|
10-18-2002, 10:25 AM
|
#1 |
|
Registered User
Join Date: Jul 2002
Location: Massachusettes
Posts: 22
|
cab mounts
Anyone mod their cab mounts to achieve an extra inch or so drop? What I mean is, the rubber mounts seem to be quite thick and there also looks to be 1.5 inches between frame rails and floor. Could I use some thinner urethane bushings?
Just a thought.
__________________
Tristen '71 C-10 Shaved and ready to lay some DP-90 |
|
|
|
10-18-2002, 10:41 AM
|
#2 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
I dropped the body 1 1/2" on the longhorn, by moving the mounts down on the frame. You may get by with a little drop using urathane, but I had to open the floor up for clearance,& also notch the back of the cab & rear support brace(the rubber mounts flex a bit). the front frame horns were also cut off &dropped, & the mount lips on the box were cut off and moved up........quite a little project, but with 3/5 on the suspension & 1 1/2 on the body i have the stance I wanted without pcs scraping on the pavement. crazy longhorn
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
