WTB: three groove crank pulley - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Joe67 · 07-11-2006, 10:19 AM

I am trying to get my pwr steering going on my '67 Panel truck. I have a 327 V8 and a factory pwr steering setup.

I have a 3 groove pulley, but it is for a long water pump.

Does anyone have a SBC 3 groove crank pulley for a short water pump?

Any pics of this setup installed on a V8 out there?

5150 · 07-11-2006, 11:12 AM

Since I offered mine to powell this morning he's got first dibs on it, but if he doesn't want it you can have it. It's for a short pump also.

Joe67 · 07-11-2006, 11:27 AM

Thanks, let me know what he says

drink2mny · 07-12-2006, 11:30 PM

you still need pulleys

Joe67 · 07-13-2006, 11:18 AM

Yes Drink.
What am I looking at there?

drink2mny · 07-13-2006, 12:29 PM

Those are 2 bead blasted pulleys. One is a cast style 2 groove and the other is the steel type 1 groove that the cast sits on/seated onto with the 2 aligment holes.

tha damage would be $50.00 shipped to your door.

Joe67 · 07-13-2006, 01:12 PM

Very nice pieces. That is more then I am looking to spend on the panel right now. Thanks anyway

ChevyDude · 07-13-2006, 06:25 PM

I believe I have one. It's a stock SBC for a short WP. If you still need one let me know.

Joe67 · 07-13-2006, 07:44 PM

Quote:

Originally Posted by ChevyDude

I believe I have one. It's a stock SBC for a short WP. If you still need one let me know.

That's the one. What is the condition and how much shipped to 48035?
Any pics?

ChevyDude · 07-14-2006, 10:15 AM

Quote:

Originally Posted by Joe67

That's the one. What is the condition and how much shipped to 48035?
Any pics?

Like new condition, I blasted it, primed and painted hammered silver. $10 bucks plus the ride. Yes I can take a pic. Have to be a little later today...gotta run right now.

Joe67 · 07-14-2006, 10:40 AM

Quote:

Originally Posted by ChevyDude

Like new condition, I blasted it, primed and painted hammered silver. $10 bucks plus the ride. Yes I can take a pic. Have to be a little later today...gotta run right now.

Can you confirm the mounting holes are about 3 3/4" apart?
let me know how much to ship it.

Thanks.

ChevyDude · 07-14-2006, 02:26 PM

Joe, SBC short waterpump 3 groove pulley...holes are 2 3/4" apart....if you burn an inch the tape reads 3 3/4". It weighs 3.5 lbs,,,so probably 6 bucks gets it to you.

Alex

Joe67 · 07-14-2006, 03:05 PM

Quote:

Originally Posted by ChevyDude

Joe, SBC short waterpump 3 groove pulley...holes are 2 3/4" apart....if you burn an inch the tape reads 3 3/4". It weighs 3.5 lbs,,,so probably 6 bucks gets it to you.

Alex

Correct, my typo. That should do it.

$16.00 ?
Let me know how you'd like me to pay, check, MO or paypal.

Thanks - Joe

ChevyDude · 07-14-2006, 05:00 PM

PM sent.

Joe67 · 08-09-2006, 07:56 AM

Chevydude - pulley arrived. Thank You!!!

Joe67 · 08-16-2006, 07:35 AM

OK. I found out I need a different type of crank pulley.

The pulley pictured above sits about an inch or so away from the balancer. It looks like I need the type that sits flush.

There is a pic from Fred T of what I am looking for in this thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=208162

Does anyone have one they'd like to part with?

07-11-2006, 10:19 AM	#1
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	WTB: three groove crank pulley I am trying to get my pwr steering going on my '67 Panel truck. I have a 327 V8 and a factory pwr steering setup. I have a 3 groove pulley, but it is for a long water pump. Does anyone have a SBC 3 groove crank pulley for a short water pump? Any pics of this setup installed on a V8 out there? __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

07-11-2006, 11:12 AM	#2
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,281	Re: WTB: three groove crank pulley Since I offered mine to powell this morning he's got first dibs on it, but if he doesn't want it you can have it. It's for a short pump also. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

07-11-2006, 11:27 AM	#3
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: WTB: three groove crank pulley Thanks, let me know what he says __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

07-12-2006, 11:30 PM	#4
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	Re: WTB: three groove crank pulley you still need pulleys Attached Images __________________ Support The Board

07-13-2006, 11:18 AM	#5
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: WTB: three groove crank pulley Yes Drink. What am I looking at there? __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

07-13-2006, 12:29 PM	#6
drink2mny Registered User Join Date: Jun 2003 Location: spokane wa Posts: 2,189	Re: WTB: three groove crank pulley Those are 2 bead blasted pulleys. One is a cast style 2 groove and the other is the steel type 1 groove that the cast sits on/seated onto with the 2 aligment holes. tha damage would be $50.00 shipped to your door. __________________ Support The Board

07-13-2006, 01:12 PM	#7
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: WTB: three groove crank pulley Very nice pieces. That is more then I am looking to spend on the panel right now. Thanks anyway __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

07-13-2006, 06:25 PM	#8
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: WTB: three groove crank pulley I believe I have one. It's a stock SBC for a short WP. If you still need one let me know.

07-14-2006, 02:26 PM	#12
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: WTB: three groove crank pulley Joe, SBC short waterpump 3 groove pulley...holes are 2 3/4" apart....if you burn an inch the tape reads 3 3/4". It weighs 3.5 lbs,,,so probably 6 bucks gets it to you. Alex Attached Images

07-14-2006, 05:00 PM	#14
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: WTB: three groove crank pulley PM sent.

08-09-2006, 07:56 AM	#15
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: WTB: three groove crank pulley Chevydude - pulley arrived. Thank You!!! __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

08-16-2006, 07:35 AM	#16
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: WTB: three groove crank pulley OK. I found out I need a different type of crank pulley. The pulley pictured above sits about an inch or so away from the balancer. It looks like I need the type that sits flush. There is a pic from Fred T of what I am looking for in this thread: http://67-72chevytrucks.com/vboard/s...d.php?t=208162 Does anyone have one they'd like to part with? __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.