After market tach...question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ronr · 07-09-2006, 04:59 PM

I want to hook up a sun super tach to my 350 which has an accel hei
distributor. Do I need a special connector at the distributor? And exactly which port on the distributor does it go to(a description would be greatly appreciated) Thanks Ron

Igotachevyor2 · 07-09-2006, 05:21 PM

hope this helps

71chevytruckguy · 07-09-2006, 05:39 PM

it should say TACH above the connecion pictured above. chris.

*1972C10* · 07-09-2006, 05:57 PM

You can use a regular female spade connector but it wont retain itself as well as one of these http://www.ecklers.com/product.asp?p...dept%5Fid=1783

And in case you need the bat side http://www.ecklers.com/product.asp?p...dept%5Fid=1783

kelsfine69 · 07-09-2006, 06:46 PM

I have used one for years and never had a problem, spade connector that is.

Longhorn Man · 07-09-2006, 07:10 PM

same here, I've ran a spaid connector for almost a decade with zero issues.

Igotachevyor2 · 07-09-2006, 07:55 PM

me too

ronr · 07-09-2006, 09:08 PM

Thanks to all, aint this forum great..........

07-09-2006, 04:59 PM	#1
ronr Registered User Join Date: Apr 2006 Location: Grants Pass, Ore Posts: 22	After market tach...question I want to hook up a sun super tach to my 350 which has an accel hei distributor. Do I need a special connector at the distributor? And exactly which port on the distributor does it go to(a description would be greatly appreciated) Thanks Ron

07-09-2006, 05:21 PM	#2
Igotachevyor2 Apache Club Join Date: Jan 2006 Location: Goodlettsville,Tn. Posts: 1,294	Re: After market tach...question hope this helps __________________ 58 CHEVY APACHE I 74 CHEVY C-10 I 78 K-10 donor truck I 89 SONOMA My Trucks Apache Sitting Idle MySpace Project Dad's Truck (74 C-10 to K-10 conversion) .

07-09-2006, 05:39 PM	#3
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: After market tach...question it should say TACH above the connecion pictured above. chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

07-09-2006, 05:57 PM	#4
1972C10 Account Suspended Join Date: Dec 2003 Location: Texas Posts: 2,686	Re: After market tach...question You can use a regular female spade connector but it wont retain itself as well as one of these http://www.ecklers.com/product.asp?p...dept%5Fid=1783 And in case you need the bat side http://www.ecklers.com/product.asp?p...dept%5Fid=1783

07-09-2006, 06:46 PM	#5
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: After market tach...question I have used one for years and never had a problem, spade connector that is. __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

07-09-2006, 07:10 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: After market tach...question same here, I've ran a spaid connector for almost a decade with zero issues.

07-09-2006, 07:55 PM	#7
Igotachevyor2 Apache Club Join Date: Jan 2006 Location: Goodlettsville,Tn. Posts: 1,294	Re: After market tach...question me too __________________ 58 CHEVY APACHE I 74 CHEVY C-10 I 78 K-10 donor truck I 89 SONOMA My Trucks Apache Sitting Idle MySpace Project Dad's Truck (74 C-10 to K-10 conversion) .

07-09-2006, 09:08 PM	#8
ronr Registered User Join Date: Apr 2006 Location: Grants Pass, Ore Posts: 22	Re: After market tach...question Thanks to all, aint this forum great..........



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.