'96 350 vortech into a 87 chev 4x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

snowbuzzard · 06-01-2006, 11:47 PM

Have a line on a 350 Vortech out of a 96 pickup, how tuff would it be to put this into my 87 4x4 1/2 ton that has no lockup or overdrive trans? (TBI)

jimfulco · 06-02-2006, 12:20 AM

GM makes a TBI intake that fits Vortec heads. There may be some difficulty if you have EGR, but I think you just have to buy one exhaust manifold.

Jonboy · 06-02-2006, 08:40 AM

From what I was looking at, you may be abe to just use the '96 manifolds to rin the tube to the EGR. Or, if you don't have to use it for emissions in your state, just block it off.

Tom · 06-02-2006, 07:50 PM

It would be easy. Get the intake and drop it in.

Chevrolet4x4s · 06-02-2006, 11:27 PM

Couldnt you notch the center two boltholes like you do to put a carburated intake onto tbi vortech heads?
Shane

Tom · 06-04-2006, 02:01 PM

There are no center bolts on vortec heads.

06-01-2006, 11:47 PM	#1
snowbuzzard Registered User Join Date: Apr 2006 Location: mb canada Posts: 16	'96 350 vortech into a 87 chev 4x4 Have a line on a 350 Vortech out of a 96 pickup, how tuff would it be to put this into my 87 4x4 1/2 ton that has no lockup or overdrive trans? (TBI)

06-02-2006, 12:20 AM	#2
jimfulco Registered User Join Date: May 2003 Location: Shreveport LA Posts: 3,170	Re: '96 350 vortech into a 87 chev 4x4 GM makes a TBI intake that fits Vortec heads. There may be some difficulty if you have EGR, but I think you just have to buy one exhaust manifold.

06-02-2006, 08:40 AM	#3
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: '96 350 vortech into a 87 chev 4x4 From what I was looking at, you may be abe to just use the '96 manifolds to rin the tube to the EGR. Or, if you don't have to use it for emissions in your state, just block it off. __________________ 1974 Jimmy- 5.3/4L80e/NP241

06-02-2006, 07:50 PM	#4
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,714	Re: '96 350 vortech into a 87 chev 4x4 It would be easy. Get the intake and drop it in. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.

06-02-2006, 11:27 PM	#5
Chevrolet4x4s Registered User Join Date: Nov 2005 Location: WV Posts: 227	Re: '96 350 vortech into a 87 chev 4x4 Couldnt you notch the center two boltholes like you do to put a carburated intake onto tbi vortech heads? Shane __________________ 1993 K1500 350 5 speed 1985 K10 Silverado Vortec 406 5 speed (in body shop) "I been drivin' this '85 pickup truck Them buddies of mine call it a bucket of rust She's a little beat up but she still runs like the wind Yeah, kinda like me I been banged and bruisedBeen around the block a time or two But I'm runnin' like new goin' places I never been No, I ain't broke I'm just broken in" 1963 Dodge Townwagon(its amazng what 30 years and zero miles will do to a vehicle ) Member#20327

06-04-2006, 02:01 PM	#6
Tom driving is in my blood Join Date: Dec 1999 Location: Mesa AZ Posts: 5,714	Re: '96 350 vortech into a 87 chev 4x4 There are no center bolts on vortec heads. __________________ -78 c10 short/step: 388cid, M20, 5/5 drop, lots more. Playtoy and first vehicle. -98 c1500 x-cab: 5.7L, 17" rims, 5/6 drop, flowmaster, helper bags,NBS rear disk brakes. -02 Suburban 4x4: leveled front -CBR600F4i, CBR600RR, CBR1000RR, and standup skis DISCLAIMER: I cant spell for the life of me.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.