Some stuff for sale - Pa - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Burnsman · 07-21-2006, 08:26 PM

Nitrous activation micro switch $10 shipped, extra set of engine cleaning brushe $10 shipped, power steering box/pump from mid 70's 4x4 (should fit our trucks). Pitman arm is for a 4-6" lift. $80 shipped. 3 sets of dana 44 ft axles. (2) of them are missing the long axles. One has a new set of hubs. I think 2 are 3/4 ton, 1 is 1/2 ton. $150 for all 3. 68-72 long bed (fleetside). This bed was from Texas. Very nice. Nice floor. No rust. Straight sides. Straight front panel. No gate. Only flaw is a few pits on the floor towards the front. I can try to get better pics this weekend as it is buried. I've had this for a long time. It's like losing an old friend. I'm going to put it on ebay real soon, so if someone is interested, let me know quick-like. $1000.

Burnsman · 07-21-2006, 08:27 PM

bed

LUV2XCLR8 · 07-21-2006, 09:29 PM

WoWsers, man that is one cherry OE bed, good luck

Ric2L · 07-21-2006, 10:51 PM

im interested in the bed, woulden't happen to be comming to the carlisle truck show in 2 weeks would you, if so i would buy the bed from you, i just have no way of hauling it to the harrisburg area.

Burnsman · 07-22-2006, 08:12 AM

Sorry. Not going to Carlisle. Always wanted to, but just haven't been able to find the time. Brian

Joe67 · 07-22-2006, 09:02 AM

Quote:

Originally Posted by Ric2L

im interested in the bed, woulden't happen to be comming to the carlisle truck show in 2 weeks would you, if so i would buy the bed from you, i just have no way of hauling it to the harrisburg area.

Maybe rent a trailer?

A few years back, I hauled an empty trailer to the Carlisle show from Detroit. I picked up a 69 SWB rolling chassis from a board member on the way

**special-K** · 07-22-2006, 09:35 AM

Ahh man...why did I look???I could buy this and sell one or two I have.Well,I am officially hesitating,lol.

c10crazy · 07-22-2006, 10:48 AM

Quote:

Originally Posted by Ric2L

im interested in the bed, woulden't happen to be comming to the carlisle truck show in 2 weeks would you, if so i would buy the bed from you, i just have no way of hauling it to the harrisburg area.

Ric2L- if you have a pickup truck you can easily get it. My buddy takes a couple old blankets and flips them over his bed rails and takes the other bed he's picking up and flips it upside down right on top of the rails and then uses ratchet tie-downs to secure it. Works like a charm. Just take it easy when driving and you should be fine!. That is a nice bed!

68haywagon · 07-22-2006, 11:04 AM

I want the bed too

Mike

Ric2L · 07-22-2006, 04:15 PM

i going to check the truck show in carlisle aug 4, for a bed, i'm only 5 miles from there, if i cant find a decent bed there, and you havent sold yours yet
i will come and get it. would appricate it if you let me know if you sell it befor then.

**special-K** · 07-23-2006, 07:10 AM

I am interested,would like more pics.When you say pits,you don`t mean teeny holes,right?I know you know your stuff,just making sure on this.I`ve seen alot of people call pinholes pits.Thanks

Burnsman · 07-23-2006, 07:55 AM

Tim, no holes. Just some pits. I am going to try to get some better pics today as yesterday we had some serious rain. Brian

Burnsman · 07-23-2006, 09:42 AM

Tim, may also trade for a shortbed (up/down). Have any nice ones?

Burnsman · 07-23-2006, 10:20 PM

More pics of bed. Pits are just towrds the front parts of the bed (maybe a ft or two back from the front panel). A few dime size dings here and there. Has a few layers of paint. Very solid. Let me know if anyone needs any more pics of the bed. I also have an arizona bed in about the same shape. I will be posting some more sheetmetal for sale. I'm cleaning out my stash! The only thing I need is a good 6' bed.

Burnsman · 07-23-2006, 10:21 PM

One more. Thie pic shows a few extra holes someone drilled on the pass side towards the front. Not sure why. I was going to weld them shut.

**special-K** · 07-24-2006, 11:32 PM

It`s a real nice bed,worth the price,IMO.I do think I`ll pass,for other reasons.I`llkeep you in mind for shortbed stuff.I have alot of long-term projects,like too many.I have 1`67 and 1 later bedside from Cal.I`m picking up a complete`67 bed and a decent floor soon.I hope all that is as good as I think(from S/E).I need to do some deciding on which way I`m going before knowing what I`ll sell.

Burnsman · 07-25-2006, 07:28 AM

Tim, totally understand. I'm getting out of the 4x4's all together. Just sticking with my 2wd's. That will eliminate a ton of spare parts. If you do decide to sell a 6' bed, let me know. I'm officially on the hunt. Brian

**special-K** · 07-25-2006, 08:26 AM

Will do.

07-21-2006, 08:26 PM	#1
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Some stuff for sale - Pa Nitrous activation micro switch $10 shipped, extra set of engine cleaning brushe $10 shipped, power steering box/pump from mid 70's 4x4 (should fit our trucks). Pitman arm is for a 4-6" lift. $80 shipped. 3 sets of dana 44 ft axles. (2) of them are missing the long axles. One has a new set of hubs. I think 2 are 3/4 ton, 1 is 1/2 ton. $150 for all 3. 68-72 long bed (fleetside). This bed was from Texas. Very nice. Nice floor. No rust. Straight sides. Straight front panel. No gate. Only flaw is a few pits on the floor towards the front. I can try to get better pics this weekend as it is buried. I've had this for a long time. It's like losing an old friend. I'm going to put it on ebay real soon, so if someone is interested, let me know quick-like. $1000. Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

07-21-2006, 08:27 PM	#2
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Some stuff for sale - Pa bed Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

07-21-2006, 09:29 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: Some stuff for sale - Pa WoWsers, man that is one cherry OE bed, good luck __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-21-2006, 10:51 PM	#4
Ric2L Junior Member Join Date: Apr 2005 Location: Mechanicsburg PA Posts: 22	Re: Some stuff for sale - Pa im interested in the bed, woulden't happen to be comming to the carlisle truck show in 2 weeks would you, if so i would buy the bed from you, i just have no way of hauling it to the harrisburg area.

07-22-2006, 08:12 AM	#5
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Some stuff for sale - Pa Sorry. Not going to Carlisle. Always wanted to, but just haven't been able to find the time. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

07-22-2006, 09:35 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Some stuff for sale - Pa Ahh man...why did I look???I could buy this and sell one or two I have.Well,I am officially hesitating,lol. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-22-2006, 11:04 AM	#9
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	Re: Some stuff for sale - Pa I want the bed too Mike __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

07-22-2006, 04:15 PM	#10
Ric2L Junior Member Join Date: Apr 2005 Location: Mechanicsburg PA Posts: 22	Re: Some stuff for sale - Pa i going to check the truck show in carlisle aug 4, for a bed, i'm only 5 miles from there, if i cant find a decent bed there, and you havent sold yours yet i will come and get it. would appricate it if you let me know if you sell it befor then.

07-23-2006, 07:10 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Some stuff for sale - Pa I am interested,would like more pics.When you say pits,you don`t mean teeny holes,right?I know you know your stuff,just making sure on this.I`ve seen alot of people call pinholes pits.Thanks __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-23-2006, 07:55 AM	#12
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Some stuff for sale - Pa Tim, no holes. Just some pits. I am going to try to get some better pics today as yesterday we had some serious rain. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

07-23-2006, 09:42 AM	#13
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Some stuff for sale - Pa Tim, may also trade for a shortbed (up/down). Have any nice ones? __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

07-23-2006, 10:20 PM	#14
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Some stuff for sale - Pa More pics of bed. Pits are just towrds the front parts of the bed (maybe a ft or two back from the front panel). A few dime size dings here and there. Has a few layers of paint. Very solid. Let me know if anyone needs any more pics of the bed. I also have an arizona bed in about the same shape. I will be posting some more sheetmetal for sale. I'm cleaning out my stash! The only thing I need is a good 6' bed. Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

07-23-2006, 10:21 PM	#15
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Some stuff for sale - Pa One more. Thie pic shows a few extra holes someone drilled on the pass side towards the front. Not sure why. I was going to weld them shut. Attached Images __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461 Last edited by Burnsman; 07-23-2006 at 10:22 PM.

07-24-2006, 11:32 PM	#16
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Some stuff for sale - Pa It`s a real nice bed,worth the price,IMO.I do think I`ll pass,for other reasons.I`llkeep you in mind for shortbed stuff.I have alot of long-term projects,like too many.I have 1`67 and 1 later bedside from Cal.I`m picking up a complete`67 bed and a decent floor soon.I hope all that is as good as I think(from S/E).I need to do some deciding on which way I`m going before knowing what I`ll sell. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-25-2006, 07:28 AM	#17
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	Re: Some stuff for sale - Pa Tim, totally understand. I'm getting out of the 4x4's all together. Just sticking with my 2wd's. That will eliminate a ton of spare parts. If you do decide to sell a 6' bed, let me know. I'm officially on the hunt. Brian __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461



Register or Log In To remove these advertisements.

07-25-2006, 08:26 AM	#18
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Some stuff for sale - Pa Will do. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Register or Log In To remove these advertisements.