I know this has been beat to death, but...... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jugernot · 05-18-2006, 04:58 PM

I did a search and could not find what I was looking for. I need some ideas on where to put the filler neck for my 68 chevy stepside with blazer tank.

I have seen the side marker option (very nice ), but I was wondering if ther was anything else. I do not like the idea of a bed floor filler.

Throw some ideas at me, please.

thecatseye66 · 05-18-2006, 05:13 PM

Hinged fuel door blended into the fender...
Removable cover on a stake pocket...

You don't have a lot of options left!

glock35ipsc · 05-18-2006, 05:13 PM

* Find a donor filler door assembly from a junkyard car/truck and put it in the back side or rear of the fender,

* Put the door in the bed side, make an enclosure for the inner stuff

Not much comes to mind for inside the bed, but not on the floor, since the corners are square and there being no wheel tubs to creat "pockets" in the corners..... if that made sense. LOL!

Joe67 · 05-18-2006, 05:21 PM

Mine is going into the bed floor

glock35ipsc · 05-18-2006, 05:23 PM

#1 - Side of the fender
#2 - Rear of the fender
#3 - Top of the bed side, with the tube running inside that corner piece

rambler · 05-18-2006, 05:30 PM

forget about it.. with the cost of gas, noone can afford to fill up anyways!

not sure if this would work, but how a hinged license plate cover? I had a old Mercury Montago like that ??

ratrod67 · 05-18-2006, 05:32 PM

I have mine in the wheelwell on my 67. Bed floor on my 72.

cdowns · 05-18-2006, 05:34 PM

number of options is directly depandent on the imagination of the optionee

Old Yeller 1970 · 05-18-2006, 07:10 PM

Most folks who aren't 67-72 nut cases like us, think mine is factory at first.

Chevrolet4x4s · 05-18-2006, 07:26 PM

You could put it below the tailgate in the center couldn't you?
Shane

1LoC10 · 05-18-2006, 08:05 PM

get one of these
http://www.ridetech.com/productinfo/coolcap.asp

**special-K** · 05-18-2006, 09:01 PM

I had a car tank in a truck with the filler in the center rear/flip-down tag mount from same car.Redneck`67 put a filler door in the fender just lately.

05-18-2006, 05:21 PM	#4
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Re: I know this has been beat to death, but...... Mine is going into the bed floor __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

05-18-2006, 05:23 PM	#5
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: I know this has been beat to death, but...... #1 - Side of the fender #2 - Rear of the fender #3 - Top of the bed side, with the tube running inside that corner piece __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

05-18-2006, 05:30 PM	#6
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Re: I know this has been beat to death, but...... forget about it.. with the cost of gas, noone can afford to fill up anyways! not sure if this would work, but how a hinged license plate cover? I had a old Mercury Montago like that ?? __________________ No matter where you are..... There you are... Buckaroo Banzi

05-18-2006, 05:32 PM	#7
ratrod67 Registered User Join Date: Sep 2002 Location: DFW Texas Posts: 2,269	Re: I know this has been beat to death, but...... I have mine in the wheelwell on my 67. Bed floor on my 72.

05-18-2006, 05:34 PM	#8
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: I know this has been beat to death, but...... number of options is directly depandent on the imagination of the optionee __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

05-18-2006, 04:58 PM	#1
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	I know this has been beat to death, but...... I did a search and could not find what I was looking for. I need some ideas on where to put the filler neck for my 68 chevy stepside with blazer tank. I have seen the side marker option (very nice ), but I was wondering if ther was anything else. I do not like the idea of a bed floor filler. Throw some ideas at me, please. __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

05-18-2006, 05:13 PM	#2
thecatseye66 '68 C-20 396 CST CC Join Date: Mar 2005 Location: Spokane, WA Posts: 454	Re: I know this has been beat to death, but...... Hinged fuel door blended into the fender... Removable cover on a stake pocket... You don't have a lot of options left! __________________ 68 C-20 396/TH400 CST Custom Camper NOW W/DISC BRAKES 01 Jetta Turbo Daily Driver 84 Yamaha Virago 700 - Alaska to Florida Via Maine & Mexico Last edited by thecatseye66; 05-18-2006 at 05:26 PM.

05-18-2006, 07:10 PM	#9
Old Yeller 1970 DON'T TREAD ON ME Join Date: May 2005 Location: Crosby County, TX Posts: 989	Re: I know this has been beat to death, but...... Most folks who aren't 67-72 nut cases like us, think mine is factory at first. Attached Images __________________ Old Yeller

05-18-2006, 07:26 PM	#10
Chevrolet4x4s Registered User Join Date: Nov 2005 Location: WV Posts: 227	Re: I know this has been beat to death, but...... You could put it below the tailgate in the center couldn't you? Shane __________________ 1993 K1500 350 5 speed 1985 K10 Silverado Vortec 406 5 speed (in body shop) "I been drivin' this '85 pickup truck Them buddies of mine call it a bucket of rust She's a little beat up but she still runs like the wind Yeah, kinda like me I been banged and bruisedBeen around the block a time or two But I'm runnin' like new goin' places I never been No, I ain't broke I'm just broken in" 1963 Dodge Townwagon(its amazng what 30 years and zero miles will do to a vehicle ) Member#20327

05-18-2006, 08:05 PM	#11
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: I know this has been beat to death, but...... get one of these http://www.ridetech.com/productinfo/coolcap.asp __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

05-18-2006, 09:01 PM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: I know this has been beat to death, but...... I had a car tank in a truck with the filler in the center rear/flip-down tag mount from same car.Redneck`67 put a filler door in the fender just lately. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.