floor pieces for sale, cab for parts in AZ

[t korinek]

I cut the floor out of a 68 truck, low hump, has a hole cut for shifter, there's rust in the rockers & @ the front corners, the rest is solid. any piece of the floor $20 + shipping. Will also be parting 2 other trucks in the next week & will probably be cutting up the cabs. Thanks, Tom 480-241-1318

[qksilver]

cutting up what we in the east would consider gold!
LOL

[lloyd k]

any pictures?

[72 Cheyenne K20]

Hi, need cab supports that go out to the inner rockers. Probably a foot back from the inner rockers for front and back. If I'm not making any sense, let me know and I will get you some pics.

Thanks, Scott

[t korinek]

I still have a 72 cab that I'll check out, 72 cheyenne, I believe all the floor supports are in good shape, I can get pics on wed. lloyd what parts of the cab do you need pics of in particular? Thanks, Tom

[pound41]

I need a piece Driverside. Starts 1in infront of ridge where front seat mounts. Goes in to the middle and out towards the rocker. Includes the flat part under the seat back to kneewall at rear of cab. What I essentially need would be the rear pan that is not reproduced. I am saving a blazer. Thanks

[rigon4]

looking for pass side front floor piece were the foot well starts, 10 inches out from toe board 5 inches up from bend and 6 inches back from bend. thanks

[t korinek]

Here are some pics of a 72 that will be parted, the floor is solid, rockers are rusted, it is a high hump cab, good windshield, nice passenger 72 door $150 + shipping no speaker hole.

[t korinek]

This floor has been cut out now, if any of you guys are still looking for flloor & cab pieces, the outer rockers are rusted & the rest is solid. Thanks, Tom

[pound41]

Using the pic with the seat in it I need the back part of the pan. 1/2 in or so in front of seat out to the rocker area all the way back to the welded lip. Essentially I need the area that is not availble in repos. The area the seat covers

[yote1234]

im looking for center seat belts in black??? any? im in queen creek az

[t korinek]

pics of the floor for 72 cheyenne & pound 41

[pound41]

Yes the drivers side looks good to me any idea what it would cost to ship to 22151. Thanks

[72 Cheyenne K20]

Hi, got the pics and the floor looks good. Not trying to be a pain in the a$$, but could you get a/some pics of where the cab supports meet the inner rockers. If they look like the top side I'd like to take the whole floor. How much for the whole floor? I'll check on shipping, but will probably need to make a road trip for this one. Don't want to step on any toes, want to make sure I'm first inline for this? Let me know when you get a chance.

Thanks, Scott