Big Block Motor at the Pull-A-Part in Nashville - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 06-15-2006, 08:26 PM

I saw it out there today and thought maybe some of you guys close might be interested.

BIGCHEVYMAN · 06-15-2006, 09:57 PM

what kind of vehicle was it in? i am going there tommorow.

5150 · 06-15-2006, 10:01 PM

it wa in a 68 chevy truck, sorry guess I should have said that.

Let me know if you are going for sure I might get you to get something for me that I wasn't able to get today. Didn't have time.

meathead95 · 06-16-2006, 11:23 AM

where all the brackets and pulleys there? i may go get it tomorrow morning if so

5150 · 06-16-2006, 11:39 AM

I don't believe so Keith, or I would have grabbed them

The alt was gone but I believe the crank pulley was there.

BIGCHEVYMAN · 06-17-2006, 11:21 AM

i did not have enough time to look for those brackets. i only and 30 minutes to look before i had to go to the ball park.

i am going back monday to get a few things and i will look then.

that motor in the 68 was a big block pontiac.

give me a call when you get back from that car show.

BIGCHEVYMAN · 06-17-2006, 11:22 AM

meathead if you need any big block brackets i have a few. let me know what your looking for.

meathead95 · 06-17-2006, 01:58 PM

i have a lwp setup for my 540 bbc and i am wanting to swap it over to a swp setup

was the front end of the 68 good? i am looking for one for my 2wd blazer
thanks
keith

BIGCHEVYMAN · 06-17-2006, 02:04 PM

i really did not look at the sheetmetal that close, i was in a bit of a hurry.

BIGCHEVYMAN · 06-17-2006, 02:07 PM

those brackets i have came of a 88 454.

06-15-2006, 08:26 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Big Block Motor at the Pull-A-Part in Nashville I saw it out there today and thought maybe some of you guys close might be interested. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

06-15-2006, 09:57 PM	#2
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: Big Block Motor at the Pull-A-Part in Nashville what kind of vehicle was it in? i am going there tommorow.

06-15-2006, 10:01 PM	#3
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Big Block Motor at the Pull-A-Part in Nashville it wa in a 68 chevy truck, sorry guess I should have said that. Let me know if you are going for sure I might get you to get something for me that I wasn't able to get today. Didn't have time. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 06-15-2006 at 10:02 PM.

06-16-2006, 11:23 AM	#4
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Big Block Motor at the Pull-A-Part in Nashville where all the brackets and pulleys there? i may go get it tomorrow morning if so __________________ 72 2wd blazer 72 swb 4x4

06-16-2006, 11:39 AM	#5
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: Big Block Motor at the Pull-A-Part in Nashville I don't believe so Keith, or I would have grabbed them The alt was gone but I believe the crank pulley was there. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

06-17-2006, 11:21 AM	#6
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: Big Block Motor at the Pull-A-Part in Nashville i did not have enough time to look for those brackets. i only and 30 minutes to look before i had to go to the ball park. i am going back monday to get a few things and i will look then. that motor in the 68 was a big block pontiac. give me a call when you get back from that car show.

06-17-2006, 11:22 AM	#7
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: Big Block Motor at the Pull-A-Part in Nashville meathead if you need any big block brackets i have a few. let me know what your looking for.

06-17-2006, 01:58 PM	#8
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,440	Re: Big Block Motor at the Pull-A-Part in Nashville i have a lwp setup for my 540 bbc and i am wanting to swap it over to a swp setup was the front end of the 68 good? i am looking for one for my 2wd blazer thanks keith __________________ 72 2wd blazer 72 swb 4x4

06-17-2006, 02:04 PM	#9
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: Big Block Motor at the Pull-A-Part in Nashville i really did not look at the sheetmetal that close, i was in a bit of a hurry.

06-17-2006, 02:07 PM	#10
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: Big Block Motor at the Pull-A-Part in Nashville those brackets i have came of a 88 454.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.