Started a new project .... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**FRENCHBLUE72** · 06-22-2006, 09:58 PM

Afriend of mine has a 63 chevy truck that need to be rewired so bad that its

Here are some pics of what I have pulled so far he already went

and clipped a whole crap load of wires.... I am sure there will be pleanty of ?'s to follow... Here are the pics and yes those are wire nuts!!!!!!

**FRENCHBLUE72** · 06-22-2006, 10:02 PM

More pics...

**FRENCHBLUE72** · 06-22-2006, 10:06 PM

Does anybody here have a wireing diagram for one of thses trucks???? And does anyone have 3 wires comming out of the drivers side taillight socket? and if so whats it for??

AesC10s · 06-23-2006, 05:25 PM

MAn good luck to ya, wiring can be a pain in the ass. its a surprize that his truck hasnt cuaght fire from the rats nest of a wire job.

Aaron

**FRENCHBLUE72** · 06-23-2006, 05:42 PM

I guess this is what happens when you spend mony on bling wheels and a ece lowering kit...

**FRENCHBLUE72** · 06-23-2006, 07:21 PM

Can someone tell me why there are 3 white wires comming out of where the colum harness was I cannot believe the guy cut this apart.. Can anyone tell me what color wires do what????

Chevyboy1962 · 06-24-2006, 01:42 PM

Frenchblue72,
There should be 3 wires coming from the left rear taillight socket, and 2 from the passenger side socket. 1 of the wires from the passenger side connects to the 1 of the 3 on the drivers side, the other 2 wires head up to the cab.
I'll poke my head under the '62 in a bit to see what colors go to which wires.
David

Chevyboy1962 · 06-24-2006, 01:59 PM

Here's a link to the '63 dash wiring. About middle of the diagram towards the top is the plug for the turnsignal wires.
http://pages.zdnet.com/64moneypit/id13.html

There is also a wiring diagram for the '63 V8 & inline 6 engine diagrams, as well as the rear tail light wiring diagram.
David

**FRENCHBLUE72** · 06-24-2006, 02:04 PM

Thanks you so much david I have been working on this thing all morning and the more I get into the more I find wrong looks like its gonna have a little of 72 parts mixed into it before I am done... I finished the engine compartment and taillight wireing.. I had to use 72 taillight pigtails so I will have to merge the wires under the rear of the truck..... Pics to follow..

**FRENCHBLUE72** · 06-24-2006, 03:31 PM

Engine compartment is done........

BTW that cheap azz battery has to go in the dumpster!!!!

**FRENCHBLUE72** · 07-03-2006, 09:07 AM

Hey david thanks for all the pics and help I got the truck done and it has left the building.. I just ordered a new column harness for it and get the turn signals and running lights fixed on it.. Too bad the coulumn is so hacked that it needs to be replaced........

06-22-2006, 09:58 PM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Started a new project .... Afriend of mine has a 63 chevy truck that need to be rewired so bad that its Here are some pics of what I have pulled so far he already went and clipped a whole crap load of wires.... I am sure there will be pleanty of ?'s to follow... Here are the pics and yes those are wire nuts!!!!!! Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-22-2006, 10:02 PM	#2
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Started a new project .... More pics... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-22-2006, 10:06 PM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Started a new project .... Does anybody here have a wireing diagram for one of thses trucks???? And does anyone have 3 wires comming out of the drivers side taillight socket? and if so whats it for?? Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-23-2006, 05:25 PM	#4
AesC10s Chevy truck addict Join Date: Apr 2005 Location: Thornton Colorado Posts: 825	Re: Started a new project .... MAn good luck to ya, wiring can be a pain in the ass. its a surprize that his truck hasnt cuaght fire from the rats nest of a wire job. Aaron

06-23-2006, 05:42 PM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Started a new project .... I guess this is what happens when you spend mony on bling wheels and a ece lowering kit... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-23-2006, 07:21 PM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Started a new project .... Can someone tell me why there are 3 white wires comming out of where the colum harness was I cannot believe the guy cut this apart.. Can anyone tell me what color wires do what???? Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-24-2006, 01:42 PM	#7
Chevyboy1962 C10 now is a GMC Join Date: Jun 2003 Location: Modesto, Ca Posts: 740	Re: Started a new project .... Frenchblue72, There should be 3 wires coming from the left rear taillight socket, and 2 from the passenger side socket. 1 of the wires from the passenger side connects to the 1 of the 3 on the drivers side, the other 2 wires head up to the cab. I'll poke my head under the '62 in a bit to see what colors go to which wires. David __________________ 1962 C10 swb fleetside, big window, custom cab 350/TH350 combo...Hot Rod 1963 C10 lwb fleetside, small window 230/4 speed...Blvd Cruiser 1931 Ford 5 window coupe (soon to be Hot Rod)... Father & Son project Last edited by Chevyboy1962; 06-24-2006 at 01:42 PM.*

06-24-2006, 01:59 PM	#8
Chevyboy1962 C10 now is a GMC Join Date: Jun 2003 Location: Modesto, Ca Posts: 740	Re: Started a new project .... Here's a link to the '63 dash wiring. About middle of the diagram towards the top is the plug for the turnsignal wires. http://pages.zdnet.com/64moneypit/id13.html There is also a wiring diagram for the '63 V8 & inline 6 engine diagrams, as well as the rear tail light wiring diagram. David __________________ 1962 C10 swb fleetside, big window, custom cab 350/TH350 combo...Hot Rod 1963 C10 lwb fleetside, small window 230/4 speed...Blvd Cruiser *1931 Ford 5 window coupe (soon to be Hot Rod)... Father & Son project

06-24-2006, 02:04 PM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Started a new project .... Thanks you so much david I have been working on this thing all morning and the more I get into the more I find wrong looks like its gonna have a little of 72 parts mixed into it before I am done... I finished the engine compartment and taillight wireing.. I had to use 72 taillight pigtails so I will have to merge the wires under the rear of the truck..... Pics to follow.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-24-2006, 03:31 PM	#10
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Started a new project .... Engine compartment is done........ BTW that cheap azz battery has to go in the dumpster!!!! Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

07-03-2006, 09:07 AM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: Started a new project .... Hey david thanks for all the pics and help I got the truck done and it has left the building.. I just ordered a new column harness for it and get the turn signals and running lights fixed on it.. Too bad the coulumn is so hacked that it needs to be replaced........ __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.