The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Suspension

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-12-2006, 12:04 AM   #1
steemin_ehman
False Lies
 
steemin_ehman's Avatar
 
Join Date: Feb 2006
Location: Esterhazy, SK
Posts: 305
air bags or coils with dropped spindles?

ok, heres what i want to accomplish.
an awesome ride hight for a daily summer driver.. =cheap costs.
i already did the no-no of cutting my coil springs.. but i couldnt afford much better, but now im thinking maybe i should go down the proper road, as i was to lower it another 2 1/2", to make the top of the tire at the bottom of the fender. now, i dont know whether i want to buy some air bags (hook them up to valve stems to be later hooked to a compressor down the road), or some drop spindles. im looking for the best, cheapest way to get results... (if possible) thanx for your help!!! -kyle
Attached Images
  
__________________
Kyle (Steemin) Ehman

-1979 Chevy CCLB, 6.7L Cummins swap - Project "RAMERADO"
-2015 Yukon XL Denali (Family ride)
-1977 Chevy stepside, carb'ed vortec 350 (SOLD)
-Father of three daughters who will also have something cool...
steemin_ehman is offline   Reply With Quote
Old 08-12-2006, 12:30 AM   #2
BarryB
Senior Member
 
BarryB's Avatar
 
Join Date: Jul 2006
Location: Blountville, Tn.
Posts: 3,904
Re: air bags or coils with droped spindles?

I would put bags in. reason for them is. When you park at a show you can drop your truck low. Plus you get that riding on air feel. That is what I am wanting to do to my truck.
My opinion.
BarryB is offline   Reply With Quote
Old 08-12-2006, 07:09 AM   #3
LUV2XCLR8
The LuvShack Garage
 
LUV2XCLR8's Avatar
 
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,475
Re: air bags or coils with droped spindles?

Bag it Baby

But ...............................................

Drop coils will be alot cheaper
__________________
Owner/Op: "TN Classic Transport Carriers"
The Toy: "Square Vette" 72 Hybrid Blazer
Toy Barn: "LuvShack" 40 x 60 x 20 Shop
Big Piggy: "Goliath" 07 Kodiak C4500
Lil Piggy:"Maddy" 88 Silverado 3500
Hauler: "Feathers" 14 Aluma 8218T
LUV2XCLR8 is offline   Reply With Quote
Old 08-12-2006, 02:15 PM   #4
steemin_ehman
False Lies
 
steemin_ehman's Avatar
 
Join Date: Feb 2006
Location: Esterhazy, SK
Posts: 305
Re: air bags or coils with droped spindles?

im leaning towards bags too i think
__________________
Kyle (Steemin) Ehman

-1979 Chevy CCLB, 6.7L Cummins swap - Project "RAMERADO"
-2015 Yukon XL Denali (Family ride)
-1977 Chevy stepside, carb'ed vortec 350 (SOLD)
-Father of three daughters who will also have something cool...
steemin_ehman is offline   Reply With Quote
Old 08-12-2006, 02:38 PM   #5
N2TRUX
Happy to be here
 
N2TRUX's Avatar
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
Re: air bags or coils with droped spindles?

Coils are the cheapest way to get a static drop. Spindles are better because they don't effect the ride but cost a little more. Bags will offer you adjustability in your height.

My suggestion would be to buy the spindles now, and add bags later when you can afford a complete set up...
__________________
Follow me on Facebook and Instagram @N2trux.com

Articles-

"Jake" the 84 to 74 crewcab

"Elwood" the77_Remix

85 GMC Sierra "Scarlett"

"Refining Sierra"
N2TRUX is offline   Reply With Quote
Old 08-13-2006, 04:45 PM   #6
steemin_ehman
False Lies
 
steemin_ehman's Avatar
 
Join Date: Feb 2006
Location: Esterhazy, SK
Posts: 305
Re: air bags or coils with droped spindles?

guess what!! my girlfriend's dad had 2 firestone bags that he said i could have.. no cost!! muhuhahaha!!! so, im gonna bag it. -kyle
__________________
Kyle (Steemin) Ehman

-1979 Chevy CCLB, 6.7L Cummins swap - Project "RAMERADO"
-2015 Yukon XL Denali (Family ride)
-1977 Chevy stepside, carb'ed vortec 350 (SOLD)
-Father of three daughters who will also have something cool...
steemin_ehman is offline   Reply With Quote
Old 08-13-2006, 05:41 PM   #7
Shane
Account Suspended
 
Shane's Avatar
 
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
Re: air bags or coils with droped spindles?

uhhmmm ... you're gonna need more than just the bags ... tank ... brackets ... valves ... compressor ... air line ...

the bags is one of the least expensive components in a "bag" system.
Shane is offline   Reply With Quote
Old 08-14-2006, 08:16 PM   #8
steemin_ehman
False Lies
 
steemin_ehman's Avatar
 
Join Date: Feb 2006
Location: Esterhazy, SK
Posts: 305
Re: air bags or coils with droped spindles?

well, for now, all im hooking up is 2 bags in the front. there is some line that came with them, more than long enough attached to some valve stems. so, therefore, all i have to fabricate or buy is some bracket/adaptors to put in place of my coil springs. this should work right??
__________________
Kyle (Steemin) Ehman

-1979 Chevy CCLB, 6.7L Cummins swap - Project "RAMERADO"
-2015 Yukon XL Denali (Family ride)
-1977 Chevy stepside, carb'ed vortec 350 (SOLD)
-Father of three daughters who will also have something cool...
steemin_ehman is offline   Reply With Quote
Old 08-14-2006, 11:14 PM   #9
N2TRUX
Happy to be here
 
N2TRUX's Avatar
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,023
Re: air bags or coils with droped spindles?

Ok, so your going to do this on the cheap. Go to www.***************** and buy two bag plates, and two bag cups. This will give you what you need to remove your coil springs and have the start of a system.

Make sure you route your line away from anything that will rub a hole, or melt the line.
__________________
Follow me on Facebook and Instagram @N2trux.com

Articles-

"Jake" the 84 to 74 crewcab

"Elwood" the77_Remix

85 GMC Sierra "Scarlett"

"Refining Sierra"
N2TRUX is offline   Reply With Quote
Old 08-15-2006, 10:00 AM   #10
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,837
Re: air bags or coils with droped spindles?

Just remember "cheap" and "safe" don't always go together. Anytime I do suspension, steering or brakes - I hesitate to put those 2 words in the same sentence. JMHO.
Hart_Rod is offline   Reply With Quote
Old 08-15-2006, 10:08 AM   #11
Shane
Account Suspended
 
Shane's Avatar
 
Join Date: Jun 2000
Location: over yonder
Posts: 14,270
Re: air bags or coils with droped spindles?

Shane is offline   Reply With Quote
Old 08-15-2006, 02:08 PM   #12
steemin_ehman
False Lies
 
steemin_ehman's Avatar
 
Join Date: Feb 2006
Location: Esterhazy, SK
Posts: 305
Re: air bags or coils with droped spindles?

i've took everything into consideration, and decided to go with some drop coils, the truck sits about 2" lower than in the first picture at the top of the page, im pretty happy with the results.. except, the rear needs to come down. i attached some pictures of the way it sits now. i put a 5" drop lowering kit on it (shackles and hangers)... i shoulda put a flip kit in... to lower i think im gonna make some brakets to put those air bags in, and run just a mono leaf spring.. and of course notch the frame. then i can adjust the hight, and make er what i want it to be.. correct?
Attached Images
   
__________________
Kyle (Steemin) Ehman

-1979 Chevy CCLB, 6.7L Cummins swap - Project "RAMERADO"
-2015 Yukon XL Denali (Family ride)
-1977 Chevy stepside, carb'ed vortec 350 (SOLD)
-Father of three daughters who will also have something cool...

Last edited by steemin_ehman; 08-15-2006 at 02:16 PM.
steemin_ehman is offline   Reply With Quote
Old 08-15-2006, 04:48 PM   #13
67Fleet
Outlandish Trends - FL
 
67Fleet's Avatar
 
Join Date: Jul 2005
Location: Orlando
Posts: 1,396
Re: air bags or coils with droped spindles?

Gotta love the milk crate seat!!
Here's my $.02. Spend the money now and do the spindles. You're going to want them later anyway. You can get a good set for about $250. Check McGaughy's or Belltech. As said, you can run bags, but you're gonna need upper plates, bags, lower cups, fittings to go into the bags and some line and you can run the line into 2 schrader valves to fill when you need to and then you can get a portable air tank to fill them, but realize that the front end is heavy and it takes a lot of psi to fill them up. On my '67 it takes 100psi in my tanks to raise the front end. On a portable 3 gallon tank you may or may not be able to get enough air in their to fill the bags 1 time. Forget about filling it twice. And if you have any kind of leak at all and all you have is that portable tank, you're gonna be screwed and will be left stranded. And that sucks! Good luck, but I'd go static for now, whatever you decide to do, don't skimp out on suspension/chassis components. It's yours and everyone else on the road around you's safety at risk. Keep that in mind.
__________________
-Bret
67 short-fleet sold!
67Fleet is offline   Reply With Quote
Old 08-16-2006, 05:55 PM   #14
steemin_ehman
False Lies
 
steemin_ehman's Avatar
 
Join Date: Feb 2006
Location: Esterhazy, SK
Posts: 305
Re: air bags or coils with dropped spindles?

alright! thanx for the information!!!!!! much apreciated. static drop is what its gonna be... its the best i can afford right now, and suits my needs perfectly. -kyle
__________________
Kyle (Steemin) Ehman

-1979 Chevy CCLB, 6.7L Cummins swap - Project "RAMERADO"
-2015 Yukon XL Denali (Family ride)
-1977 Chevy stepside, carb'ed vortec 350 (SOLD)
-Father of three daughters who will also have something cool...
steemin_ehman is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:31 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com