Are chevrolet and GMC parts completely interchangeable? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PonyX · 08-11-2006, 11:44 AM

I realize some parts are interchangeable. Is everything the same on these trucks. For example can I buy a front brake kit for a C series chev and put it on my GMC. I was looking at the Classic Industries catalogues and the pictures of the parts look like the ones in my truck.

Longhorn Man · 08-11-2006, 11:56 AM

Pretty much.
The only thing that will throw you for a loop, is the front fenders.
inn69, chevy went to a new fender... GMC kept the 68 style, and ran it untill 72. The grill is pbviously not the same as chevy, and the 68 fenders are needed to run it.
Other than that, it's prettymuch all cosmetic stuff and little details. Other than that, the GMC is the same as the chevy.

Well, the GMC had a v-6 avalible that chevy didn't get...

PonyX · 08-11-2006, 12:05 PM

Hey thanks for the info.

bryanw1968 · 08-11-2006, 01:46 PM

Did GMC 1/2 ton 2 wheel drive trucks come with springs or leafs?
I thought they came with leafs as the GMC used to be considered more of a work truck?

PonyX · 08-11-2006, 02:14 PM

Mine has leaf springs. I have not been under the truck yet to have a good look around. I had heard the same kind of think about GMC being more of a work truck.

67ChevyRedneck · 08-11-2006, 02:19 PM

In GENERAL Chevy 1/2 ton 2wd trucks came with all coils and GMC trucks came with all Leafs... BUT you could order either truck with either set-up or a mix of the two. For example, I've seen a lot of chevys with leaf rears and coil fronts, and I've seen a lot of GMCs (actually most of the GMC's I have seen) have had the leaf rear with the coil front. I have a coil suspension off a 71 GMC under my 67 Chevy

Does your truck have leafs in the front too?

Gary · 08-11-2006, 02:45 PM

Leaf rear/coil front on my 72 GMC. I put new coils up front, leafs in back to lower it.

chevy_fatman · 08-11-2006, 04:36 PM

Quote:

Originally Posted by 67ChevyRedneck

... BUT you could order either truck with either set-up or a mix of the two.

Please elaborate, how do you you get a mix of coils and leafs in the back? you either get leafs or coils, you can't get a mix of the two as you state it above, all these trucks came with coil springs on the front suspension, wheather it was a 1/2 ton or a 1 ton, Chevy or GMC......

jacobs · 08-11-2006, 04:57 PM

Quote:

Originally Posted by chevy_fatman

Please elaborate, how do you you get a mix of coils and leafs in the back? you either get leafs or coils, you can't get a mix of the two as you state it above, all these trucks came with coil springs on the front suspension, wheather it was a 1/2 ton or a 1 ton, Chevy or GMC......

If you have coil springs with factory overload springs, the overload springs are a single leaf leaf spring.

Longhorn Man · 08-11-2006, 05:30 PM

4 wheel drive had leafs all around. Period
2 wheel drive, 10 - 30, had coils up front. Period.
Both of those are for Chevy, and GMC.
Generally, GMC had leafs standard in back.
However, sometimes there were coils oin back on GMC trucks, and it had not been specified on the SPID. I have personally seen this on a small block LWB 1/2 ton, a V-6 SWB 1/2 ton, and on an inline LWB 1/2 ton... all 3 were 1969 models.

08-11-2006, 11:44 AM	#1
PonyX Registered User Join Date: Aug 2006 Location: Calgary Posts: 17	Are chevrolet and GMC parts completely interchangeable? I realize some parts are interchangeable. Is everything the same on these trucks. For example can I buy a front brake kit for a C series chev and put it on my GMC. I was looking at the Classic Industries catalogues and the pictures of the parts look like the ones in my truck.

08-11-2006, 11:56 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Are chevrolet and GMC parts completely interchangeable? Pretty much. The only thing that will throw you for a loop, is the front fenders. inn69, chevy went to a new fender... GMC kept the 68 style, and ran it untill 72. The grill is pbviously not the same as chevy, and the 68 fenders are needed to run it. Other than that, it's prettymuch all cosmetic stuff and little details. Other than that, the GMC is the same as the chevy. Well, the GMC had a v-6 avalible that chevy didn't get...

08-11-2006, 12:05 PM	#3
PonyX Registered User Join Date: Aug 2006 Location: Calgary Posts: 17	Re: Are chevrolet and GMC parts completely interchangeable? Hey thanks for the info.

08-11-2006, 01:46 PM	#4
bryanw1968 Senior Member Join Date: Jul 2006 Location: Leander, Texas Posts: 850	Re: Are chevrolet and GMC parts completely interchangeable? Did GMC 1/2 ton 2 wheel drive trucks come with springs or leafs? I thought they came with leafs as the GMC used to be considered more of a work truck?

08-11-2006, 02:14 PM	#5
PonyX Registered User Join Date: Aug 2006 Location: Calgary Posts: 17	Re: Are chevrolet and GMC parts completely interchangeable? Mine has leaf springs. I have not been under the truck yet to have a good look around. I had heard the same kind of think about GMC being more of a work truck.

08-11-2006, 02:19 PM	#6
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Are chevrolet and GMC parts completely interchangeable? In GENERAL Chevy 1/2 ton 2wd trucks came with all coils and GMC trucks came with all Leafs... BUT you could order either truck with either set-up or a mix of the two. For example, I've seen a lot of chevys with leaf rears and coil fronts, and I've seen a lot of GMCs (actually most of the GMC's I have seen) have had the leaf rear with the coil front. I have a coil suspension off a 71 GMC under my 67 Chevy Does your truck have leafs in the front too? __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 08-11-2006 at 02:20 PM.

08-11-2006, 02:45 PM	#7
Gary Senior Member Join Date: Jan 2004 Location: Harvest, AL Posts: 544	Re: Are chevrolet and GMC parts completely interchangeable? Leaf rear/coil front on my 72 GMC. I put new coils up front, leafs in back to lower it. __________________ Gary Harris 85 Silverado - 87 Grand National 2007 Ardmore Car Show

08-11-2006, 05:30 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Are chevrolet and GMC parts completely interchangeable? 4 wheel drive had leafs all around. Period 2 wheel drive, 10 - 30, had coils up front. Period. Both of those are for Chevy, and GMC. Generally, GMC had leafs standard in back. However, sometimes there were coils oin back on GMC trucks, and it had not been specified on the SPID. I have personally seen this on a small block LWB 1/2 ton, a V-6 SWB 1/2 ton, and on an inline LWB 1/2 ton... all 3 were 1969 models.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.