4/S=steering wheel, holley carb, HEI's,flex fan. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 01-23-2006, 02:28 PM

Stainless flex fan with 2"spacer & bolts. $20. 18" Diameter. clean!

SBC or BBC, HEI distributors. Several here, $35 complete ready to drop in with good vacuum canister. $30 complete with bad vacuum canister. $25 for one with no cap/coil. these are all the preferred NON-computer type. EVERYONE of these distributors were just tested good.

Holley carb, list #84010, Model 4010 series. 600 CFM vacuum.$35 . Square flange, but I have an adapter if needed for $5 to buyer. was on a stock 305 Chevy. lots of vacuum hook-ups. No idea if it works, but these type are easy to disassemble and work on. not many parts in them either. made like the old Autolite carbs? takea chance for $35.

4 spoke truck steering wheel from 90's. $35 , 15" diameter. It's not the fancy one with fake stitching. Good shape. not soggy on the top.

Prices do not include the shipping. I will use US mail on lighter items cause it's easier for me.

reply here on the forum is OK and not PM's , BUT you'll get better response from me by emailing me at all4trux@snip.net (proper subject in subject line please) and its first come first serve and I don't check PM's daily. I can provide pics from that email also. thanx , DAVE.

**crossy** · 07-25-2006, 09:10 PM

bump

01-23-2006, 02:28 PM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	4/S=steering wheel, holley carb, HEI's,flex fan. Stainless flex fan with 2"spacer & bolts. $20. 18" Diameter. clean! SBC or BBC, HEI distributors. Several here, $35 complete ready to drop in with good vacuum canister. $30 complete with bad vacuum canister. $25 for one with no cap/coil. these are all the preferred NON-computer type. EVERYONE of these distributors were just tested good. Holley carb, list #84010, Model 4010 series. 600 CFM vacuum.$35 . Square flange, but I have an adapter if needed for $5 to buyer. was on a stock 305 Chevy. lots of vacuum hook-ups. No idea if it works, but these type are easy to disassemble and work on. not many parts in them either. made like the old Autolite carbs? takea chance for $35. 4 spoke truck steering wheel from 90's. $35 , 15" diameter. It's not the fancy one with fake stitching. Good shape. not soggy on the top. Prices do not include the shipping. I will use US mail on lighter items cause it's easier for me. reply here on the forum is OK and not PM's , BUT you'll get better response from me by emailing me at all4trux@snip.net (proper subject in subject line please) and its first come first serve and I don't check PM's daily. I can provide pics from that email also. thanx , DAVE. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. Last edited by crossy; 01-23-2006 at 02:29 PM.

07-25-2006, 09:10 PM	#2
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Re: 4/S=steering wheel, holley carb, HEI's,flex fan. bump __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.