67-72 Chevy accessory bracketry pics needed! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 04-08-2006, 10:49 PM

Hey guys!

I'm wanting to convert my truck from Serpentine back to V-belts. But, I need to move my alternator over to the driver's side of the truck, and I need the bracket to bolt only to the engine's heads / water pump etc, and not to the intake manifold in any way.

I think that 67-72 brackets fit the bill, so I'd like to see a few pictures of your guy's belt setups, and if it'll work like I hope it will, I'll go and find a 67-72 donor vehicle for brackets

JimKshortstep4x4 · 04-09-2006, 05:26 AM

Here you go!

Jim

72armyswbtruck · 04-09-2006, 01:08 PM

man that looks pretty

Russell · 04-09-2006, 03:37 PM

Looks exactly like what I need!

Anyone have anything closer up? I need to see how it all bolts together

Russell · 04-09-2006, 09:57 PM

TTT -- The more pics the better!

Lets see your shiny new engines, and your old greaseballs

**Yukon Jack** · 04-10-2006, 11:59 AM

Here is a pic of the alternator bracket and power steering bracket on my 70 K5, however, this is not the correct motor, it is a 400sb and the heads were drilled to accept the alternator bracket (the heads turned out to be early 60's 327 heads - I do think this is the correct brackets though.

Here is another shot of the alternator bracket.

Here is the alternator bracket that was on my 69's 307.

And here is a pic of the power steering bracket on the Blazer's 400sb - it attaches to an engine mount bolt and on the front of the block there are two bolts.

jpkerley · 06-29-2006, 10:47 AM

are you interested in selling your serpentine setup??

Russell · 06-29-2006, 06:14 PM

For those who are PMing me -- I've got a setup from a Camaro on my truck now

So, I am good to go!

Thanks anyways!

70chevyfreak · 06-29-2006, 06:37 PM

Check this thread, he has the brackets that you need.
http://67-72chevytrucks.com/vboard/s...d.php?t=203995

04-08-2006, 10:49 PM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	67-72 Chevy accessory bracketry pics needed! Hey guys! I'm wanting to convert my truck from Serpentine back to V-belts. But, I need to move my alternator over to the driver's side of the truck, and I need the bracket to bolt only to the engine's heads / water pump etc, and not to the intake manifold in any way. I think that 67-72 brackets fit the bill, so I'd like to see a few pictures of your guy's belt setups, and if it'll work like I hope it will, I'll go and find a 67-72 donor vehicle for brackets __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

04-09-2006, 05:26 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: 67-72 Chevy accessory bracketry pics needed! Here you go! Jim Attached Images

04-09-2006, 01:08 PM	#3
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: 67-72 Chevy accessory bracketry pics needed! man that looks pretty __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

04-09-2006, 03:37 PM	#4
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: 67-72 Chevy accessory bracketry pics needed! Looks exactly like what I need! Anyone have anything closer up? I need to see how it all bolts together __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

04-09-2006, 09:57 PM	#5
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: 67-72 Chevy accessory bracketry pics needed! TTT -- The more pics the better! Lets see your shiny new engines, and your old greaseballs __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

04-10-2006, 11:59 AM	#6
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: 67-72 Chevy accessory bracketry pics needed! Here is a pic of the alternator bracket and power steering bracket on my 70 K5, however, this is not the correct motor, it is a 400sb and the heads were drilled to accept the alternator bracket (the heads turned out to be early 60's 327 heads - I do think this is the correct brackets though. Here is another shot of the alternator bracket. Here is the alternator bracket that was on my 69's 307. And here is a pic of the power steering bracket on the Blazer's 400sb - it attaches to an engine mount bolt and on the front of the block there are two bolts. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14 Last edited by Yukon Jack; 04-10-2006 at 11:59 AM.

06-29-2006, 10:47 AM	#7
jpkerley Active Member Join Date: Oct 2005 Location: TENNESSEE Posts: 119	Re: 67-72 Chevy accessory bracketry pics needed! are you interested in selling your serpentine setup??

06-29-2006, 06:14 PM	#8
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: 67-72 Chevy accessory bracketry pics needed! For those who are PMing me -- I've got a setup from a Camaro on my truck now So, I am good to go! Thanks anyways! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

06-29-2006, 06:37 PM	#9
70chevyfreak Registered User Join Date: Feb 2005 Location: Holt, Missouri. Near KC Posts: 64	Re: 67-72 Chevy accessory bracketry pics needed! Check this thread, he has the brackets that you need. http://67-72chevytrucks.com/vboard/s...d.php?t=203995



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.