|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-21-2006, 08:00 PM
|
#1 |
|
AttentionDeficitDisorder
Join Date: Mar 2005
Location: COLORADO
Posts: 600
|
1972 Chevy C-10 Shortbed Chopped Bagged Tubbed
 Anyone around here cut glass? 
|
|
|
|
08-21-2006, 08:30 PM
|
#2 |
|
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,733
|
Re: 1972 Chevy C-10 Shortbed Chopped Bagged Tubbed
Cool
|
|
|
|
|
08-21-2006, 08:54 PM
|
#3 |
|
Senior Member
Join Date: Aug 2005
Location: tulsa OK
Posts: 3,070
|
Re: 1972 Chevy C-10 Shortbed Chopped Bagged Tubbed
beds body lines dont line up.... post pics from the back, looks cool so far
|
|
|
|
|
08-21-2006, 09:45 PM
|
#4 |
|
WTB this ad
Join Date: Sep 2004
Location: Lafayette Georgia
Posts: 5,074
|
Re: 1972 Chevy C-10 Shortbed Chopped Bagged Tubbed
Looks like quite a start you have there! I do think I have seen more than one chop project sidelined due to a lack of glass. Good luck my friend!
|
|
|
|
|
08-21-2006, 10:41 PM
|
#5 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: 1972 Chevy C-10 Shortbed Chopped Bagged Tubbed
Lookin good! How much did you lop off the top? As far as the glass, most any glass shop can cut the flat safety sheet, but the windsheild is a little more tricky. It will take a very patient glass cutter ,with some experience & expect to spend some cash
 Best of luck, L
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... Last edited by crazy longhorn; 08-21-2006 at 10:43 PM. |
|
|
|
|
08-22-2006, 12:08 AM
|
#6 |
|
Account Suspended
Join Date: Dec 2005
Location: SPOKANE, WASHINGTON
Posts: 1,001
|
Re: 1972 Chevy C-10 Shortbed Chopped Bagged Tubbed
Looking good. Did you Z the frame to get it down there?
|
|
|
|
|
08-22-2006, 12:00 PM
|
#7 |
|
AttentionDeficitDisorder
Join Date: Mar 2005
Location: COLORADO
Posts: 600
|
Re: 1972 Chevy C-10 Shortbed Chopped Bagged Tubbed
No Z, just spindles and tubular arms. 3.5" off the top. The entire body is just sitting on the frame nothing is bolted up. Had everything off the chassis did all the chassis work blasted painted frame and put everything back on it to make it look like a truck again. Still far from done. Thanks for all the nice comments.
|
|
|
|
|
08-22-2006, 05:59 PM
|
#8 |
|
Where's my beer?
Join Date: Aug 2002
Location: I live in the state of denial....
Posts: 5,620
|
Re: 1972 Chevy C-10 Shortbed Chopped Bagged Tubbed
Why did you cut the roof in 4 sections?
__________________
Paul How do you make the invisible, visible?.........You take it away. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
