|
06-22-2006, 08:47 AM
|
#1 |
|
Senior Member
Join Date: Jul 2004
Location: Clarks Hill, Indiana
Posts: 733
|
Master Cylinder ?'s
From my understanding, 4 wheel drum & front disk/rear drum have different master cylinders...
I'm looking at a long term axle conversion on my 4X4. Is there a difference between 1/2T & 3/4T MC's? |
|
|
|
06-22-2006, 09:26 AM
|
#2 |
|
Registered User
Join Date: Mar 2005
Location: Just outside Durham, NC
Posts: 894
|
Re: Master Cylinder ?'s
I just did the same swap for disc brakes, I bought an MC for my truck, it was considerably larger than my drum/drum MC, I also have a 1/2t disc/drum MC, and it also seems much smaller than the one I have in my truck. I bought mine at Napa, it was just over twice as expensive, figured it was because it was a 3/4t specific part.
If you are gonna do the swap, I can give you a run down of the problems I have run into if you need them (might help you have parts on hand before the swap to avoid the downtime I have had)
__________________
1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's  1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM! |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
