Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
05-23-2006, 10:07 PM | #1 |
WTB this ad
Join Date: Sep 2004
Location: Lafayette Georgia
Posts: 5,074
|
Matching #s ? C'mon you nitpickers!
I have spotted a low mileage cheyenne SWB with a big block, tach tilt, cruise,AC , AM/FM blah blah blah. After talking with the owner it comes out that the big block and th400 trans came out of a different truck of the same year. By running the #s on the engine it is correct for the truck although the build sheet says 350. The only dead giveaway to it not being factory is the low trans hump. My question is would this cause you to be willing to pay less for the truck? I don't want to know what it's worth, just technicaly is it worth less without the original engine even though the one it currently has is correct for the year?
|
05-23-2006, 10:17 PM | #2 |
Registered User
Join Date: Jan 2002
Location: cornville, maine
Posts: 659
|
Re: Matching #s ? C'mon you nitpickers!
I pay more for a correct set up, but it is likely that the current set-up is more valuable than a 350 setup, matching or not. The highest cash goes to matching numbers bigblocks, in my opinion.
__________________
jku Cornville, Maine 68 C10 burb 42 Willys MB 46 Dodge WF-32 1.5 ton 53 & 56 Olds' 60 Cadillac 22 Dodge Brothers |
05-23-2006, 10:17 PM | #3 | |
Son Of Gravel Man
Join Date: Mar 2005
Location: Cleveland OH
Posts: 638
|
Re: Matching #s ? C'mon you nitpickers!
Without along detailed description in word.........
Yes
__________________
Daily driven 70 C10 longbed Its a work in progress Quote:
|
|
05-23-2006, 11:38 PM | #4 |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: Matching #s ? C'mon you nitpickers!
I pay more to get a truck like I want it. I could care less if it has matching numbers. It's not a COPO 427 Camaro
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
05-23-2006, 11:57 PM | #5 |
Next project: 1970 K10
Join Date: Feb 2004
Location: Fort Collins, Colo 80524
Posts: 6,684
|
Re: Matching #s ? C'mon you nitpickers!
Let's see if this makes sense (I am a little sleepy) - To me, it would not be worth less just because of the different engine, but it would be worth more if it were the correct engine per the build sheet.
__________________
Bob 1970 Chevy K10 LWB "Goldie" 350/TH350 next project!! 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 05-23-2006 at 11:57 PM. |
05-24-2006, 12:03 AM | #6 |
Truck junkie
Join Date: May 2006
Location: Reno NV
Posts: 697
|
Re: Matching #s ? C'mon you nitpickers!
^^^^^ What N2TRUX said....I deal with streetrods and muscle cars all day and with rs ss big block four speed camaros or big block four speed corvettes etc. the worth goes way up with the numbers matching but with pickup trucks unless its a perfect showroom condition mint piece or something special with low production numbers the numbers thing doesn't really come into play. jmo though
Last edited by Oldtruckfanatic; 05-24-2006 at 12:05 AM. Reason: typos |
05-24-2006, 12:54 AM | #7 |
RIP Mr Ron
Join Date: Dec 2005
Location: Big Sandy, Tn. 38221
Posts: 8,150
|
Re: Matching #s ? C'mon you nitpickers!
If you are buying the truck for an investment the numbers match issue is to be considered. If you are buying it to drive and have fun with then stuff the biggest, baddest, engine you can find under the hood and have fun.
__________________
Ron (Mr Round Tuit) Be kinder than necessary, for everyone you meet is fighting some kind of battle TN Message Forum TN Facebook Group SETN Truck Show My Photobucket |
05-24-2006, 05:26 AM | #8 |
WTB this ad
Join Date: Sep 2004
Location: Lafayette Georgia
Posts: 5,074
|
Re: Matching #s ? C'mon you nitpickers!
Well what you guys are throwing at me pretty much mirrors what I was already thinking. I realize we aren't talking matching #s vettes or big block Camaros here. These trucks are drying up when it comes to finding well optioned SWB units. I think I would rather have a SWB with a non original motor than go through the work of cutting down a LWB with matching #s.
|
05-24-2006, 07:13 AM | #9 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: Matching #s ? C'mon you nitpickers!
I agree with all this,too.Except I disagree with the car snobery comments about it not being a COPO car or something.Sure,there`s the big buck rare birds.There`s more to it than the investment value and just because a "rare" loaded truck won`t fetch the record setting numbers of some of these cars doesn`t cancel all other values out.Investers are what have trashed things for hobbyists.The guys that plunk down the huge bucks for someone elses work are the same ones that turned their heads on "all" these vehicles for 20 or more years in favor of the latest new & improved offerings.Only to turn around and drive the value up of their cast-offs by wanting them back.So,the attitude towards the value of a given truck should be carried by the knowledge that it`s unusual to have survived this mentality and with what we`ve seen occur with values,the values will only climb to where we can`t imagine,now.
I`m not a purist,I have hotrod blood.But,a factory numbers matching big block short Fleetside loaded CheyenneSuper is the top dog in the "truck world" and will only climb in value at a progressively greater rate as the years go by.Just a "real nice" truck will,too.I just look at it like what it has and what it took to get that way to decide a value.That,and the "want" factor.Gotta what that one.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
05-24-2006, 11:46 AM | #10 | |
Registered User
Join Date: Aug 2001
Location: SOMERSET KY.
Posts: 6,425
|
Re: Matching #s ? C'mon you nitpickers!
Quote:
__________________
junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST |
|
05-24-2006, 12:01 PM | #11 |
Truck junkie
Join Date: May 2006
Location: Reno NV
Posts: 697
|
Re: Matching #s ? C'mon you nitpickers!
Wow...I wasn't trying to be a car snob. I used those particular cars as an example because the numbers matching thing can drive the price of those cars into obscenity. I never said the truck wasn't a good investment just that right now in the truck market it doesn't come into play as much. In reality thats a good thing because us truck guys can still find a factory big block truck with all the options and not have to pay $100,000 dollars for it. I will say that day is coming though. I'm only 33 and I remeber buying a 383 4 speed 69 super bee when I was 17 for $3000.00 you can hardly touch a rusty shell for that now and soon a factory big block truck with a posi and all the options will be unobtainable to normal folks too just thankfully hasn't happened yet. Oops almost forgot the above is still just my opinion and thats all it is.
Last edited by Oldtruckfanatic; 05-24-2006 at 12:04 PM. |
05-24-2006, 01:01 PM | #12 |
Registered User
Join Date: Aug 2005
Location: OCEAN SHORES WASHINGOTN
Posts: 57
|
Re: Matching #s ? C'mon you nitpickers!
I guess I got timed out of my post so I am going to try again. I have worked in the business and have had my own garage working on mostly imports like Mercedes, Toyota, Volkswagon, and some domestic light trucks. I have found that most of the time location and economics is what drives up the cost of a vehicle. Not by what type it might be or what might be in it. If someone needs the money they will usually ask for more then what it is worth, Inflation! No matter what it seems that everywhere you might go you will find people asking for more then a 30 year old vehicle is worth. $300. thats it. if it runs. To collectors it is worth more only if they are desperate to have there long life's dream of what they remember to be a good time. You can't get $300 from a car dealer on a 30 year old vehicle. It's what you call a specialty item and only so many people will purchase something that does not have a warrenty no matter how bad the warrenty might be.
__________________
83 GMC Vandura 1 Ton 84 Chevy S-10 4x4 Durango 84 Ford 1 ton Cargo van |
05-24-2006, 01:52 PM | #13 |
Registered User
Join Date: Feb 2005
Location: Texas
Posts: 581
|
Re: Matching #s ? C'mon you nitpickers!
cars suck!! LOL
|
05-24-2006, 03:47 PM | #14 |
Keepin an eye out
Join Date: Feb 2003
Location: So.Cal
Posts: 3,920
|
Re: Matching #s ? C'mon you nitpickers!
As long as it doesnt have a F*0rd engine...I could care less
__________________
1970 Chevy C10 SWB 5.3 1996 Toyota Tacoma SR5 4x4 2007 Vespa GTS 250 Scooter ZIP 91351 |
05-24-2006, 04:44 PM | #15 |
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,992
|
Re: Matching #s ? C'mon you nitpickers!
Other than the ultra rare or collectible examples above the only place I can see "Numbers Matching" being a big issue is on LOTTO night.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
05-24-2006, 04:59 PM | #16 |
Registered User
Join Date: Feb 2005
Location: Texas
Posts: 581
|
Re: Matching #s ? C'mon you nitpickers!
My numbers match although it is hard to keep numbers matching. If it were to cost me 4000 buck to repair a cab opposed to buying one for 400 you know what I would do. I'm sure you would do the same.
|
05-24-2006, 05:09 PM | #17 |
71 GMC 454/TH400
Join Date: Dec 2005
Location: Blue Mound TX
Posts: 214
|
Re: Matching #s ? C'mon you nitpickers!
This is how things work around here at least lately irregardless of numbers anything with a big block brings way more than a small block, good luck buying anything big block in north texas for less than 5 g's
__________________
"The bigger you are the harder you fall, the farther you walk the longer you crawl." |
05-24-2006, 05:15 PM | #18 | |
Registered User
Join Date: Nov 2005
Location: WV
Posts: 227
|
Re: Matching #s ? C'mon you nitpickers!
Quote:
Shane
__________________
1993 K1500 350 5 speed 1985 K10 Silverado Vortec 406 5 speed (in body shop) "I been drivin' this '85 pickup truck Them buddies of mine call it a bucket of rust She's a little beat up but she still runs like the wind Yeah, kinda like me I been banged and bruisedBeen around the block a time or two But I'm runnin' like new goin' places I never been No, I ain't broke I'm just broken in" 1963 Dodge Townwagon(its amazng what 30 years and zero miles will do to a vehicle ) Member#20327 |
|
05-24-2006, 05:46 PM | #19 |
Registered User
Join Date: Feb 2005
Location: Texas
Posts: 581
|
Re: Matching #s ? C'mon you nitpickers!
Mine Is original equipment 402 all # match I got lucky but it is a South Texas truck and has all typical areas of trouble
Last edited by 72 Cheyenne402; 05-24-2006 at 05:49 PM. |
05-24-2006, 06:16 PM | #20 |
Registered User
Join Date: Jan 2005
Location: Eastern Nebraska
Posts: 613
|
Re: Matching #s ? C'mon you nitpickers!
Does not bother me that my numbers don't match. Heck, numbers from frame and cab don't match...cause my truck is a mutt.
I didn't buy it to be a trailer queen, or as an investment. I bought it to be a really neat old truck that I like driving around town.
__________________
'72 Chevy K-20 Crate 350, SM465, 4.10's |
05-24-2006, 06:45 PM | #21 | |
Registered User
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
|
Re: Matching #s ? C'mon you nitpickers!
Quote:
I couldn't agree more. A nice truck is just that. I personally don't give a rats a $$ about numbers.
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction. |
|
05-24-2006, 07:08 PM | #22 |
Happy to be here
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
Re: Matching #s ? C'mon you nitpickers!
I'm no 67-72 expert by any means, but I do watch the prices on them when I can. From what I have seen a restored truck with OEM options added that may not be correct for that truck model or year will bring as much if not more than a 100% correct truck will. Most "truck" buyers aren't purist when it comes to matching numbers.....
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
05-24-2006, 11:01 PM | #23 |
WTB this ad
Join Date: Sep 2004
Location: Lafayette Georgia
Posts: 5,074
|
Re: Matching #s ? C'mon you nitpickers!
Well I went and checked it out today in person. It was tight but hadn't been kept up. The owner claimed the miles were original (54,000) and the truck had never been repainted. I could only find a couple pinholes in either rocker panel. The cab corners were perfect, the doors were near perfect, no rust under the battery whatsoever. The bed was about as good as it gets, no dents no rust just some holes in the tops of the bedsides from bedrails or a toolbox. It would make a great start but it needed painted something terrible. The interior was shot, the heater core was leaking, clutch was gone on the A/C compressor. The factory tach didn't work either. I know it sounds like I am being picky but it was priced high enough that it should have been in better shape. I checked the build sheet and the truck wasn't a Cheyenne, and didn't come with the Tach or tilt. I was polite and told the gentleman that it really wasn't what I was looking for but I was going to look around some more and if he still had it in a month or so maybe we could have a meeting of Number$. Owner was animate that he was taking a loss but I feel like he was still a couple grand to high.
|
05-25-2006, 05:36 AM | #24 |
4 eyed fever
Join Date: Jul 2005
Location: Eureka, Nevada
Posts: 500
|
Re: Matching #s ? C'mon you nitpickers!
I didn't think a BB and th400 would fit under a low hump.
__________________
1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!! |
05-25-2006, 08:56 AM | #25 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: Matching #s ? C'mon you nitpickers!
Imagine that,not getting what you put into a vehicle.Hey,I just wanted to make a point before.There`s middle ground between COPO cars and the "won`t ever be collectible".A non-original truck that is finished out in the highest quality can be worth as much or more than an original "if" it`s a custom and that`s what a buyer wants.There is a huge market for that,like any desireable vehicle.Look at the Tri-5s.A pro-street or Foose-style`57 can bring huge numbers,even more than an original.But a Belair with a color change,Power-Pak,posi,a/c,power options that were not original to the vehicle will not bring as much as the same numbers-matching Belair.The same holds true for these trucks.There are multiple markets within one model.Just because they don`t bring six digits doesn`t mean originality doesn`t count.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
Bookmarks |
|
|