|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-08-2002, 12:01 AM
|
#1 |
|
Registered User
Join Date: Dec 2001
Location: Philadelphia, pa. U.S.A.
Posts: 87
|
78 front crossmember swap?
I know this has been on here before, but just making sure before I do it. I have a 78 parts truck. I can unbolt front crossmember with everything still attached and roll it right under my 69 frame, right?
thanks |
|
|
|
10-08-2002, 01:21 AM
|
#2 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Yes, that will work. altho i havent done that swap, i understand that there a couple bolt holes that need to be "egged out". im sure somebody has all the info. Good luck.....crazy longhorn
|
|
|
|
|
10-08-2002, 06:06 PM
|
#3 |
|
poker face
Join Date: Jul 2002
Location: Saskatoon, Saskatchewan
Posts: 218
|
I just did that mod a little while ago. Yes it works, but you have to oblong two holes and drill two new ones. These holes are located on the vertical part of the frame ( where the upper control arm mounts.) Also you have to use the "69 motor mounts. The '78 mounts are too tall. The newer style frame is a taller unit. This in no way affects the suspension swap. Even the power steering and idler arm bolt right up from the '78. Good luck.
__________________
If you could kick the person in the *ss responsible for most of your trouble, you wouldn't sit for a month. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
