Need`72 HO52 U-bolt plate - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 06-09-2006, 06:23 AM

Like it says.I`m putting springs on the rear of my Highlander and discivered one u-bolt plate has one ear cracked off.I can weld,but figured I`d give finding another a shot first.Remember,this is`72-only with the inverted u-bolts with the plate and nuts under the axle and the square u-bolts.

*bisquik65* · 06-09-2006, 09:27 AM

I am getting the 72 jimmy from bills bowtie and if it has the right piece on there its yours...Thanks,Erick

shelby987 · 06-09-2006, 11:49 AM

Is the Jimmy stock? unless the rear has been upgraded, its probably got a 12bolt, not an eaton rear

**special-K** · 06-09-2006, 11:22 PM

I need the plates from a 3/4t,thanks.

**special-K** · 06-10-2006, 10:06 PM

If the Dana has the same axle diameter,they should work,too.TTT

**jamie72** · 06-11-2006, 09:14 AM

i think i might have a plate, if you still need it, any way to post pic of the one you need???
jamie

**special-K** · 06-11-2006, 09:15 AM

Yes Jamie,I need it and I`ll get a pic on here tonight,thanks.

**special-K** · 06-11-2006, 09:24 PM

Hey Jamie,My wife went out of town with the USB cable in the camcorder bag.Can`t load the picture.

**jamie72** · 06-11-2006, 10:40 PM

lol no prolbem, if you get pic send it to me i`m pretty sure i got a couple.
jamie

**special-K** · 06-14-2006, 06:28 PM

TTT.Still need this part,y`all.Jamie,I pmed Rod.

**special-K** · 06-15-2006, 10:41 PM

Jamie,no reply from Rod.I will take yours anyway.If the bolt spacing is 4" then I`n=m sure it`scompatible.Let me know how much,thanks.

06-09-2006, 06:23 AM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Need`72 HO52 U-bolt plate Like it says.I`m putting springs on the rear of my Highlander and discivered one u-bolt plate has one ear cracked off.I can weld,but figured I`d give finding another a shot first.Remember,this is`72-only with the inverted u-bolts with the plate and nuts under the axle and the square u-bolts. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-09-2006, 09:27 AM	#2
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Re: Need`72 HO52 U-bolt plate I am getting the 72 jimmy from bills bowtie and if it has the right piece on there its yours...Thanks,Erick

06-09-2006, 11:49 AM	#3
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: Need`72 HO52 U-bolt plate Is the Jimmy stock? unless the rear has been upgraded, its probably got a 12bolt, not an eaton rear __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

06-09-2006, 11:22 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Need`72 HO52 U-bolt plate I need the plates from a 3/4t,thanks. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-10-2006, 10:06 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Need`72 HO52 U-bolt plate If the Dana has the same axle diameter,they should work,too.TTT __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-11-2006, 09:14 AM	#6
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: Need`72 HO52 U-bolt plate i think i might have a plate, if you still need it, any way to post pic of the one you need??? jamie __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

06-11-2006, 09:15 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Need`72 HO52 U-bolt plate Yes Jamie,I need it and I`ll get a pic on here tonight,thanks. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-11-2006, 09:24 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Need`72 HO52 U-bolt plate Hey Jamie,My wife went out of town with the USB cable in the camcorder bag.Can`t load the picture. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-11-2006, 10:40 PM	#9
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: Need`72 HO52 U-bolt plate lol no prolbem, if you get pic send it to me i`m pretty sure i got a couple. jamie __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

06-14-2006, 06:28 PM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Need`72 HO52 U-bolt plate TTT.Still need this part,y`all.Jamie,I pmed Rod. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-15-2006, 10:41 PM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Need`72 HO52 U-bolt plate Jamie,no reply from Rod.I will take yours anyway.If the bolt spacing is 4" then I`n=m sure it`scompatible.Let me know how much,thanks. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.