84 Tranny question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

krue · 07-26-2006, 08:27 PM

My brother is piecing together a 84 p/u that the po removed the engine/tranny. Looking at the driveshaft and shifter on the column we are assuming it had a TH350 (only 3 positions on the shifter and the shaft fit in my bro's 700r4). My bro put a 700R4 out of an early 80's Caprice in it. The truck had a plug on the wiring harness that plugged into the tranny on the drivers side. After reading a thread here I think the tranny it had was a TH350C. If that's the case, will the same circuit that operated the t/c lock on the 350c work on the 700?

**BOSS** · 07-26-2006, 08:37 PM

I believe so but better get more responces then me.....lol

MylilBowTie · 07-27-2006, 01:21 PM

Im not sure if it will work or not. I would check the pin placement of the transmission plug and the wire connnector.

Jonboy · 07-27-2006, 02:05 PM

Yes, it should work just fine.

HOGDADDY · 07-27-2006, 08:13 PM

I would not think it would be the same and if your wrong you might burn up the switches inside tranny.

krue · 07-27-2006, 08:25 PM

The wiring harness is identical to the one in the 83 parts truck (which had a 700r4 in it) so we're hoping we're good to go.

07-26-2006, 08:27 PM	#1
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	84 Tranny question My brother is piecing together a 84 p/u that the po removed the engine/tranny. Looking at the driveshaft and shifter on the column we are assuming it had a TH350 (only 3 positions on the shifter and the shaft fit in my bro's 700r4). My bro put a 700R4 out of an early 80's Caprice in it. The truck had a plug on the wiring harness that plugged into the tranny on the drivers side. After reading a thread here I think the tranny it had was a TH350C. If that's the case, will the same circuit that operated the t/c lock on the 350c work on the 700? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

07-26-2006, 08:37 PM	#2
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	Re: 84 Tranny question I believe so but better get more responces then me.....lol __________________ Support our site Norwood Survivor

07-27-2006, 01:21 PM	#3
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Re: 84 Tranny question Im not sure if it will work or not. I would check the pin placement of the transmission plug and the wire connnector. __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

07-27-2006, 02:05 PM	#4
Jonboy Slots go on anything! Join Date: May 2003 Location: Richardson, TX Posts: 5,957	Re: 84 Tranny question Yes, it should work just fine. __________________ 1974 Jimmy- 5.3/4L80e/NP241

07-27-2006, 08:13 PM	#5
HOGDADDY Registered User Join Date: Jul 2006 Location: Alabama Posts: 661	Re: 84 Tranny question I would not think it would be the same and if your wrong you might burn up the switches inside tranny.

07-27-2006, 08:25 PM	#6
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: 84 Tranny question The wiring harness is identical to the one in the 83 parts truck (which had a 700r4 in it) so we're hoping we're good to go. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.