67 passenger side fender - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70short/step · 08-06-2006, 08:15 PM

For Sale:
67 passenger side fender. Comes with hood spring, inner fender, molding and emblem also. I dont see any damage other than some light surface rust. I wont ship so pick up only or may meet 1/2 way close, for a fee. Located in Stockton, Ca.
Price is $125.00
Please only reply here in thread.
Thanks, 70short/step

**DREW67** · 08-07-2006, 08:14 AM

How far are you from Onterio CA.?

**special-K** · 08-07-2006, 08:20 AM

You non-shippers are killing me

.

67chevy2wd · 08-07-2006, 10:03 AM

I hear ya on the non-shippers, there isn't much for board members selling parts up around my area. Everything is down south or way east or west.

**67sss** · 08-07-2006, 10:47 AM

I'd like to see closer pics. Would you deliver this to Fresno?

70short/step · 08-07-2006, 05:34 PM

DREW67: About 360 miles
special-K: Sorry but it isnt worth it. Talked about that in another thread.
67chevy2wd: It wouldnt be worth shipping it.
67sss: I can enlarge the pic for you if you want it closer, or do you want pics of different angles or something?? Fresno is just over 2 hours away and a little too far. Needs to be closer.

67chevy2wd · 08-07-2006, 05:44 PM

Just out of curiosity do you know what shipping would be to ND? I was just giving you non-shippers a hard time it is no bid deal I understand.

70short/step · 08-07-2006, 06:29 PM

I have no idea what it would cost to ship. But the hours I work and the time it would take for me to do it. Thats what I meant by it wouldnt be worth it.
If it was like the last fender around and you couldnt buy it new, well then it might be worth it. Sorry.

**special-K** · 08-08-2006, 07:46 AM

That`s your right,not questioning that.I think the shipping thing is a PITA,myself.But,I think all selling is.I would have bought it by now and you would be able to ship at your convenience.You`re in an area where you can always find another good one,many others here aren`t.And,I use clean used parts until there are none left,then I`ll consider repro.

**67sss** · 08-08-2006, 09:47 AM

I would like to see the bottom of the fender, like the edges that are on the cement. How much would you charge to drive to Fresno? I work for a freight company and that our closest terminal.

70short/step · 08-08-2006, 07:10 PM

Fresno is over 120 miles from me. Thats over 240 miles round trip. My truck get 10 miles to the gallon. Thats over $75.00 in just gas, Plus over 4 hours of my driving time.
Sorry, not worth it to me.

**special-K** · 08-11-2006, 07:12 AM

I`d make it worth your trouble to send on Greyhound,21771

.

70short/step · 08-11-2006, 07:00 PM

OK Special-K.
You wore me down. Make it worth it to me to ship it to you. My zip is 95204, there is a Greyhound station downtown. I probablly wouldnt be able to make it down there till next Thursday or Friday. Can you find out from your end the cost and what I need to do for them to ship it.
Let me know.
Perry

**special-K** · 08-11-2006, 10:39 PM

Whoa!!Holy moly,sure thing

.I never thought I had such power.I`ll get a price tommorrow.Ps,I don`t need the hinge.I`ll get the info.

**special-K** · 08-12-2006, 07:44 AM

I put in 40# and 60" for largest dimension and got a quote of $55.You just need to wrap it in cardboard/tape.If you found a box,that would help or bubble wrap inside the cardboard.If this fender has no rust it is worth it to me.I`m not talking about light surface rust on the top or bottom from grit thrown at it.I mean in the front cup under the battery,etc.The fender looks very clean to me.If it is as straight as it looks in the picture,it is as good as n.o.s. to me and I`d send you $200 for your trouble.If you feel I should see more,please post.

70short/step · 08-12-2006, 12:33 PM

I will take pics of it again inside and out to show you the whole thing. And you dont want the hood hinge, right? I will wrap it up good for you. If you want you can PM your address to me.
I just hope you dont want all the other stuff that I am going to put up on here shipped, because I think this is it. Well maybe I might ship if this time works out OK.
Perry

08-06-2006, 08:15 PM	#1
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	67 passenger side fender For Sale: 67 passenger side fender. Comes with hood spring, inner fender, molding and emblem also. I dont see any damage other than some light surface rust. I wont ship so pick up only or may meet 1/2 way close, for a fee. Located in Stockton, Ca. Price is $125.00 Please only reply here in thread. Thanks, 70short/step __________________ For every person with a spark of genius, There are a hundred with ignition trouble. 70 Short/Step

08-07-2006, 08:14 AM	#2
DREW67 Senior Member Join Date: Aug 2001 Location: Kansas City, Mo Posts: 1,029	Re: 67 passenger side fender How far are you from Onterio CA.? __________________ DREW67

08-07-2006, 08:20 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 67 passenger side fender You non-shippers are killing me. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-07-2006, 10:03 AM	#4
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	Re: 67 passenger side fender I hear ya on the non-shippers, there isn't much for board members selling parts up around my area. Everything is down south or way east or west. __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban Last edited by 67chevy2wd; 08-07-2006 at 10:03 AM.

08-07-2006, 10:47 AM	#5
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,324	Re: 67 passenger side fender I'd like to see closer pics. Would you deliver this to Fresno?

08-07-2006, 05:34 PM	#6
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	Re: 67 passenger side fender DREW67: About 360 miles special-K: Sorry but it isnt worth it. Talked about that in another thread. 67chevy2wd: It wouldnt be worth shipping it. 67sss: I can enlarge the pic for you if you want it closer, or do you want pics of different angles or something?? Fresno is just over 2 hours away and a little too far. Needs to be closer. __________________ For every person with a spark of genius, There are a hundred with ignition trouble. 70 Short/Step

08-07-2006, 05:44 PM	#7
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	Re: 67 passenger side fender Just out of curiosity do you know what shipping would be to ND? I was just giving you non-shippers a hard time it is no bid deal I understand. __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban

08-07-2006, 06:29 PM	#8
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	Re: 67 passenger side fender I have no idea what it would cost to ship. But the hours I work and the time it would take for me to do it. Thats what I meant by it wouldnt be worth it. If it was like the last fender around and you couldnt buy it new, well then it might be worth it. Sorry. __________________ For every person with a spark of genius, There are a hundred with ignition trouble. 70 Short/Step

08-08-2006, 07:46 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 67 passenger side fender That`s your right,not questioning that.I think the shipping thing is a PITA,myself.But,I think all selling is.I would have bought it by now and you would be able to ship at your convenience.You`re in an area where you can always find another good one,many others here aren`t.And,I use clean used parts until there are none left,then I`ll consider repro. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-08-2006, 09:47 AM	#10
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,324	Re: 67 passenger side fender I would like to see the bottom of the fender, like the edges that are on the cement. How much would you charge to drive to Fresno? I work for a freight company and that our closest terminal.

08-08-2006, 07:10 PM	#11
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	Re: 67 passenger side fender Fresno is over 120 miles from me. Thats over 240 miles round trip. My truck get 10 miles to the gallon. Thats over $75.00 in just gas, Plus over 4 hours of my driving time. Sorry, not worth it to me. __________________ For every person with a spark of genius, There are a hundred with ignition trouble. 70 Short/Step

08-11-2006, 07:12 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 67 passenger side fender I`d make it worth your trouble to send on Greyhound,21771. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-11-2006, 07:00 PM	#13
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	Re: 67 passenger side fender OK Special-K. You wore me down. Make it worth it to me to ship it to you. My zip is 95204, there is a Greyhound station downtown. I probablly wouldnt be able to make it down there till next Thursday or Friday. Can you find out from your end the cost and what I need to do for them to ship it. Let me know. Perry __________________ For every person with a spark of genius, There are a hundred with ignition trouble. 70 Short/Step

08-11-2006, 10:39 PM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 67 passenger side fender Whoa!!Holy moly,sure thing.I never thought I had such power.I`ll get a price tommorrow.Ps,I don`t need the hinge.I`ll get the info. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-12-2006, 07:44 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 67 passenger side fender I put in 40# and 60" for largest dimension and got a quote of $55.You just need to wrap it in cardboard/tape.If you found a box,that would help or bubble wrap inside the cardboard.If this fender has no rust it is worth it to me.I`m not talking about light surface rust on the top or bottom from grit thrown at it.I mean in the front cup under the battery,etc.The fender looks very clean to me.If it is as straight as it looks in the picture,it is as good as n.o.s. to me and I`d send you $200 for your trouble.If you feel I should see more,please post. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

08-12-2006, 12:33 PM	#16
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	Re: 67 passenger side fender I will take pics of it again inside and out to show you the whole thing. And you dont want the hood hinge, right? I will wrap it up good for you. If you want you can PM your address to me. I just hope you dont want all the other stuff that I am going to put up on here shipped, because I think this is it. Well maybe I might ship if this time works out OK. Perry __________________ For every person with a spark of genius, There are a hundred with ignition trouble. 70 Short/Step

Register or Log In To remove these advertisements.