Soon to be released for 67-72 trucks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Musclerodz · 08-22-2006, 12:18 PM

Billet pedal covers to fit 67-72 trucks, Blazers, and Suburbans. 2 piece billet design, high quality part. They were prototyped on my '69 K5 by MODO Innovations. Shown is both gas pedals for 67-70 and 71-72, brake pedal which is the same for auto, manual, and the clutch pedal, and the e-brake for 69-72. I have contacted Josh and as soon as he gets back to me to be set up as a Vendor, these will be for sale.

Mike

Putter · 08-22-2006, 02:58 PM

Quick question....
On the brake and clutch pedals....are those made so you remove the rubber and then attach those directly to the steel surface?
I think that is what I see in the photo. I personally care for the 'autozone' ones that just clamp on and won't stay put.

Inthuwind · 08-22-2006, 03:22 PM

I can see those in mine and painted inserts~~sharp!

tom71 · 08-22-2006, 04:18 PM

price?????

Musclerodz · 08-22-2006, 04:24 PM

Quote:

Originally Posted by Putter

Quick question....
On the brake and clutch pedals....are those made so you remove the rubber and then attach those directly to the steel surface?
I think that is what I see in the photo. I personally care for the 'autozone' ones that just clamp on and won't stay put.

Correct, you remove the rubber and drill attachment holes for the screws and nuts. No chance of the coming off.

Tom, I need to hold off on price until Josh approves my vendor status and I will post them in the for sale section at that time. They aren't cheap like the Autozone crap, but good parts never are.

Mike

Putter · 08-22-2006, 04:37 PM

Next question....
Is each pedal priced individually? Or is there an "automatic" kit and a "manual" kit?
Just curious. I have automatic, but no e-brake.

**1970 CST Short Wide** · 08-22-2006, 04:49 PM

Those would go nice with my other Billit stuff. I'll be looking for them in the 4 sale section

LUV2XCLR8 · 08-22-2006, 04:50 PM

WoW, we need more details on these, possible SS version in the future?

You knew I was gonna ask that one, No billet on GQ but lots & lots of SS

Musclerodz · 08-22-2006, 05:24 PM

Quote:

Originally Posted by Putter

Next question....
Is each pedal priced individually? Or is there an "automatic" kit and a "manual" kit?
Just curious. I have automatic, but no e-brake.

There will be "kits" for each setup. 67-68, 69-70, 71-72 manual or auto.

Mike

*bskylerj* · 08-22-2006, 05:46 PM

I WANT A SET. I NEED A SET. Let us know. I would love to be your tester on this. LOL...

just kidding. keep us informed though as I will order a set for my 71.

jimmydean · 08-22-2006, 06:17 PM

How does the gas pedal work? My stock one doesn't stay on, so I have been using just the bar that comes off the firewall.

Those look great, I might have to get some if the gas pedal will work.

68gmcdually · 08-22-2006, 06:22 PM

Quote:

Originally Posted by jimmydean

...My stock one doesn't stay on, so I have been using just the bar that comes off the firewall..

Glad that I am not the only one doing that, been working fine like that for over a year now.

1LoC10 · 08-22-2006, 06:31 PM

haha, thats funny.. i shoved my gas pedal under my seat and am just using the bar as well... i actually like it better than it being all the way to the floor like that

Jerry Jones · 08-22-2006, 07:00 PM

Looks great, I'm in.

76bonanza · 08-22-2006, 07:14 PM

Cool will be waiting.

GREASEMONKEY72 · 08-22-2006, 08:18 PM

depending on price i could see a set of those in my truck but my gas pedal is still on

project1971 · 08-22-2006, 08:39 PM

yeah very interested!

Gary · 08-22-2006, 10:46 PM

It's a matter of price but I could see wanting a set depending on cost.

hugger69SWBCST · 08-24-2006, 10:21 PM

Those would look nice, maybe you guys like those little feet for pedals to.Me? I like the ones that came with the truck. Rubber with the steel frame around them.

08-22-2006, 12:18 PM	#1
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,365	Soon to be released for 67-72 trucks Billet pedal covers to fit 67-72 trucks, Blazers, and Suburbans. 2 piece billet design, high quality part. They were prototyped on my '69 K5 by MODO Innovations. Shown is both gas pedals for 67-70 and 71-72, brake pedal which is the same for auto, manual, and the clutch pedal, and the e-brake for 69-72. I have contacted Josh and as soon as he gets back to me to be set up as a Vendor, these will be for sale. Mike Attached Images __________________ Mike Redpath Last edited by Musclerodz; 08-22-2006 at 12:19 PM.

08-22-2006, 02:58 PM	#2
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Soon to be released for 67-72 trucks Quick question.... On the brake and clutch pedals....are those made so you remove the rubber and then attach those directly to the steel surface? I think that is what I see in the photo. I personally care for the 'autozone' ones that just clamp on and won't stay put. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

08-22-2006, 03:22 PM	#3
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: Soon to be released for 67-72 trucks I can see those in mine and painted inserts~~sharp! __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

08-22-2006, 04:18 PM	#4
tom71 what happened to flint mi Join Date: Oct 2005 Location: san diego Posts: 437	Re: Soon to be released for 67-72 trucks price????? __________________ 71 swb 2wd fleet frame off in progress 72 4x4 blazer daily driver 70 olds cutlass s mint condition owned by a grandma 56 gmc 2wd project waitng 97 fiance mobile

08-22-2006, 04:37 PM	#6
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Soon to be released for 67-72 trucks Next question.... Is each pedal priced individually? Or is there an "automatic" kit and a "manual" kit? Just curious. I have automatic, but no e-brake. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

08-22-2006, 04:49 PM	#7
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,111	Re: Soon to be released for 67-72 trucks Those would go nice with my other Billit stuff. I'll be looking for them in the 4 sale section __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2019 GMC Diesil Dually. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

08-22-2006, 04:50 PM	#8
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,475	Re: Soon to be released for 67-72 trucks WoW, we need more details on these, possible SS version in the future? You knew I was gonna ask that one, No billet on GQ but lots & lots of SS __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-22-2006, 05:46 PM	#10
bskylerj Account Suspended Join Date: Dec 2005 Location: SPOKANE, WASHINGTON Posts: 1,001	Re: Soon to be released for 67-72 trucks I WANT A SET. I NEED A SET. Let us know. I would love to be your tester on this. LOL... just kidding. keep us informed though as I will order a set for my 71.

08-22-2006, 06:17 PM	#11
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Soon to be released for 67-72 trucks How does the gas pedal work? My stock one doesn't stay on, so I have been using just the bar that comes off the firewall. Those look great, I might have to get some if the gas pedal will work.

08-22-2006, 06:31 PM	#13
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Soon to be released for 67-72 trucks haha, thats funny.. i shoved my gas pedal under my seat and am just using the bar as well... i actually like it better than it being all the way to the floor like that __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

08-22-2006, 07:00 PM	#14
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,408	Re: Soon to be released for 67-72 trucks Looks great, I'm in. __________________ RIP El Jay! Love you brother!

08-22-2006, 07:14 PM	#15
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: Soon to be released for 67-72 trucks Cool will be waiting. __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

08-22-2006, 08:18 PM	#16
GREASEMONKEY72 Registered User Join Date: Aug 2006 Location: Bakersfield,CA Posts: 7,893	Re: Soon to be released for 67-72 trucks depending on price i could see a set of those in my truck but my gas pedal is still on __________________ -steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME

08-22-2006, 08:39 PM	#17
project1971 Registered User Join Date: Apr 2003 Location: Oklahoma City Posts: 605	Re: Soon to be released for 67-72 trucks yeah very interested! __________________ 2008 Ford FX2 Screw 1971 C10 project in shop now! 2004 Pontiac Grandam (wifes) 2000 Cavalier z24 (gas saver)

08-22-2006, 10:46 PM	#18
Gary Senior Member Join Date: Jan 2004 Location: Harvest, AL Posts: 545	Re: Soon to be released for 67-72 trucks It's a matter of price but I could see wanting a set depending on cost. __________________ Gary Harris 85 Silverado - 87 Grand National 2007 Ardmore Car Show



Register or Log In To remove these advertisements.

08-24-2006, 10:21 PM	#19
hugger69SWBCST Registered User Join Date: May 2006 Location: Rogers, Arkansas Posts: 52	Re: Soon to be released for 67-72 trucks Those would look nice, maybe you guys like those little feet for pedals to.Me? I like the ones that came with the truck. Rubber with the steel frame around them.

Register or Log In To remove these advertisements.