Bidding on 06 GMC on Wednesday (Feedback please) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jasonrog · 08-08-2006, 02:57 AM

I have convinced myself to put my 71 lwb body onto a newer 4x4 frame. I have found a 2006 GMC with 5.3 engine. The truck has been rolled. As long as the frame was in good shape, I don't see why this would not be possible. Here is a pic of the truck. The truck can be viewed here. http://www.mpi.mb.ca/salvage/SlvgItm...660&itemnm=172

I know this will involve shortening the frame, and a considerable amount of work. I thing the pay offs will be well worth it.

I will be bidding on this Wednesday. If anyone has any last minute comments as to why or why not, please don't hesitate to reply.

I am hoping to get this for under $2500.

Thanks
Jason

vtblazer · 08-08-2006, 06:55 AM

Hope you get it.

I'm considering doing the same thing with a blazer body.

Keep us posted.

Hoods69BadBowTie · 08-10-2006, 01:13 AM

Good luck with the bidding and the project. It will be alot of work but it should be able to work and it should be way kool when its all done. Definantly post some pics and updates.
-Later

jasonrog · 08-10-2006, 02:02 AM

The truck went for $4700. I was prepared to pay $2300. Oh well. I will keep my eyes open for a 96+ GM 4x4. The search continues...

08-08-2006, 02:57 AM	#1
jasonrog Registered User Join Date: Sep 2000 Location: Winnipeg, Manitoba Canada Posts: 248	Bidding on 06 GMC on Wednesday (Feedback please) I have convinced myself to put my 71 lwb body onto a newer 4x4 frame. I have found a 2006 GMC with 5.3 engine. The truck has been rolled. As long as the frame was in good shape, I don't see why this would not be possible. Here is a pic of the truck. The truck can be viewed here. http://www.mpi.mb.ca/salvage/SlvgItm...660&itemnm=172 I know this will involve shortening the frame, and a considerable amount of work. I thing the pay offs will be well worth it. I will be bidding on this Wednesday. If anyone has any last minute comments as to why or why not, please don't hesitate to reply. I am hoping to get this for under $2500. Thanks Jason

08-08-2006, 06:55 AM	#2
vtblazer Registered User Join Date: Oct 2003 Location: Central Vermont Posts: 8,537	Re: Bidding on 06 GMC on Wednesday (Feedback please) Hope you get it. I'm considering doing the same thing with a blazer body. Keep us posted.

08-10-2006, 01:13 AM	#3
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: Bidding on 06 GMC on Wednesday (Feedback please) Good luck with the bidding and the project. It will be alot of work but it should be able to work and it should be way kool when its all done. Definantly post some pics and updates. -Later __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

08-10-2006, 02:02 AM	#4
jasonrog Registered User Join Date: Sep 2000 Location: Winnipeg, Manitoba Canada Posts: 248	Re: Bidding on 06 GMC on Wednesday (Feedback please) The truck went for $4700. I was prepared to pay $2300. Oh well. I will keep my eyes open for a 96+ GM 4x4. The search continues...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.