16 x 10 Ralleys? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stllookn · 10-07-2002, 04:31 PM

I have not been able to find any 16 x 10 ralleys. Anyone know if these are even made? I wanted 8's in front and 10's in the rear.

imaindianoutlaw · 10-07-2002, 05:34 PM

Check wheel vintiques!

HotRod929 · 10-07-2002, 05:45 PM

Do they have a web site or something?

HotRod

imaindianoutlaw · 10-07-2002, 05:55 PM

www.wheelvintiques.com

stllookn · 10-07-2002, 06:11 PM

They are not listed on the site but I called and they have them in 16x10 for $130/ea. The 16x8's are $90/ea. I priced it all out with caps and beauty rings at $704 w/o tax, lug nuts or stems. I think I'm going to think this one through again...a little more than we wanted to spend at this time.

imaindianoutlaw · 10-07-2002, 06:59 PM

<<<<<

crazy longhorn · 10-07-2002, 07:13 PM

Ouch! I checked into a set of 15x 10s with special offset......it looked like about $155-160 a pop with shipping (just the wheels). I made a couple local calls, & was sent to Early wheel, where I got a pair of 15 x 10 shells for 35 ea,+ shipping. Pete is a good guy to talk with,or deal with. I cut the centers out of a set of 6 1/2" van ralleys & blasted them,then tapped them into the shells & set up the back space.........they are still on the bench, need to indicate them in & weld,but Ill be damned if I will pay that kind of money for steel wheels! any off shelf ralley is pretty cheap, but custom bites. my thoughts are , if you have a local bud willing to indicate & weld.....or feel like doing it yourself you can save a bunch of $. I ll try to dig up the site.... http://www.earlywheel.com/ good luck ......crazy longhorn

JD72 · 10-07-2002, 09:45 PM

I have got their 15 x 10's and 15 x 8's on mine, call them back and get a quote for the 17" billet rallyes it will make the 16's sound like a good deal.

slam33 · 10-07-2002, 11:00 PM

get them at Summit, there a lot cheeper

**Bowtie468** · 10-07-2002, 11:15 PM

Hey stlookn, wow thats a heck of a difference between 15 and 16. The 16's would look sweet though. Saw a set once on a '69 camaro pace car. Man talk about get someones attention! Are you stuck on 16's or would you consider 15" ?? Here's why : Last week i called and spoke to Larry at Wheel Vintiques about some powdercoated camaro style rallys in a truck pattern. Talked about some 15x6 which were $ 77.50 each (wheel only) and also some 15x10 for $ 82.50 each. He said he has a 15x12 also. (didnt get a price on that one) We started talking about backspacing. I mentioned that i would need a little more backspacing than their standard runs offer ( now were talking custom ). I held my breath as i waited for his reply. He said, No problem Chris, just let me know exactly how much you need and we'll take care of it, for the same price. Well, needless to say i nearly dropped the phone. Larry is one cool guy, give him a call maybe he can help somehow. Good Luck

stllookn · 10-07-2002, 11:48 PM

They did seem very friendly. My son is stuck on the 16's for some reason...he knows exactly the tire and wheel combo that will look good for him. He has now switched to another wheel. I will still consider the 15's for my stepside...I am not that particular and like to see a little more tire sidewall than he does...hey it's a truck...not a go-kart!!!! I think I can get what I need for $400 with tires at the swap meet and then I will powder coat them at Larry's Stop and Coat (Orence1) in the body color I choose...LOL! I have a vision...and it does not include $700+ for wheels. This is a budget project. Those guys are great and if I get to the point where I need something very specific...they are the ones. Right now I am still trying to decide on just what ralley will look best on my truck...Truck Ralley, Corvette Ralley, Chevelle Ralley or Camaro Ralley...did I leave any out...oh yeah...Pontiac Ralley!

JD72 · 10-08-2002, 08:20 AM

here are 15 x 10's and 8's I'm running a p295/50 on the rear it looks strange cause the wheel tubs are out. Thinkin about a 15 x 12 for the rear.

JD72 · 10-08-2002, 08:21 AM

front dirty

stllookn · 10-09-2002, 12:24 AM

Those look great. We need the 16's since it will be lowered 5-5 and the control arms will hit on 15's. Need a larger wheel to clear. I guess he has looked it over pretty carefully. We have a friend with 15's lowered but the wheels don't fill the wheel well so we need a slightly larger wheel and slightly lower truck. Looks like it will Eagles or some other wheel.

10-07-2002, 04:31 PM	#1
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	16 x 10 Ralleys? I have not been able to find any 16 x 10 ralleys. Anyone know if these are even made? I wanted 8's in front and 10's in the rear. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-07-2002, 05:34 PM	#2
imaindianoutlaw GMC SHORT FLEET F/S Join Date: Jun 2000 Location: SOUTH WILLIAMSPORT PENNSYLVANNIA Posts: 2,117	Check wheel vintiques! __________________ CHARLES WADE HEIN HVACR FOREMAN. LEWISBURG U.S.P.

10-07-2002, 05:45 PM	#3
HotRod929 Registered User Join Date: Mar 2002 Location: Bondurant, IA but in Worcester, MA for school Posts: 767	Do they have a web site or something? HotRod __________________ 1970 Chevy C-20 350 V-8 Turbo 350 w/ shift kit Dana 60 w/ 4.10 gears AND Powr-Loc POSI New Additions: Summit Headers 135amp alternator Proform HEI Edelbrock 1406 600cfm carb Sunpro Tach Powr-Loc POSI Edelbrock Performer RPM Intake MSD 6A Ignition Box AIM: HotRod929 Visit My Site: http://1970chevy.netfirms.com/

10-07-2002, 05:55 PM	#4
imaindianoutlaw GMC SHORT FLEET F/S Join Date: Jun 2000 Location: SOUTH WILLIAMSPORT PENNSYLVANNIA Posts: 2,117	www.wheelvintiques.com __________________ CHARLES WADE HEIN HVACR FOREMAN. LEWISBURG U.S.P.

10-07-2002, 06:11 PM	#5
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	They are not listed on the site but I called and they have them in 16x10 for $130/ea. The 16x8's are $90/ea. I priced it all out with caps and beauty rings at $704 w/o tax, lug nuts or stems. I think I'm going to think this one through again...a little more than we wanted to spend at this time. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-07-2002, 06:59 PM	#6
imaindianoutlaw GMC SHORT FLEET F/S Join Date: Jun 2000 Location: SOUTH WILLIAMSPORT PENNSYLVANNIA Posts: 2,117	<<<<< Attached Images __________________ CHARLES WADE HEIN HVACR FOREMAN. LEWISBURG U.S.P.

10-07-2002, 07:13 PM	#7
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Ouch! I checked into a set of 15x 10s with special offset......it looked like about $155-160 a pop with shipping (just the wheels). I made a couple local calls, & was sent to Early wheel, where I got a pair of 15 x 10 shells for 35 ea,+ shipping. Pete is a good guy to talk with,or deal with. I cut the centers out of a set of 6 1/2" van ralleys & blasted them,then tapped them into the shells & set up the back space.........they are still on the bench, need to indicate them in & weld,but Ill be damned if I will pay that kind of money for steel wheels! any off shelf ralley is pretty cheap, but custom bites. my thoughts are , if you have a local bud willing to indicate & weld.....or feel like doing it yourself you can save a bunch of $. I ll try to dig up the site.... http://www.earlywheel.com/ good luck ......crazy longhorn

10-07-2002, 09:45 PM	#8
JD72 WTF Join Date: Jul 2000 Location: loganville, Ga. Posts: 118	I have got their 15 x 10's and 15 x 8's on mine, call them back and get a quote for the 17" billet rallyes it will make the 16's sound like a good deal. __________________ Some people are wise, some people are otherwise. 72 cheyenne primer factory air lowered rallyes with flat caps flowmasters 12 bolt 3.73 350/350 combo needs rockers . Cowl hood installed. 81 Malibu wagon lowered with 17's bright ass yellow and v-6. 71 225 Electra all original 455/4 81 z28

10-07-2002, 11:00 PM	#9
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	get them at Summit, there a lot cheeper __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

10-07-2002, 11:15 PM	#10
Bowtie468 Senior Member Join Date: Jun 2002 Location: Cecilia, Louisiana Posts: 1,638	Hey stlookn, wow thats a heck of a difference between 15 and 16. The 16's would look sweet though. Saw a set once on a '69 camaro pace car. Man talk about get someones attention! Are you stuck on 16's or would you consider 15" ?? Here's why : Last week i called and spoke to Larry at Wheel Vintiques about some powdercoated camaro style rallys in a truck pattern. Talked about some 15x6 which were $ 77.50 each (wheel only) and also some 15x10 for $ 82.50 each. He said he has a 15x12 also. (didnt get a price on that one) We started talking about backspacing. I mentioned that i would need a little more backspacing than their standard runs offer ( now were talking custom ). I held my breath as i waited for his reply. He said, No problem Chris, just let me know exactly how much you need and we'll take care of it, for the same price. Well, needless to say i nearly dropped the phone. Larry is one cool guy, give him a call maybe he can help somehow. Good Luck __________________ Chris click here to see my buildpage http://67-72chevytrucks.com/vboard/s...d.php?t=394656 ---------------------------------- 1979 C10 Silverado Big10 SWB Factory 454/400 Cardinal Red/Santa Fe Tan (original paint) 1969 Camaro X44 LS swap 1968 C10 SWB Fleetside (SOLD) 468BBC MultiPort TPI / Dynamic EFI P4 Black/Black 1963 Nova SS convertible (SOLD) 194 I6/ PowerGlide

10-07-2002, 11:48 PM	#11
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	They did seem very friendly. My son is stuck on the 16's for some reason...he knows exactly the tire and wheel combo that will look good for him. He has now switched to another wheel. I will still consider the 15's for my stepside...I am not that particular and like to see a little more tire sidewall than he does...hey it's a truck...not a go-kart!!!! I think I can get what I need for $400 with tires at the swap meet and then I will powder coat them at Larry's Stop and Coat (Orence1) in the body color I choose...LOL! I have a vision...and it does not include $700+ for wheels. This is a budget project. Those guys are great and if I get to the point where I need something very specific...they are the ones. Right now I am still trying to decide on just what ralley will look best on my truck...Truck Ralley, Corvette Ralley, Chevelle Ralley or Camaro Ralley...did I leave any out...oh yeah...Pontiac Ralley! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-08-2002, 08:20 AM	#12
JD72 WTF Join Date: Jul 2000 Location: loganville, Ga. Posts: 118	here are 15 x 10's and 8's I'm running a p295/50 on the rear it looks strange cause the wheel tubs are out. Thinkin about a 15 x 12 for the rear. Attached Images __________________ Some people are wise, some people are otherwise. 72 cheyenne primer factory air lowered rallyes with flat caps flowmasters 12 bolt 3.73 350/350 combo needs rockers . Cowl hood installed. 81 Malibu wagon lowered with 17's bright ass yellow and v-6. 71 225 Electra all original 455/4 81 z28

10-08-2002, 08:21 AM	#13
JD72 WTF Join Date: Jul 2000 Location: loganville, Ga. Posts: 118	front dirty Attached Images __________________ Some people are wise, some people are otherwise. 72 cheyenne primer factory air lowered rallyes with flat caps flowmasters 12 bolt 3.73 350/350 combo needs rockers . Cowl hood installed. 81 Malibu wagon lowered with 17's bright ass yellow and v-6. 71 225 Electra all original 455/4 81 z28

10-09-2002, 12:24 AM	#14
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Those look great. We need the 16's since it will be lowered 5-5 and the control arms will hit on 15's. Need a larger wheel to clear. I guess he has looked it over pretty carefully. We have a friend with 15's lowered but the wheels don't fill the wheel well so we need a slightly larger wheel and slightly lower truck. Looks like it will Eagles or some other wheel. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.