Polyurethane cab mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dmigura · 06-01-2006, 12:49 PM

I have a 1970 c-10 4x4 and the rubber cab mounts have just about had it. Just wondering if it would be better to polyurethane mounts would be better.
I am confused why it says it is a c10 and it is a 4x4. shouldnt it say k10.

**CUSTOM/10** · 06-01-2006, 01:59 PM

The poly mounts are much stiffer and will not flex as much as the rubber. If your looking for a comfortable ride use rubber. ( The poly mounts will last longer ) Look at your VIN tag it should start with a K if nobody has swapped the cab or tag.

Gary

1969 GMC · 06-01-2006, 07:10 PM

does the fender emblem say C/10? there was no "K" emblem, except for the K5 blazer. so if you have a plain jane truck with no trim packages, it will say C/10 even though its 4wd.

Chevrolet4x4s · 06-01-2006, 10:43 PM

Ooh was ebaying at school today had my work done.....and was wondering why it had these huge 4x4s as c-10s I thought it was owner neglegence....guess not
Shane

dmigura · 06-02-2006, 01:21 PM

yes it says c10 on the fender and to tell you the truth I have not even paid att. to the vin #. But when I order parts I should order for a k10?

1969K10 · 06-05-2006, 12:33 PM

The rear cab mounts will vary between a C-10 cab, and a K-10 or all heavy model cabs. Check you're cab to make sure of what you're ordering if you have any doubts...

IF I recall correctly, K & heavier the rear cab is on the outside of the frame rail, and the C-10's are on the back of the cab, on the inside of the frame rail... I might have this backwards...

us111 · 06-05-2006, 12:48 PM

when ordering cab mounts i have always been told to order cab mounts for the frame,not the cab,,i put a 2 wheel drive cab on my k-10 frame so i ordered mounts for the k-10 frame..

06-01-2006, 12:49 PM	#1
dmigura Registered User Join Date: Jul 2005 Location: South Texas Posts: 17	Polyurethane cab mounts I have a 1970 c-10 4x4 and the rubber cab mounts have just about had it. Just wondering if it would be better to polyurethane mounts would be better. I am confused why it says it is a c10 and it is a 4x4. shouldnt it say k10.

06-01-2006, 01:59 PM	#2
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,801	Re: Polyurethane cab mounts The poly mounts are much stiffer and will not flex as much as the rubber. If your looking for a comfortable ride use rubber. ( The poly mounts will last longer ) Look at your VIN tag it should start with a K if nobody has swapped the cab or tag. Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

06-01-2006, 07:10 PM	#3
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	Re: Polyurethane cab mounts does the fender emblem say C/10? there was no "K" emblem, except for the K5 blazer. so if you have a plain jane truck with no trim packages, it will say C/10 even though its 4wd. __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

06-01-2006, 10:43 PM	#4
Chevrolet4x4s Registered User Join Date: Nov 2005 Location: WV Posts: 227	Re: Polyurethane cab mounts Ooh was ebaying at school today had my work done.....and was wondering why it had these huge 4x4s as c-10s I thought it was owner neglegence....guess not Shane __________________ 1993 K1500 350 5 speed 1985 K10 Silverado Vortec 406 5 speed (in body shop) "I been drivin' this '85 pickup truck Them buddies of mine call it a bucket of rust She's a little beat up but she still runs like the wind Yeah, kinda like me I been banged and bruisedBeen around the block a time or two But I'm runnin' like new goin' places I never been No, I ain't broke I'm just broken in" 1963 Dodge Townwagon(its amazng what 30 years and zero miles will do to a vehicle ) Member#20327

06-02-2006, 01:21 PM	#5
dmigura Registered User Join Date: Jul 2005 Location: South Texas Posts: 17	Re: Polyurethane cab mounts yes it says c10 on the fender and to tell you the truth I have not even paid att. to the vin #. But when I order parts I should order for a k10?

06-05-2006, 12:33 PM	#6
1969K10 Senior Member Join Date: Jul 2004 Location: Clarks Hill, Indiana Posts: 733	Re: Polyurethane cab mounts The rear cab mounts will vary between a C-10 cab, and a K-10 or all heavy model cabs. Check you're cab to make sure of what you're ordering if you have any doubts... IF I recall correctly, K & heavier the rear cab is on the outside of the frame rail, and the C-10's are on the back of the cab, on the inside of the frame rail... I might have this backwards...

06-05-2006, 12:48 PM	#7
us111 Registered User Join Date: Jul 2004 Location: ashland oh Posts: 660	Re: Polyurethane cab mounts when ordering cab mounts i have always been told to order cab mounts for the frame,not the cab,,i put a 2 wheel drive cab on my k-10 frame so i ordered mounts for the k-10 frame..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.