved if going with a stock type steering. I changed to a later disc Dana 44 and crossover steering when I did mine.

10-06-2002, 02:44 PM	#1
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	4x4 Power steering ????? I know this has been asked but I can't remember. I have a 67 and 68 4x4. Will the power steering unit off a 72 4x4 work on either one of mine? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-06-2002, 07:40 PM	#2
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,947	it can be done but there are some modifications that must be made for it to function properly. i've done this same swap a few times but i always swapped over to a disc brake front axle at the same time. if you are interested you can call me and i'll explain how we did them- i type too slow to try and put all the information here,lol. my number is 925-634-2512 and i'm up til at least 9 p.m. ca. time, mon-fri i get home from work around 5 p.m. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

10-06-2002, 07:48 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Do the 4X4's have the same poblem as the 2 wheel drive when it comes to gear boxes? Attached Images

10-06-2002, 08:15 PM	#4
Alaskan Truck'n the alcan Join Date: Jan 2001 Location: Houston, AK Posts: 149	Check out my web page. I did mine about 3 years ago. Not sure about the 2wd trucks. __________________ 68 GMC 4x4 71 C20 Custom Deluxe 83 1/2 ton conversion van

10-06-2002, 09:45 PM	#5
breeh Recovering 67-72 Addict Join Date: Oct 2000 Location: North Bend, WA Posts: 1,788	I ordered a kit from Rez Engineering to do this upgrade. I know that you can just bush the steering box out to make it work but I wanted to increase the rigidity also. These frames are prone to cracking with oversize tires. The kit includes two steel plates, one for the inner frame and one for the outside of the frame. I don't have their phone number with me right now but if you want it let me know and I will dig it up. __________________ 68 Short Fleet 4x4; 427; BTO Level 3 700R4; NP205; Dana 60 front and rear; 4" lift with 35's; Disc brakes; AGR variable ratio steering; factory bucket seats; factory tach and tilt. "Friends call me cruzer cuz I like fast cars and fast women"

10-06-2002, 10:00 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	THANKS EVERYONE, Jerry I'll call you about this later on. I have the disc brake frontend to put in also so I might as well do it all. I have to get ahold of my mechanic to see when he's free. THANKS again to everyone. All input is appreciated!!! I'll check out what everyone has done. Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

10-07-2002, 04:23 AM	#7
Pont I need another Barley Pop Join Date: Feb 2001 Location: Grants Pass, OR Posts: 1,629	I have also done this swap on my 67. You will defintely need to space the steering box away from the frame or modify the frame to clear the buldge in the side of the steering box. As for the rest of the swap, I'm not sure what all is invloved if going with a stock type steering. I changed to a later disc Dana 44 and crossover steering when I did mine. __________________ 67 Short Fleet 4x4 04 Honda CRF450R 89 Toyota 4-Runner 34 Ford 2 door sedan - Long term project ---------------------------------------------- There is a very fine line between "hobby" and "mental illness"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.