Thru-the-Body Exhaust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NitroMike · 07-31-2006, 06:13 PM

I've seen a few trucks where the exhaust has been run through a chrome port/opening in the bed side just forward of the rear wheel openings. Anybody know of a vendor for these?

Thanks

TugOwar · 07-31-2006, 07:12 PM

hmm, never seen that. Or never noticed it if I did see it. Sounds interesting though.

**Classic Heartbeat** · 07-31-2006, 07:16 PM

Are you sure that you are not talking about the half moon foot steps that were a dealer option? WES www.ClassicHeartbeat.com

Sweet72 · 07-31-2006, 07:53 PM

I've seen pics of our trucks with holes cut in the lower bedside (forward or the back wheels) for chrome exhaust tips, on lowered trucks. Maybe for better ground clearance. Never saw chrome "port holes" though.

WRMZ71 · 07-31-2006, 08:07 PM

I swear to god they did this on Trucks one time. I've seen it done and I want to do the same thing but I can't find any info on it anywhere. You don't just cut a hole and put a tip throug it. It's a chromed piece that is pretty much flush with the side of the bed and attached to it. Its some type of material that doesn't discolor with the heat. Nitro if you find it you gotta hit me up brother!!

1969K10 · 07-31-2006, 08:17 PM

There is a 71/72 blazer running around town that has that set-up, so you're not crazy on that account. if I get a chance, i'll see if i can find out where he got them.

BowTieOgre · 07-31-2006, 08:20 PM

I think I may have seen them do that on Trucks! when Stacey David was hosting.

67ChevyRedneck · 07-31-2006, 08:22 PM

I've seen them as well, I think there was even a couple trucks posted on here that have them. Not my cup of tea, buy they are out there.

Sgt.Booya · 07-31-2006, 08:35 PM

Like this one? I think it looks cool as well.

He is a member on this site. His handle is, "Barepaint". Maybe he'll chime in or you could send him a PM? Let us all know if you find out.

rauto13 · 07-31-2006, 08:39 PM

You might be able to use boat exhaust tips for through hull exhaust.

Here is the first place I found them.

http://www.rexmar.com/page230.html

I know there are all different styles available.

*FormerMember* · 07-31-2006, 08:41 PM

Quote:

Originally Posted by Sgt.Booya

Like this one? I think it looks cool as well.

He is a member on this site. His handle is, "Barepaint". Maybe he'll chime in or you could send him a PM? Let us all know if you find out.

That looks like a step...

I saw the one with Stacey. He cut a piece of sheet metal and had it chromed to fit. You could also go with powder coating.

The exhaust isn't really that hot back there, so the chrome should last a while.

rauto13 · 07-31-2006, 08:50 PM

pic of flush mount tip & website

http://www.eddiemarine.com/cart/deta...&CategoryID=30

corn · 07-31-2006, 08:56 PM

Yea, they did it on trucks to the red dodge truck. I cant remember the brand it was though.

NitroMike · 07-31-2006, 09:10 PM

This is one that I have seen. Hope you can make it out.

LUV2XCLR8 · 07-31-2006, 09:14 PM

Pic SGT. posted is the aluminum steps, the pic Nitro just posted has
them, sorry bud your pic is too small to make them out,

link 13

NitroMike · 08-01-2006, 07:54 AM

Here's the one I've found so far from Stylin Concepts.

http://www.stylinconcepts.com/parts....rtfamilyid/666

Seen any others??

Orange · 08-01-2006, 04:58 PM

I remember seeing them on these quite a bit:

corn · 08-01-2006, 11:34 PM

Quote:

Originally Posted by NitroMike

Here's the one I've found so far from Stylin Concepts.

http://www.stylinconcepts.com/parts....rtfamilyid/666

Seen any others??

Those are the ones I was thinking of. They are the ones from TrucksTV anyway...

dallas71 · 08-02-2006, 03:25 PM

Check out this link
http://www.persh.org/Pickup/body1.htm

To get the exhaust pipes through his cool roll pan, Richard Twiddy used the exhaust bezels from an early Mustang. It gives it a nice finished look. These are available for about $15 each from CJ Pony Parts Inc., 7481 Allentown Blvd., Harrisburg, PA 17112. 1-800-888-6473

07-31-2006, 06:13 PM	#1
NitroMike Active Member Join Date: Dec 2005 Location: Bethlehem, PA Posts: 346	Thru-the-Body Exhaust I've seen a few trucks where the exhaust has been run through a chrome port/opening in the bed side just forward of the rear wheel openings. Anybody know of a vendor for these? Thanks __________________ The older I get, the faster I was!!

07-31-2006, 07:12 PM	#2
TugOwar Registered User Join Date: Sep 2004 Location: Pleasanton, TX Posts: 1,723	Re: Thru-the-Body Exhaust hmm, never seen that. Or never noticed it if I did see it. Sounds interesting though.

07-31-2006, 07:16 PM	#3
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,770	Re: Thru-the-Body Exhaust Are you sure that you are not talking about the half moon foot steps that were a dealer option? WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

07-31-2006, 07:53 PM	#4
Sweet72 Registered User Join Date: Nov 2003 Location: Alexandria, VA Posts: 1,534	Re: Thru-the-Body Exhaust I've seen pics of our trucks with holes cut in the lower bedside (forward or the back wheels) for chrome exhaust tips, on lowered trucks. Maybe for better ground clearance. Never saw chrome "port holes" though. __________________ '72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction.

07-31-2006, 08:07 PM	#5
WRMZ71 Cause the Chicks DIG IT!! Join Date: Nov 2003 Location: Beaufort SC Posts: 509	Re: Thru-the-Body Exhaust I swear to god they did this on Trucks one time. I've seen it done and I want to do the same thing but I can't find any info on it anywhere. You don't just cut a hole and put a tip throug it. It's a chromed piece that is pretty much flush with the side of the bed and attached to it. Its some type of material that doesn't discolor with the heat. Nitro if you find it you gotta hit me up brother!!

07-31-2006, 08:17 PM	#6
1969K10 Senior Member Join Date: Jul 2004 Location: Clarks Hill, Indiana Posts: 733	Re: Thru-the-Body Exhaust There is a 71/72 blazer running around town that has that set-up, so you're not crazy on that account. if I get a chance, i'll see if i can find out where he got them.

07-31-2006, 08:20 PM	#7
BowTieOgre Registered User Join Date: Mar 2006 Location: Pensacola, FL Posts: 1,461	Re: Thru-the-Body Exhaust I think I may have seen them do that on Trucks! when Stacey David was hosting. __________________ 1986 C10 - LWB, 305/700r4, posi, vortec heads

07-31-2006, 08:22 PM	#8
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Thru-the-Body Exhaust I've seen them as well, I think there was even a couple trucks posted on here that have them. Not my cup of tea, buy they are out there. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-31-2006, 08:35 PM	#9
Sgt.Booya Registered User Join Date: Apr 2006 Location: Ontario, Canada Posts: 75	Re: Thru-the-Body Exhaust Like this one? I think it looks cool as well. He is a member on this site. His handle is, "Barepaint". Maybe he'll chime in or you could send him a PM? Let us all know if you find out. __________________ If you keep and open mind you never know what might drop in. 1970 Chev C10 SWB, "250 turbo thrift"

07-31-2006, 08:39 PM	#10
rauto13 saving one more Join Date: Sep 2005 Location: Pryor Creek, Oklahoma Posts: 3,066	Re: Thru-the-Body Exhaust You might be able to use boat exhaust tips for through hull exhaust. Here is the first place I found them. http://www.rexmar.com/page230.html I know there are all different styles available. Attached Images __________________ 72 Chevy longbed - now for parts 69 Chevy short fleet - needing some love 70 RS Camaro - needing more love driver - 96 GMC X-cab Last edited by rauto13; 07-31-2006 at 08:46 PM.

07-31-2006, 08:50 PM	#12
rauto13 saving one more Join Date: Sep 2005 Location: Pryor Creek, Oklahoma Posts: 3,066	Re: Thru-the-Body Exhaust pic of flush mount tip & website http://www.eddiemarine.com/cart/deta...&CategoryID=30 Attached Images __________________ 72 Chevy longbed - now for parts 69 Chevy short fleet - needing some love 70 RS Camaro - needing more love driver - 96 GMC X-cab

07-31-2006, 08:56 PM	#13
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Thru-the-Body Exhaust Yea, they did it on trucks to the red dodge truck. I cant remember the brand it was though.

07-31-2006, 09:10 PM	#14
NitroMike Active Member Join Date: Dec 2005 Location: Bethlehem, PA Posts: 346	Re: Thru-the-Body Exhaust This is one that I have seen. Hope you can make it out. __________________ The older I get, the faster I was!!

07-31-2006, 09:14 PM	#15
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: Thru-the-Body Exhaust Pic SGT. posted is the aluminum steps, the pic Nitro just posted has them, sorry bud your pic is too small to make them out, link 13 __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 07-31-2006 at 09:14 PM.

08-01-2006, 07:54 AM	#16
NitroMike Active Member Join Date: Dec 2005 Location: Bethlehem, PA Posts: 346	Re: Thru-the-Body Exhaust Here's the one I've found so far from Stylin Concepts. http://www.stylinconcepts.com/parts....rtfamilyid/666 Seen any others?? __________________ The older I get, the faster I was!!



Register or Log In To remove these advertisements.

08-01-2006, 04:58 PM	#17
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Thru-the-Body Exhaust I remember seeing them on these quite a bit: __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index.

08-02-2006, 03:25 PM	#19
dallas71 Registered User Join Date: Mar 2004 Location: Corinth,TX Posts: 444	Re: Thru-the-Body Exhaust Check out this link http://www.persh.org/Pickup/body1.htm To get the exhaust pipes through his cool roll pan, Richard Twiddy used the exhaust bezels from an early Mustang. It gives it a nice finished look. These are available for about $15 each from CJ Pony Parts Inc., 7481 Allentown Blvd., Harrisburg, PA 17112. 1-800-888-6473 __________________ My 1966 LWB Truck My 1966 SWB Truck Last edited by dallas71; 08-02-2006 at 03:28 PM.

Register or Log In To remove these advertisements.