Wanted, Sun-belt steel-80's Sub-PU... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

UGLYTRUK · 06-15-2006, 08:36 AM

--------------------------------------------------------------------------------

So I need PU doors, 4 Sub doors, step bumper, front fenders w/inners, barn doors.

Mechanical; Factory tow hooks, 3 groove (rubber) torsional damper (6.2), 4 tube rad. , 16x wide wheels.

Since I live on the Canadian border, (12901) Upstate NY, I'd need these partz shipped, no rush, need to spend as little as possible. Thx, Andrew

Jonboy · 06-15-2006, 08:56 AM

FWIW, it may be cheaper to buy a whole Sub to get the parts you need. They go for next to nothing here. Check out Craigslist.com, in some of the southern cities. There seems like there is one or two a day here.

UGLYTRUK · 06-15-2006, 09:02 AM

I agree, but then I have to ship it, and I'd want to restore it... But I try not to buy rust belt vehicles, but I'm addicted. I'd need a "connection" in the south. And my wife's a pest, and we have two friendly dogs...

BIGCHEVYMAN · 06-15-2006, 05:17 PM

i have a set of factory tow hooks from a 84 chevy, i would take $25 plus shipping if your interested i can get you some pics.

wibilly · 06-23-2006, 01:45 AM

i have 2 very nice front doors and a very nice 87 gmc front clip but inner fenders are rusted could possable get them very close to you will send pics to email adress if you like

UGLYTRUK · 06-23-2006, 01:55 AM

If you're in Wisconsin, how would you get partz here? I may be interested for cheap price. Sometimes buying a la carte is pricey. My trucks are beaters, so not a priority. How bad are inners? Pix?... andrewcouchst@netzero.net

wibilly · 06-23-2006, 09:10 AM

i have a friend who has a 30' enclosed trailer who uses it to transport snowmobiels and parts to NY somwhere near the caniadian border. he makes several trips a year. i just went out to get you pics and bats died. i will get them and a price to you today rear doors arnt as nice as the fronts and fenders but will send pics of them as well. inner fenderwells are junk but outers and front doors , grill and bumper are as nice as you will find deep red int with pw and locks i wish i never pulled this moter it was probably the best truck i had! i would be interested in trading for nice 67-72 parts or bbc

06-15-2006, 08:36 AM	#1
UGLYTRUK New Member Join Date: Feb 2006 Location: Plattsburgh Posts: 20	Wanted, Sun-belt steel-80's Sub-PU... -------------------------------------------------------------------------------- So I need PU doors, 4 Sub doors, step bumper, front fenders w/inners, barn doors. Mechanical; Factory tow hooks, 3 groove (rubber) torsional damper (6.2), 4 tube rad. , 16x wide wheels. Since I live on the Canadian border, (12901) Upstate NY, I'd need these partz shipped, no rush, need to spend as little as possible. Thx, Andrew Last edited by UGLYTRUK; 06-15-2006 at 08:37 AM.

06-15-2006, 08:56 AM	#2
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: Wanted, Sun-belt steel-80's Sub-PU... FWIW, it may be cheaper to buy a whole Sub to get the parts you need. They go for next to nothing here. Check out Craigslist.com, in some of the southern cities. There seems like there is one or two a day here. __________________ 1974 Jimmy- 5.3/4L80e/NP241

06-15-2006, 09:02 AM	#3
UGLYTRUK New Member Join Date: Feb 2006 Location: Plattsburgh Posts: 20	Re: Wanted, Sun-belt steel-80's Sub-PU... I agree, but then I have to ship it, and I'd want to restore it... But I try not to buy rust belt vehicles, but I'm addicted. I'd need a "connection" in the south. And my wife's a pest, and we have two friendly dogs...

06-15-2006, 05:17 PM	#4
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: Wanted, Sun-belt steel-80's Sub-PU... i have a set of factory tow hooks from a 84 chevy, i would take $25 plus shipping if your interested i can get you some pics.

06-23-2006, 01:45 AM	#5
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: Wanted, Sun-belt steel-80's Sub-PU... i have 2 very nice front doors and a very nice 87 gmc front clip but inner fenders are rusted could possable get them very close to you will send pics to email adress if you like __________________ common sense isn't so common anymore

06-23-2006, 01:55 AM	#6
UGLYTRUK New Member Join Date: Feb 2006 Location: Plattsburgh Posts: 20	Re: Wanted, Sun-belt steel-80's Sub-PU... If you're in Wisconsin, how would you get partz here? I may be interested for cheap price. Sometimes buying a la carte is pricey. My trucks are beaters, so not a priority. How bad are inners? Pix?... andrewcouchst@netzero.net

06-23-2006, 09:10 AM	#7
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: Wanted, Sun-belt steel-80's Sub-PU... i have a friend who has a 30' enclosed trailer who uses it to transport snowmobiels and parts to NY somwhere near the caniadian border. he makes several trips a year. i just went out to get you pics and bats died. i will get them and a price to you today rear doors arnt as nice as the fronts and fenders but will send pics of them as well. inner fenderwells are junk but outers and front doors , grill and bumper are as nice as you will find deep red int with pw and locks i wish i never pulled this moter it was probably the best truck i had! i would be interested in trading for nice 67-72 parts or bbc __________________ common sense isn't so common anymore Last edited by wibilly; 06-23-2006 at 09:12 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.